From f8c8d8bc72b2a87d2b2e3d583a052d8f0e5d22ea Mon Sep 17 00:00:00 2001 From: dbrownell Date: Wed, 7 Oct 2009 16:15:21 +0000 Subject: [PATCH] Remove pointless "target library" chapter. It had a very little bit of content; move that to the more extensive chapter on config file guidelines, and give more current "ls" output to show the available library code. git-svn-id: svn://svn.berlios.de/openocd/trunk@2820 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- doc/openocd.texi | 120 +++++++++++++++++++++++++++++++++-------------- 1 file changed, 84 insertions(+), 36 deletions(-) diff --git a/doc/openocd.texi b/doc/openocd.texi index 4d68ae52..1cf67362 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -82,7 +82,6 @@ Free Documentation License''. * GDB and OpenOCD:: Using GDB and OpenOCD * Tcl Scripting API:: Tcl Scripting API * Upgrading:: Deprecated/Removed Commands -* Target Library:: Target Library * FAQ:: Frequently Asked Questions * Tcl Crash Course:: Tcl Crash Course * License:: GNU Free Documentation License @@ -910,19 +909,69 @@ including developers and integrators of OpenOCD and any user who needs to get a new board working smoothly. It provides guidelines for creating those files. -You should find the following directories under @t{$(INSTALLDIR)/scripts}: +You should find the following directories under @t{$(INSTALLDIR)/scripts}, +with files including the ones listed here. +Use them as-is where you can; or as models for new files. @itemize @bullet @item @file{interface} ... think JTAG Dongle. Files that configure JTAG adapters go here. +@example +$ ls interface +arm-jtag-ew.cfg hitex_str9-comstick.cfg oocdlink.cfg +arm-usb-ocd.cfg icebear.cfg openocd-usb.cfg +at91rm9200.cfg jlink.cfg parport.cfg +axm0432.cfg jtagkey2.cfg parport_dlc5.cfg +calao-usb-a9260-c01.cfg jtagkey.cfg rlink.cfg +calao-usb-a9260-c02.cfg jtagkey-tiny.cfg sheevaplug.cfg +calao-usb-a9260.cfg luminary.cfg signalyzer.cfg +chameleon.cfg luminary-icdi.cfg stm32-stick.cfg +cortino.cfg luminary-lm3s811.cfg turtelizer2.cfg +dummy.cfg olimex-arm-usb-ocd.cfg usbprog.cfg +flyswatter.cfg olimex-jtag-tiny.cfg vsllink.cfg +$ +@end example @item @file{board} ... think Circuit Board, PWA, PCB, they go by many names. Board files -contain initialization items that are specific to a board. For +contain initialization items that are specific to a board. +They reuse target configuration files, since the same +microprocessor chips are used on many boards, +but support for external parts varies widely. For example, the SDRAM initialization sequence for the board, or the type of external flash and what address it uses. Any initialization sequence to enable that external flash or SDRAM should be found in the board file. Boards may also contain multiple targets: two CPUs; or -a CPU and an FPGA or CPLD. +a CPU and an FPGA. +@example +$ ls board +arm_evaluator7t.cfg keil_mcb1700.cfg +at91rm9200-dk.cfg keil_mcb2140.cfg +at91sam9g20-ek.cfg linksys_nslu2.cfg +atmel_at91sam7s-ek.cfg logicpd_imx27.cfg +atmel_at91sam9260-ek.cfg mini2440.cfg +atmel_sam3u_ek.cfg olimex_LPC2378STK.cfg +crossbow_tech_imote2.cfg olimex_lpc_h2148.cfg +csb337.cfg olimex_sam7_ex256.cfg +csb732.cfg olimex_sam9_l9260.cfg +digi_connectcore_wi-9c.cfg olimex_stm32_h103.cfg +dm355evm.cfg omap2420_h4.cfg +dm365evm.cfg osk5912.cfg +dm6446evm.cfg pic-p32mx.cfg +eir.cfg propox_mmnet1001.cfg +ek-lm3s1968.cfg pxa255_sst.cfg +ek-lm3s3748.cfg sheevaplug.cfg +ek-lm3s811.cfg stm3210e_eval.cfg +ek-lm3s9b9x.cfg stm32f10x_128k_eval.cfg +hammer.cfg str910-eval.cfg +hitex_lpc2929.cfg telo.cfg +hitex_stm32-performancestick.cfg ti_beagleboard.cfg +hitex_str9-comstick.cfg topas910.cfg +iar_str912_sk.cfg topasa900.cfg +imx27ads.cfg unknown_at91sam9260.cfg +imx27lnst.cfg x300t.cfg +imx31pdk.cfg zy1000.cfg +$ +@end example @item @file{target} ... think chip. The ``target'' directory represents the JTAG TAPs on a chip @@ -930,6 +979,37 @@ which OpenOCD should control, not a board. Two common types of targets are ARM chips and FPGA or CPLD chips. When a chip has multiple TAPs (maybe it has both ARM and DSP cores), the target config file defines all of them. +@example +$ ls target +aduc702x.cfg imx27.cfg pxa255.cfg +ar71xx.cfg imx31.cfg pxa270.cfg +at91eb40a.cfg imx35.cfg readme.txt +at91r40008.cfg is5114.cfg sam7se512.cfg +at91rm9200.cfg ixp42x.cfg sam7x256.cfg +at91sam3u1c.cfg lm3s1968.cfg samsung_s3c2410.cfg +at91sam3u1e.cfg lm3s3748.cfg samsung_s3c2440.cfg +at91sam3u2c.cfg lm3s6965.cfg samsung_s3c2450.cfg +at91sam3u2e.cfg lm3s811.cfg samsung_s3c4510.cfg +at91sam3u4c.cfg lm3s9b9x.cfg samsung_s3c6410.cfg +at91sam3u4e.cfg lpc1768.cfg sharp_lh79532.cfg +at91sam3uXX.cfg lpc2103.cfg smdk6410.cfg +at91sam7sx.cfg lpc2124.cfg smp8634.cfg +at91sam9260.cfg lpc2129.cfg stm32.cfg +c100.cfg lpc2148.cfg str710.cfg +c100config.tcl lpc2294.cfg str730.cfg +c100helper.tcl lpc2378.cfg str750.cfg +c100regs.tcl lpc2478.cfg str912.cfg +cs351x.cfg lpc2900.cfg telo.cfg +davinci.cfg mega128.cfg ti_dm355.cfg +dragonite.cfg netx500.cfg ti_dm365.cfg +epc9301.cfg omap2420.cfg ti_dm6446.cfg +feroceon.cfg omap3530.cfg tmpa900.cfg +icepick.cfg omap5912.cfg tmpa910.cfg +imx21.cfg pic32mx.cfg xba_revA3.cfg +$ +@end example +@item @emph{more} ... browse for other library files which may be useful. +For example, there are various generic and CPU-specific utilities. @end itemize The @file{openocd.cfg} user config @@ -6909,38 +6989,6 @@ foreach who @{A B C D E@} @} @end example -@node Target Library -@chapter Target Library -@cindex Target Library - -OpenOCD comes with a target configuration script library. These scripts can be -used as-is or serve as a starting point. - -The target library is published together with the OpenOCD executable and -the path to the target library is in the OpenOCD script search path. -Similarly there are example scripts for configuring the JTAG interface. - -The command line below uses the example parport configuration script -that ship with OpenOCD, then configures the str710.cfg target and -finally issues the init and reset commands. The communication speed -is set to 10kHz for reset and 8MHz for post reset. - -@example -openocd -f interface/parport.cfg -f target/str710.cfg \ - -c "init" -c "reset" -@end example - -To list the target scripts available: - -@example -$ ls /usr/local/lib/openocd/target - -arm7_fast.cfg lm3s6965.cfg pxa255.cfg stm32.cfg xba_revA3.cfg -at91eb40a.cfg lpc2148.cfg pxa255_sst.cfg str710.cfg zy1000.cfg -at91r40008.cfg lpc2294.cfg sam7s256.cfg str912.cfg -at91sam9260.cfg nslu2.cfg sam7x256.cfg wi-9c.cfg -@end example - @include fdl.texi @node OpenOCD Concept Index -- 2.39.5