From fc3e2165efda62670d447617a7d44c5666178ea4 Mon Sep 17 00:00:00 2001 From: wdenk Date: Wed, 8 Oct 2003 22:33:00 +0000 Subject: [PATCH] * Patch by Sangmoon Kim, 23 Sep 2003: fix pll_pci_to_mem_multiplier table for MPC8245 MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit * Patch by Anders Larsen, 22 Sep 2003: enable timed autoboot on PXA * Patch by David Müller, 22 Sep 2003: - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver returns correct libgcc file path - "latency" reduction of busy-loop waiting to improve "U-Boot" boot time on s3c24x0 systems * Patch by Jon Diekema, 19 Sep 2003: - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet link state to the fault LED. - In NetLoop, make the Fault LED reflect the link status. The link status gets updated on entry, and on timeouts. --- CHANGELOG | 19 ++ Makefile | 2 +- README | 8 + common/miiphyutil.c | 23 ++ cpu/mpc824x/speed.c | 4 +- cpu/pxa/interrupts.c | 20 ++ drivers/s3c24x0_i2c.c | 530 +++++++++++++++++++++--------------------- include/miiphy.h | 3 + net/net.c | 28 +++ 9 files changed, 368 insertions(+), 269 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index 9244e64e56..54d6e88626 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,25 @@ Changes for U-Boot 1.0.0: ====================================================================== +* Patch by Sangmoon Kim, 23 Sep 2003: + fix pll_pci_to_mem_multiplier table for MPC8245 + +* Patch by Anders Larsen, 22 Sep 2003: + enable timed autoboot on PXA + +* Patch by David Müller, 22 Sep 2003: + + - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver + returns correct libgcc file path + - "latency" reduction of busy-loop waiting to improve "U-Boot" boot + time on s3c24x0 systems + +* Patch by Jon Diekema, 19 Sep 2003: + - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet + link state to the fault LED. + - In NetLoop, make the Fault LED reflect the link status. The link + status gets updated on entry, and on timeouts. + * Patch by Anders Larsen, 18 Sep 2003: allow mkimage to build and run on Cygwin-hosted systems diff --git a/Makefile b/Makefile index 80dc424d72..6d006bffaf 100644 --- a/Makefile +++ b/Makefile @@ -118,7 +118,7 @@ LIBS += post/libpost.a post/cpu/libcpu.a LIBS += common/libcommon.a LIBS += lib_generic/libgeneric.a # Add GCC lib -PLATFORM_LIBS += -L $(shell dirname `$(CC) -print-libgcc-file-name`) -lgcc +PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc ######################################################################### ######################################################################### diff --git a/README b/README index 1471cb5dee..9049f3a072 100644 --- a/README +++ b/README @@ -1749,6 +1749,14 @@ Note: once the monitor has been relocated, then it will complain if the default environment is used; a new CRC is computed as soon as you use the "saveenv" command to store a valid environment. +- CFG_FAULT_ECHO_LINK_DOWN: + Echo the inverted Ethernet link state to the fault LED. + + Note: If this option is active, then CFG_FAULT_MII_ADDR + also needs to be defined. + +- CFG_FAULT_MII_ADDR: + MII address of the PHY to check for the Ethernet link state. Low Level (hardware related) configuration options: --------------------------------------------------- diff --git a/common/miiphyutil.c b/common/miiphyutil.c index 6b2425f660..75c2df5cae 100644 --- a/common/miiphyutil.c +++ b/common/miiphyutil.c @@ -169,4 +169,27 @@ int miiphy_duplex (unsigned char addr) } } +#ifdef CFG_FAULT_ECHO_LINK_DOWN +/***************************************************************************** + * + * Determine link status + */ +int miiphy_link (unsigned char addr) +{ + unsigned short reg; + + if (miiphy_read (addr, PHY_BMSR, ®)) { + printf ("PHY_BMSR read