From fd0a1ba52ec65e82caf163d0074e768c3abc57ae Mon Sep 17 00:00:00 2001 From: Philipp Tomsich Date: Tue, 19 Sep 2017 15:49:14 +0200 Subject: [PATCH] rockchip: pinctrl: rk3368: add pinctrl for SDMMC0 Apparently, our earlier assumption that the BROM will always set up the iomux for SDcard communication does not always hold true: when booting U-Boot from the on-module (on the RK3368-uQ7) eMMC, the SDcard pins are not set up and need to be configured by the pinctrl driver to allow SD card access. This change implements support for setting up the SDMMC pins in pinctrl for the RK3368. Reported-by: Klaus Goger Signed-off-by: Philipp Tomsich Reviewed-by: Simon Glass --- drivers/pinctrl/rockchip/pinctrl_rk3368.c | 39 ++++++++++++++++++++--- 1 file changed, 34 insertions(+), 5 deletions(-) diff --git a/drivers/pinctrl/rockchip/pinctrl_rk3368.c b/drivers/pinctrl/rockchip/pinctrl_rk3368.c index b1f5704164..25249e377a 100644 --- a/drivers/pinctrl/rockchip/pinctrl_rk3368.c +++ b/drivers/pinctrl/rockchip/pinctrl_rk3368.c @@ -208,6 +208,29 @@ enum { GPIO2A0_FLASH_CSN0 = (1 << GPIO2A0_SHIFT), }; +/*GRF_GPIO2B_IOMUX*/ +enum { + GPIO2B3_SHIFT = 6, + GPIO2B3_MASK = GENMASK(GPIO2B3_SHIFT + 1, GPIO2B3_SHIFT), + GPIO2B3_GPIO = 0, + GPIO2B3_SDMMC0_DTECTN = (1 << GPIO2B3_SHIFT), + + GPIO2B2_SHIFT = 4, + GPIO2B2_MASK = GENMASK(GPIO2B2_SHIFT + 1, GPIO2B2_SHIFT), + GPIO2B2_GPIO = 0, + GPIO2B2_SDMMC0_CMD = (1 << GPIO2B2_SHIFT), + + GPIO2B1_SHIFT = 2, + GPIO2B1_MASK = GENMASK(GPIO2B1_SHIFT + 1, GPIO2B1_SHIFT), + GPIO2B1_GPIO = 0, + GPIO2B1_SDMMC0_CLKOUT = (1 << GPIO2B1_SHIFT), + + GPIO2B0_SHIFT = 0, + GPIO2B0_MASK = GENMASK(GPIO2B0_SHIFT + 1, GPIO2B0_SHIFT), + GPIO2B0_GPIO = 0, + GPIO2B0_SDMMC0_D3 = (1 << GPIO2B0_SHIFT), +}; + /*GRF_GPIO2D_IOMUX*/ enum { GPIO2D7_SHIFT = 14, @@ -580,11 +603,17 @@ static void pinctrl_rk3368_sdmmc_config(struct rk3368_grf *grf, int mmc_id) GPIO2A4_EMMC_CLKOUT); break; case PERIPH_ID_SDCARD: - /* - * We assume that the BROM has already set this up - * correctly for us and that there's nothing to do - * here. - */ + debug("mmc id = %d setting registers!\n", mmc_id); + rk_clrsetreg(&grf->gpio2a_iomux, + GPIO2A5_MASK | GPIO2A7_MASK | + GPIO2A7_MASK, + GPIO2A5_SDMMC0_D0 | GPIO2A6_SDMMC0_D1 | + GPIO2A7_SDMMC0_D2); + rk_clrsetreg(&grf->gpio2b_iomux, + GPIO2B0_MASK | GPIO2B1_MASK | + GPIO2B2_MASK | GPIO2B3_MASK, + GPIO2B0_SDMMC0_D3 | GPIO2B1_SDMMC0_CLKOUT | + GPIO2B2_SDMMC0_CMD | GPIO2B3_SDMMC0_DTECTN); break; default: debug("mmc id = %d iomux error!\n", mmc_id); -- 2.39.5