From fa9aee3aa379d15d4fbb225bc3d6b48521678182 Mon Sep 17 00:00:00 2001 From: =?utf8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= Date: Mon, 24 Apr 2017 19:03:33 +0200 Subject: [PATCH] MIPS: tl-wdr4300: remove debug_uart_init call MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit In order to add a generic MIPS debug_uart_init call right before the call to board_early_init_f, we need to remove all calls to debug_uart_init from every MIPS boards. WDR4300 doesn't provide a board_debug_uart_init and configures pinmux in board_early_init_f instead. Since I have no idead of what's the needed uart pinmux config, I copied the whole pinmux config to a new function that is called from board_early_init_f if CONFIG_DEBUG_UART_BOARD_INIT is not enabled. Signed-off-by: Álvaro Fernández Rojas --- board/tplink/wdr4300/wdr4300.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/board/tplink/wdr4300/wdr4300.c b/board/tplink/wdr4300/wdr4300.c index 6e070fd558..0f59648b1f 100644 --- a/board/tplink/wdr4300/wdr4300.c +++ b/board/tplink/wdr4300/wdr4300.c @@ -34,8 +34,7 @@ static void wdr4300_usb_start(void) static inline void wdr4300_usb_start(void) {} #endif -#ifdef CONFIG_BOARD_EARLY_INIT_F -int board_early_init_f(void) +void wdr4300_pinmux_config(void) { void __iomem *regs; @@ -56,9 +55,20 @@ int board_early_init_f(void) writel(0x00000000, regs + AR934X_GPIO_REG_OUT_FUNC3); writel(0x0000004d, regs + AR934X_GPIO_REG_OUT_FUNC4); writel(0x00000000, regs + AR934X_GPIO_REG_OUT_FUNC5); +} + +#ifdef CONFIG_DEBUG_UART_BOARD_INIT +void board_debug_uart_init(void) +{ + wdr4300_pinmux_config(); +} +#endif -#ifdef CONFIG_DEBUG_UART - debug_uart_init(); +#ifdef CONFIG_BOARD_EARLY_INIT_F +int board_early_init_f(void) +{ +#ifndef CONFIG_DEBUG_UART_BOARD_INIT + wdr4300_pinmux_config(); #endif #ifndef CONFIG_SKIP_LOWLEVEL_INIT -- 2.39.5