failed, assuming no link\n"); + return (0); + } + + /* Determine if a link is active */ + if ((reg & PHY_BMSR_LS) != 0) { + return (1); + } else { + return (0); + } +} +#endif + #endif /* CONFIG_MII || (CONFIG_COMMANDS & CFG_CMD_MII) */ diff --git a/cpu/mpc824x/speed.c b/cpu/mpc824x/speed.c index bd3156d255..a37a087af1 100644 --- a/cpu/mpc824x/speed.c +++ b/cpu/mpc824x/speed.c @@ -61,8 +61,8 @@ short pll_pci_to_mem_multiplier[] = { 25, 0, 10, 0, 15, 15, 0, 0, #elif defined(CONFIG_MPC8245) 30, 30, 10, 10, 20, 10, 10, 10, - 10, 20, 20, 15, 20, 15, 20, 0, - 30, 0, 15, 40, 20, 25, 20, 40, + 10, 20, 20, 15, 20, 15, 20, 30, + 30, 40, 15, 40, 20, 25, 20, 40, 25, 20, 10, 20, 15, 15, 15, 0, #else #error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) diff --git a/cpu/pxa/interrupts.c b/cpu/pxa/interrupts.c index cf529f4221..b161b74681 100644 --- a/cpu/pxa/interrupts.c +++ b/cpu/pxa/interrupts.c @@ -202,3 +202,23 @@ void udelay_masked (unsigned long usec) while (tmo >= get_timer_masked ()) /*NOP*/; } + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On ARM it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk (void) +{ + ulong tbclk; + tbclk = CFG_HZ; + return tbclk; +} diff --git a/drivers/s3c24x0_i2c.c b/drivers/s3c24x0_i2c.c index 2c27cb5458..ef56cd1c31 100644 --- a/drivers/s3c24x0_i2c.c +++ b/drivers/s3c24x0_i2c.c @@ -91,359 +91,357 @@ static void SetI2CSCL(int x) } -static int WaitForXfer(void) +static int WaitForXfer (void) { - S3C24X0_I2C * const i2c = S3C24X0_GetBase_I2C(); - int i, status; + S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C (); + int i, status; - i = I2C_TIMEOUT * 1000; - status = i2c->IICCON; - while ((i > 0) && !(status & I2CCON_IRPND)) { - udelay(1000); + i = I2C_TIMEOUT * 10000; status = i2c->IICCON; - i--; - } + while ((i > 0) && !(status & I2CCON_IRPND)) { + udelay (100); + status = i2c->IICCON; + i--; + } - return(status & I2CCON_IRPND) ? I2C_OK : I2C_NOK_TOUT; + return (status & I2CCON_IRPND) ? I2C_OK : I2C_NOK_TOUT; } -static int IsACK(void) +static int IsACK (void) { - S3C24X0_I2C * const i2c = S3C24X0_GetBase_I2C(); + S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C (); - return(!(i2c->IICSTAT & I2CSTAT_NACK)); + return (!(i2c->IICSTAT & I2CSTAT_NACK)); } -static void ReadWriteByte(void) +static void ReadWriteByte (void) { - S3C24X0_I2C * const i2c = S3C24X0_GetBase_I2C(); + S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C (); - i2c->IICCON &= ~I2CCON_IRPND; + i2c->IICCON &= ~I2CCON_IRPND; } void i2c_init (int speed, int slaveadd) { - S3C24X0_I2C * const i2c = S3C24X0_GetBase_I2C(); - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); - ulong freq, pres = 16, div; - int i, status; + S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C (); + S3C24X0_GPIO *const gpio = S3C24X0_GetBase_GPIO (); + ulong freq, pres = 16, div; + int i, status; - /* wait for some time to give previous transfer a chance to finish */ + /* wait for some time to give previous transfer a chance to finish */ - i = I2C_TIMEOUT * 1000; - status = i2c->IICSTAT; - while ((i > 0) && (status & I2CSTAT_BSY)) { - udelay(1000); + i = I2C_TIMEOUT * 1000; status = i2c->IICSTAT; - i--; - } + while ((i > 0) && (status & I2CSTAT_BSY)) { + udelay (1000); + status = i2c->IICSTAT; + i--; + } - if ((status & I2CSTAT_BSY) || GetI2CSDA() == 0) { + if ((status & I2CSTAT_BSY) || GetI2CSDA () == 0) { #ifdef CONFIG_S3C2410 - ulong old_gpecon = gpio->GPECON; + ulong old_gpecon = gpio->GPECON; #endif #ifdef CONFIG_S3C2400 - ulong old_gpecon = gpio->PGCON; + ulong old_gpecon = gpio->PGCON; #endif - /* bus still busy probably by (most) previously interrupted transfer */ + /* bus still busy probably by (most) previously interrupted transfer */ #ifdef CONFIG_S3C2410 - /* set I2CSDA and I2CSCL (GPE15, GPE14) to GPIO */ - gpio->GPECON = (gpio->GPECON & ~0xF0000000) | 0x10000000; + /* set I2CSDA and I2CSCL (GPE15, GPE14) to GPIO */ + gpio->GPECON = (gpio->GPECON & ~0xF0000000) | 0x10000000; #endif #ifdef CONFIG_S3C2400 - /* set I2CSDA and I2CSCL (PG5, PG6) to GPIO */ - gpio->PGCON = (gpio->PGCON & ~0x00003c00) | 0x00000c00; + /* set I2CSDA and I2CSCL (PG5, PG6) to GPIO */ + gpio->PGCON = (gpio->PGCON & ~0x00003c00) | 0x00000c00; #endif - /* toggle I2CSCL until bus idle */ - SetI2CSCL(0); udelay(1000); - i = 10; - while ((i > 0) && (GetI2CSDA() != 1)) { - SetI2CSCL(1); udelay(1000); - SetI2CSCL(0); udelay(1000); - i--; - } - SetI2CSCL(1); udelay(1000); + /* toggle I2CSCL until bus idle */ + SetI2CSCL (0); + udelay (1000); + i = 10; + while ((i > 0) && (GetI2CSDA () != 1)) { + SetI2CSCL (1); + udelay (1000); + SetI2CSCL (0); + udelay (1000); + i--; + } + SetI2CSCL (1); + udelay (1000); - /* restore pin functions */ + /* restore pin functions */ #ifdef CONFIG_S3C2410 - gpio->GPECON = old_gpecon; + gpio->GPECON = old_gpecon; #endif #ifdef CONFIG_S3C2400 - gpio->PGCON = old_gpecon; + gpio->PGCON = old_gpecon; #endif - } + } - /* calculate prescaler and divisor values */ - freq = get_PCLK(); - if ((freq / pres / (16+1)) > speed) - /* set prescaler to 512 */ - pres = 512; + /* calculate prescaler and divisor values */ + freq = get_PCLK (); + if ((freq / pres / (16 + 1)) > speed) + /* set prescaler to 512 */ + pres = 512; - div = 0; - while ((freq / pres / (div+1)) > speed) - div++; + div = 0; + while ((freq / pres / (div + 1)) > speed) + div++; - /* set prescaler, divisor according to freq, also set - ACKGEN, IRQ */ - i2c->IICCON = (div & 0x0F) | 0xA0 | ((pres == 512) ? 0x40 : 0); + /* set prescaler, divisor according to freq, also set + * ACKGEN, IRQ */ + i2c->IICCON = (div & 0x0F) | 0xA0 | ((pres == 512) ? 0x40 : 0); - /* init to SLAVE REVEIVE and set slaveaddr */ - i2c->IICSTAT = 0; - i2c->IICADD = slaveadd; - /* program Master Transmit (and implicit STOP) */ - i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA; + /* init to SLAVE REVEIVE and set slaveaddr */ + i2c->IICSTAT = 0; + i2c->IICADD = slaveadd; + /* program Master Transmit (and implicit STOP) */ + i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA; } /* - cmd_type is 0 for write 1 for read. - - addr_len can take any value from 0-255, it is only limited - by the char, we could make it larger if needed. If it is - 0 we skip the address write cycle. - -*/ + * cmd_type is 0 for write, 1 for read. + * + * addr_len can take any value from 0-255, it is only limited + * by the char, we could make it larger if needed. If it is + * 0 we skip the address write cycle. + */ static -int i2c_transfer(unsigned char cmd_type, - unsigned char chip, - unsigned char addr[], - unsigned char addr_len, - unsigned char data[], - unsigned short data_len) +int i2c_transfer (unsigned char cmd_type, + unsigned char chip, + unsigned char addr[], + unsigned char addr_len, + unsigned char data[], unsigned short data_len) { - S3C24X0_I2C * const i2c = S3C24X0_GetBase_I2C(); - int i, status, result; - - if (data == 0 || data_len == 0) { - /*Don't support data transfer of no length or to address 0*/ - printf( "i2c_transfer: bad call\n" ); - return I2C_NOK; - } - - /*CheckDelay(); */ - - /* Check I2C bus idle */ - i = I2C_TIMEOUT * 1000; - status = i2c->IICSTAT; - while ((i > 0) && (status & I2CSTAT_BSY)) { - udelay(1000); - status = i2c->IICSTAT; - i--; - } + S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C (); + int i, status, result; + if (data == 0 || data_len == 0) { + /*Don't support data transfer of no length or to address 0 */ + printf ("i2c_transfer: bad call\n"); + return I2C_NOK; + } - if (status & I2CSTAT_BSY) { - result = I2C_NOK_TOUT; - return(result); - } + /* Check I2C bus idle */ + i = I2C_TIMEOUT * 1000; + status = i2c->IICSTAT; + while ((i > 0) && (status & I2CSTAT_BSY)) { + udelay (1000); + status = i2c->IICSTAT; + i--; + } - i2c->IICCON |= 0x80; + if (status & I2CSTAT_BSY) + return I2C_NOK_TOUT; - result = I2C_OK; + i2c->IICCON |= 0x80; + result = I2C_OK; - switch (cmd_type) { + switch (cmd_type) { case I2C_WRITE: - if (addr && addr_len) { - i2c->IICDS = chip; - /* send START */ - i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP; - i = 0; - while ((i < addr_len) && (result == I2C_OK)) { - result = WaitForXfer(); - i2c->IICDS = addr[i]; - ReadWriteByte(); - i++; - } - i = 0; - while ((i < data_len) && (result == I2C_OK)) { - result = WaitForXfer(); - i2c->IICDS = data[i]; - ReadWriteByte(); - i++; - } - } else { - i2c->IICDS = chip; - /* send START */ - i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP; - i = 0; - while ((i < data_len) && (result = I2C_OK)) { - result = WaitForXfer(); - i2c->IICDS = data[i]; - ReadWriteByte(); - i++; + if (addr && addr_len) { + i2c->IICDS = chip; + /* send START */ + i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP; + i = 0; + while ((i < addr_len) && (result == I2C_OK)) { + result = WaitForXfer (); + i2c->IICDS = addr[i]; + ReadWriteByte (); + i++; + } + i = 0; + while ((i < data_len) && (result == I2C_OK)) { + result = WaitForXfer (); + i2c->IICDS = data[i]; + ReadWriteByte (); + i++; + } + } else { + i2c->IICDS = chip; + /* send START */ + i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP; + i = 0; + while ((i < data_len) && (result = I2C_OK)) { + result = WaitForXfer (); + i2c->IICDS = data[i]; + ReadWriteByte (); + i++; + } } - } - if (result == I2C_OK) - result = WaitForXfer(); + if (result == I2C_OK) + result = WaitForXfer (); - /* send STOP */ - i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA; - ReadWriteByte(); - break; + /* send STOP */ + i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA; + ReadWriteByte (); + break; case I2C_READ: - if (addr && addr_len) { - i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA; - i2c->IICDS = chip; - /* send START */ - i2c->IICSTAT |= I2C_START_STOP; - result = WaitForXfer(); - if (IsACK()) { - i = 0; - while ((i < addr_len) && (result == I2C_OK)) { - i2c->IICDS = addr[i]; - ReadWriteByte(); - result = WaitForXfer(); - i++; - } - - i2c->IICDS = chip; - /* resend START */ - i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA | I2C_START_STOP; - ReadWriteByte(); - result = WaitForXfer(); - i = 0; - while ((i < data_len) && (result == I2C_OK)) { - /* disable ACK for final READ */ - if (i == data_len - 1) - i2c->IICCON &= ~0x80; - ReadWriteByte(); - result = WaitForXfer(); - data[i] = i2c->IICDS; - i++; - } - } else { - result = I2C_NACK; - } + if (addr && addr_len) { + i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA; + i2c->IICDS = chip; + /* send START */ + i2c->IICSTAT |= I2C_START_STOP; + result = WaitForXfer (); + if (IsACK ()) { + i = 0; + while ((i < addr_len) && (result == I2C_OK)) { + i2c->IICDS = addr[i]; + ReadWriteByte (); + result = WaitForXfer (); + i++; + } + + i2c->IICDS = chip; + /* resend START */ + i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA | + I2C_START_STOP; + ReadWriteByte (); + result = WaitForXfer (); + i = 0; + while ((i < data_len) && (result == I2C_OK)) { + /* disable ACK for final READ */ + if (i == data_len - 1) + i2c->IICCON &= ~0x80; + ReadWriteByte (); + result = WaitForXfer (); + data[i] = i2c->IICDS; + i++; + } + } else { + result = I2C_NACK; + } - } else { - i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA; - i2c->IICDS = chip; - /* send START */ - i2c->IICSTAT |= I2C_START_STOP; - result = WaitForXfer(); - - if (IsACK()) { - i = 0; - while ((i < data_len) && (result == I2C_OK)) { - /* disable ACK for final READ */ - if (i == data_len - 1) - i2c->IICCON &= ~0x80; - ReadWriteByte(); - result = WaitForXfer(); - data[i] = i2c->IICDS; - i++; - } } else { - result = I2C_NACK; + i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA; + i2c->IICDS = chip; + /* send START */ + i2c->IICSTAT |= I2C_START_STOP; + result = WaitForXfer (); + + if (IsACK ()) { + i = 0; + while ((i < data_len) && (result == I2C_OK)) { + /* disable ACK for final READ */ + if (i == data_len - 1) + i2c->IICCON &= ~0x80; + ReadWriteByte (); + result = WaitForXfer (); + data[i] = i2c->IICDS; + i++; + } + } else { + result = I2C_NACK; + } } - } - /* send STOP */ - i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA; - ReadWriteByte(); - break; + /* send STOP */ + i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA; + ReadWriteByte (); + break; default: - printf( "i2c_transfer: bad call\n" ); - result = I2C_NOK; - break; - } + printf ("i2c_transfer: bad call\n"); + result = I2C_NOK; + break; + } - return (result); + return (result); } int i2c_probe (uchar chip) { - uchar buf[1]; + uchar buf[1]; - buf[0] = 0; + buf[0] = 0; - /* - * What is needed is to send the chip address and verify that the - * address was ed (i.e. there was a chip at that address which - * drove the data line low). - */ - return(i2c_transfer (I2C_READ, chip << 1, 0, 0, buf, 1) != I2C_OK); + /* + * What is needed is to send the chip address and verify that the + * address was ed (i.e. there was a chip at that address which + * drove the data line low). + */ + return (i2c_transfer (I2C_READ, chip << 1, 0, 0, buf, 1) != I2C_OK); } int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len) { - uchar xaddr[4]; - int ret; + uchar xaddr[4]; + int ret; - if ( alen > 4 ) { - printf ("I2C read: addr len %d not supported\n", alen); - return 1; - } - - if ( alen > 0 ) { - xaddr[0] = (addr >> 24) & 0xFF; - xaddr[1] = (addr >> 16) & 0xFF; - xaddr[2] = (addr >> 8) & 0xFF; - xaddr[3] = addr & 0xFF; - } + if (alen > 4) { + printf ("I2C read: addr len %d not supported\n", alen); + return 1; + } + if (alen > 0) { + xaddr[0] = (addr >> 24) & 0xFF; + xaddr[1] = (addr >> 16) & 0xFF; + xaddr[2] = (addr >> 8) & 0xFF; + xaddr[3] = addr & 0xFF; + } #ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW - /* - * EEPROM chips that implement "address overflow" are ones - * like Catalyst 24WC04/08/16 which has 9/10/11 bits of - * address and the extra bits end up in the "chip address" - * bit slots. This makes a 24WC08 (1Kbyte) chip look like - * four 256 byte chips. - * - * Note that we consider the length of the address field to - * still be one byte because the extra address bits are - * hidden in the chip address. - */ - if( alen > 0 ) - chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW); + /* + * EEPROM chips that implement "address overflow" are ones + * like Catalyst 24WC04/08/16 which has 9/10/11 bits of + * address and the extra bits end up in the "chip address" + * bit slots. This makes a 24WC08 (1Kbyte) chip look like + * four 256 byte chips. + * + * Note that we consider the length of the address field to + * still be one byte because the extra address bits are + * hidden in the chip address. + */ + if (alen > 0) + chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW); #endif - if( (ret = i2c_transfer(I2C_READ, chip<<1, &xaddr[4-alen], alen, buffer, len )) != 0) { - printf( "I2c read: failed %d\n", ret); - return 1; - } - return 0; + if ((ret = + i2c_transfer (I2C_READ, chip << 1, &xaddr[4 - alen], alen, + buffer, len)) != 0) { + printf ("I2c read: failed %d\n", ret); + return 1; + } + return 