From f8f9107d97b849afe69ca86e7abd8d1748ea7acd Mon Sep 17 00:00:00 2001 From: Teddy Reed Date: Thu, 9 Jun 2016 19:38:02 -0700 Subject: [PATCH] mkimage: fit: spl: Add an optional static offset for external data When building a FIT with external data (-E), U-Boot proper may require absolute positioning for executing the external firmware. To acheive this use the (-p) switch, which will replace the amended 'data-offset' with 'data-position' indicating the absolute position of external data. It is considered an error if the requested absolute position overlaps with the initial data required for the compact FIT. Signed-off-by: Teddy Reed --- doc/mkimage.1 | 6 ++++++ doc/uImage.FIT/source_file_format.txt | 3 +++ tools/fit_image.c | 19 ++++++++++++++++++- tools/imagetool.h | 1 + tools/mkimage.c | 13 +++++++++++-- 5 files changed, 39 insertions(+), 3 deletions(-) diff --git a/doc/mkimage.1 b/doc/mkimage.1 index 4b3a255255..ffa7d60156 100644 --- a/doc/mkimage.1 +++ b/doc/mkimage.1 @@ -151,6 +151,12 @@ the corresponding public key is written into this file for for run-time verification. Typically the file here is the device tree binary used by CONFIG_OF_CONTROL in U-Boot. +.TP +.BI "\-p [" "external position" "]" +Place external data at a static external position. See \-E. Instead of writing +a 'data-offset' property defining the offset from the end of the FIT, \-p will +use 'data-position' as the absolute position from the base of the FIT. + .TP .BI "\-r Specifies that keys used to sign the FIT are required. This means that they diff --git a/doc/uImage.FIT/source_file_format.txt b/doc/uImage.FIT/source_file_format.txt index 3f5418045e..91aa89a77e 100644 --- a/doc/uImage.FIT/source_file_format.txt +++ b/doc/uImage.FIT/source_file_format.txt @@ -282,6 +282,9 @@ In this case the 'data' property is omitted. Instead you can use: aligned to a 4-byte boundary. - data-size : size of the data in bytes +The 'data-offset' property can be substituted with 'data-position', which +defines an absolute position or address as the offset. This is helpful when +booting U-Boot proper before performing relocation. 9) Examples ----------- diff --git a/tools/fit_image.c b/tools/fit_image.c index 0551572b04..76a6de4579 100644 --- a/tools/fit_image.c +++ b/tools/fit_image.c @@ -416,7 +416,13 @@ static int fit_extract_data(struct image_tool_params *params, const char *fname) ret = -EPERM; goto err_munmap; } - fdt_setprop_u32(fdt, node, "data-offset", buf_ptr); + if (params->external_offset > 0) { + /* An external offset positions the data absolutely. */ + fdt_setprop_u32(fdt, node, "data-position", + params->external_offset + buf_ptr); + } else { + fdt_setprop_u32(fdt, node, "data-offset", buf_ptr); + } fdt_setprop_u32(fdt, node, "data-size", len); buf_ptr += (len + 3) & ~3; @@ -437,6 +443,17 @@ static int fit_extract_data(struct image_tool_params *params, const char *fname) ret = -EIO; goto err; } + + /* Check if an offset for the external data was set. */ + if (params->external_offset > 0) { + if (params->external_offset < new_size) { + debug("External offset %x overlaps FIT length %x", + params->external_offset, new_size); + ret = -EINVAL; + goto err; + } + new_size = params->external_offset; + } if (lseek(fd, new_size, SEEK_SET) < 0) { debug("%s: Failed to seek to end of file: %s\n", __func__, strerror(errno)); diff --git a/tools/imagetool.h b/tools/imagetool.h index a3ed0f43d6..1f2161cf61 100644 --- a/tools/imagetool.h +++ b/tools/imagetool.h @@ -74,6 +74,7 @@ struct image_tool_params { struct content_info *content_tail; bool external_data; /* Store data outside the FIT */ bool quiet; /* Don't output text in normal operation */ + unsigned int external_offset; /* Add padding to external data */ }; /* diff --git a/tools/mkimage.c b/tools/mkimage.c index aefe22f19b..ff3024a8f1 100644 --- a/tools/mkimage.c +++ b/tools/mkimage.c @@ -93,11 +93,13 @@ static void usage(const char *msg) " -f => input filename for FIT source\n"); #ifdef CONFIG_FIT_SIGNATURE fprintf(stderr, - "Signing / verified boot options: [-k keydir] [-K dtb] [ -c ] [-r]\n" + "Signing / verified boot options: [-E] [-k keydir] [-K dtb] [ -c ] [-p addr] [-r]\n" + " -E => place data outside of the FIT structure\n" " -k => set directory containing private keys\n" " -K => write public keys to this .dtb file\n" " -c => add comment in signature node\n" " -F => re-sign existing FIT image\n" + " -p => place external data at a static position\n" " -r => mark keys used as 'required' in dtb\n"); #else fprintf(stderr, @@ -136,7 +138,7 @@ static void process_args(int argc, char **argv) int opt; while ((opt = getopt(argc, argv, - "a:A:b:cC:d:D:e:Ef:Fk:K:ln:O:rR:qsT:vVx")) != -1) { + "a:A:b:cC:d:D:e:Ef:Fk:K:ln:p:O:rR:qsT:vVx")) != -1) { switch (opt) { case 'a': params.addr = strtoull(optarg, &ptr, 16); @@ -216,6 +218,13 @@ static void process_args(int argc, char **argv) if (params.os < 0) usage("Invalid operating system"); break; + case 'p': + params.external_offset = strtoull(optarg, &ptr, 16); + if (*ptr) { + fprintf(stderr, "%s: invalid offset size %s\n", + params.cmdname, optarg); + exit(EXIT_FAILURE); + } case 'q': params.quiet = 1; break; -- 2.39.5