0; } int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len) { - uchar xaddr[4]; + uchar xaddr[4]; - if ( alen > 4 ) { - printf ("I2C write: addr len %d not supported\n", alen); - return 1; - } - - if ( alen > 0 ) { - xaddr[0] = (addr >> 24) & 0xFF; - xaddr[1] = (addr >> 16) & 0xFF; - xaddr[2] = (addr >> 8) & 0xFF; - xaddr[3] = addr & 0xFF; - } + if (alen > 4) { + printf ("I2C write: addr len %d not supported\n", alen); + return 1; + } + if (alen > 0) { + xaddr[0] = (addr >> 24) & 0xFF; + xaddr[1] = (addr >> 16) & 0xFF; + xaddr[2] = (addr >> 8) & 0xFF; + xaddr[3] = addr & 0xFF; + } #ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW - /* - * EEPROM chips that implement "address overflow" are ones - * like Catalyst 24WC04/08/16 which has 9/10/11 bits of - * address and the extra bits end up in the "chip address" - * bit slots. This makes a 24WC08 (1Kbyte) chip look like - * four 256 byte chips. - * - * Note that we consider the length of the address field to - * still be one byte because the extra address bits are - * hidden in the chip address. - */ - if( alen > 0 ) - chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW); + /* + * EEPROM chips that implement "address overflow" are ones + * like Catalyst 24WC04/08/16 which has 9/10/11 bits of + * address and the extra bits end up in the "chip address" + * bit slots. This makes a 24WC08 (1Kbyte) chip look like + * four 256 byte chips. + * + * Note that we consider the length of the address field to + * still be one byte because the extra address bits are + * hidden in the chip address. + */ + if (alen > 0) + chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW); #endif - return (i2c_transfer(I2C_WRITE, chip<<1, &xaddr[4-alen], alen, buffer, len ) != 0); + return (i2c_transfer + (I2C_WRITE, chip << 1, &xaddr[4 - alen], alen, buffer, + len) != 0); } - #endif /* CONFIG_HARD_I2C */ #endif /* CONFIG_DRIVER_S3C24X0_I2C */ diff --git a/include/miiphy.h b/include/miiphy.h index 050db9ab57..672baf9f40 100644 --- a/include/miiphy.h +++ b/include/miiphy.h @@ -46,6 +46,9 @@ int miiphy_info(unsigned char addr, unsigned int *oui, unsigned char *model, int miiphy_reset(unsigned char addr); int miiphy_speed(unsigned char addr); int miiphy_duplex(unsigned char addr); +#ifdef CFG_FAULT_ECHO_LINK_DOWN +int miiphy_link(unsigned char addr); +#endif /* phy seed setup */ diff --git a/net/net.c b/net/net.c index a139742292..c34f41dee0 100644 --- a/net/net.c +++ b/net/net.c @@ -65,6 +65,10 @@ #include "bootp.h" #include "tftp.h" #include "rarp.h" +#ifdef CONFIG_STATUS_LED +#include +#include +#endif #if (CONFIG_COMMANDS & CFG_CMD_NET) @@ -361,6 +365,18 @@ restart: break; } +#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) +#if defined(CFG_FAULT_ECHO_LINK_DOWN) && defined(CONFIG_STATUS_LED) && defined(STATUS_LED_RED) + /* + * Echo the inverted link state to the fault LED. + */ + if(miiphy_link(CFG_FAULT_MII_ADDR)) { + status_led_set (STATUS_LED_RED, STATUS_LED_OFF); + } else { + status_led_set (STATUS_LED_RED, STATUS_LED_ON); + } +#endif /* CFG_FAULT_ECHO_LINK_DOWN, ... */ +#endif /* CONFIG_MII, ... */ /* * Main packet reception loop. Loop receiving packets until @@ -398,6 +414,18 @@ restart: if (timeHandler && ((get_timer(0) - timeStart) > timeDelta)) { thand_f *x; +#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) +#if defined(CFG_FAULT_ECHO_LINK_DOWN) && defined(CONFIG_STATUS_LED) && defined(STATUS_LED_RED) + /* + * Echo the inverted link state to the fault LED. + */ + if(miiphy_link(CFG_FAULT_MII_ADDR)) { + status_led_set (STATUS_LED_RED, STATUS_LED_OFF); + } else { + status_led_set (STATUS_LED_RED, STATUS_LED_ON); + } +#endif /* CFG_FAULT_ECHO_LINK_DOWN, ... */ +#endif /* CONFIG_MII, ... */ x = timeHandler; timeHandler = (thand_f *)0; (*x)(); -- 2.39.5