From 93a13315deb03f660b26b9026ded8a50ba0c753b Mon Sep 17 00:00:00 2001 From: Bill Kendrick Date: Wed, 16 Jan 2019 23:29:41 -0800 Subject: [PATCH] Comment adjustments; removed surperfluous keycodes Cleaned up comments in Atari 8-bit headers. Internal keycodes (POKEY's KBCODE) were already #defined in atari.h, so didn't need a whole new set in _pokey.h. --- include/_antic.h | 100 +++++++++++++++++++------- include/_gtia.h | 67 ++++++++++++------ include/_pia.h | 60 +++++++++------- include/_pokey.h | 179 ++++++++++++----------------------------------- include/atari.h | 96 ++++++++++++++++++++----- 5 files changed, 282 insertions(+), 220 deletions(-) diff --git a/include/_antic.h b/include/_antic.h index 8520c5f19..f9d880b0a 100644 --- a/include/_antic.h +++ b/include/_antic.h @@ -18,7 +18,7 @@ /* */ /* (C) 2000 Freddy Offenga */ /* 24-Jan-2011: Christian Krueger: Added defines for Antic instruction set */ -/* 2019-01-14: Bill Kendrick : More defines for registers */ +/* 2019-01-16: Bill Kendrick : More defines for registers */ /* */ /* */ /* This software is provided 'as-is', without any expressed or implied */ @@ -44,7 +44,10 @@ #ifndef __ANTIC_H #define __ANTIC_H -/* Define a structure with the ANTIC coprocessor's register offsets */ +/*****************************************************************************/ +/* Define a structure with the ANTIC coprocessor's register offsets */ +/*****************************************************************************/ + struct __antic { unsigned char dmactl; /* (W) direct memory access control */ unsigned char chactl; /* (W) character mode control */ @@ -68,7 +71,10 @@ struct __antic { }; -/* DMACTL register options */ +/*****************************************************************************/ +/* DMACTL register options */ +/*****************************************************************************/ + /* Initialized to 0x22: DMA fetch, normal playfield, no PMG DMA, double-line PMGs */ /* Playfield modes: */ @@ -96,7 +102,10 @@ struct __antic { #define DMACTL_DMA_FETCH 0x20 -/* CHACTL register options */ +/*****************************************************************************/ +/* CHACTL register options */ +/*****************************************************************************/ + /* Initialized to 2 (CHACTL_CHAR_NORMAL | CHACTL_INV_PRESENT) */ /* Inverted (upside-down) characters */ @@ -109,27 +118,29 @@ struct __antic { #define CHACTL_INV_PRESENT 0x02 /* chars with high-bit are reverse-video */ -/* Register bits for NMIEN (enabling interrupts) -** and NMIST (determining the cause for the NMI interrupt) -*/ +/*****************************************************************************/ +/* Values for NMIEN (enabling interrupts) & NMIST (cause for the interrupt) */ +/*****************************************************************************/ -#define NMIEN_DLI 0x80 /* Display List Interrupts ** Called on a modeline when "DL_DLI" bit is set the ANTIC instruction, ** and jumps through VDSLST vector. */ +#define NMIEN_DLI 0x80 -#define NMIEN_VBI 0x40 /* Vertical Blank Interrupt ** Called during every vertical blank; see SYSVBV, VVBLKI, CRITIC, and VVBLKD, ** as well as the SETVBV routine. */ +#define NMIEN_VBI 0x40 -#define NMIEN_RESET 0x20 /* [Reset] key pressed */ +#define NMIEN_RESET 0x20 -/* ANTIC instruction set */ +/*****************************************************************************/ +/* ANTIC instruction set */ +/*****************************************************************************/ /* Absolute instructions (non mode lines) */ #define DL_JMP ((unsigned char) 1) @@ -144,28 +155,63 @@ struct __antic { #define DL_BLK7 ((unsigned char) 96) #define DL_BLK8 ((unsigned char) 112) + /* Absolute instructions (mode lines) */ -/* Note: Actual width varies (e.g., 40 vs 32 vs 48) depending on normal vs narrow vs wide (overscan) playfield setting; see DMACTL */ + +/* Note: Actual width varies (e.g., 40 vs 32 vs 48) depending on +** normal vs narrow vs wide (overscan) playfield setting; see DMACTL +*/ /* Character modes (text, tile graphics, etc.) */ -#define DL_CHR40x8x1 ((unsigned char) 2) /* monochrome, 40 character & 8 scanlines per mode line (aka Atari BASIC GRAPHICS 0 via OS's CIO routines) */ -#define DL_CHR40x10x1 ((unsigned char) 3) /* monochrome, 40 character & 10 scanlines per mode line (like GR. 0, with descenders) */ -#define DL_CHR40x8x4 ((unsigned char) 4) /* colour, 40 character & 8 scanlines per mode line (GR. 12) */ -#define DL_CHR40x16x4 ((unsigned char) 5) /* colour, 40 character & 16 scanlines per mode line (GR. 13) */ -#define DL_CHR20x8x2 ((unsigned char) 6) /* colour (duochrome per character), 20 character & 8 scanlines per mode line (GR. 1) */ -#define DL_CHR20x16x2 ((unsigned char) 7) /* colour (duochrome per character), 20 character & 16 scanlines per mode line (GR. 2) */ + +/* monochrome, 40 character & 8 scanlines per mode line (aka Atari BASIC GRAPHICS 0 via OS's CIO routines) */ +#define DL_CHR40x8x1 ((unsigned char) 2) + +/* monochrome, 40 character & 10 scanlines per mode line (like GR. 0, with descenders) */ +#define DL_CHR40x10x1 ((unsigned char) 3) + +/* colour, 40 character & 8 scanlines per mode line (GR. 12) */ +#define DL_CHR40x8x4 ((unsigned char) 4) + +/* colour, 40 character & 16 scanlines per mode line (GR. 13) */ +#define DL_CHR40x16x4 ((unsigned char) 5) + +/* colour (duochrome per character), 20 character & 8 scanlines per mode line (GR. 1) */ +#define DL_CHR20x8x2 ((unsigned char) 6) + +/* colour (duochrome per character), 20 character & 16 scanlines per mode line (GR. 2) */ +#define DL_CHR20x16x2 ((unsigned char) 7) + /* Bitmap modes */ -#define DL_MAP40x8x4 ((unsigned char) 8) /* colour, 40 pixel & 8 scanlines per mode line (GR. 3) */ -#define DL_MAP80x4x2 ((unsigned char) 9) /* 'duochrome', 80 pixel & 4 scanlines per mode line (GR.4) */ -#define DL_MAP80x4x4 ((unsigned char) 10) /* colour, 80 pixel & 4 scanlines per mode line (GR.5) */ -#define DL_MAP160x2x2 ((unsigned char) 11) /* 'duochrome', 160 pixel & 2 scanlines per mode line (GR.6) */ -#define DL_MAP160x1x2 ((unsigned char) 12) /* 'duochrome', 160 pixel & 1 scanline per mode line (GR.14) */ -#define DL_MAP160x2x4 ((unsigned char) 13) /* 4 colours, 160 pixel & 2 scanlines per mode line (GR.7) */ -#define DL_MAP160x1x4 ((unsigned char) 14) /* 4 colours, 160 pixel & 1 scanline per mode line (GR.15) */ -#define DL_MAP320x1x1 ((unsigned char) 15) /* monochrome, 320 pixel & 1 scanline per mode line (GR.8) */ + +/* colour, 40 pixel & 8 scanlines per mode line (GR. 3) */ +#define DL_MAP40x8x4 ((unsigned char) 8) + +/* 'duochrome', 80 pixel & 4 scanlines per mode line (GR.4) */ +#define DL_MAP80x4x2 ((unsigned char) 9) + +/* colour, 80 pixel & 4 scanlines per mode line (GR.5) */ +#define DL_MAP80x4x4 ((unsigned char) 10) + +/* 'duochrome', 160 pixel & 2 scanlines per mode line (GR.6) */ +#define DL_MAP160x2x2 ((unsigned char) 11) + +/* 'duochrome', 160 pixel & 1 scanline per mode line (GR.14) */ +#define DL_MAP160x1x2 ((unsigned char) 12) + +/* 4 colours, 160 pixel & 2 scanlines per mode line (GR.7) */ +#define DL_MAP160x2x4 ((unsigned char) 13) + +/* 4 colours, 160 pixel & 1 scanline per mode line (GR.15) */ +#define DL_MAP160x1x4 ((unsigned char) 14) + +/* monochrome, 320 pixel & 1 scanline per mode line (GR.8) */ +#define DL_MAP320x1x1 ((unsigned char) 15) + /* Equivalents, for people familiar with Atari 8-bit OS */ + #define DL_GRAPHICS0 DL_CHR40x8x1 #define DL_GRAPHICS1 DL_CHR20x8x2 #define DL_GRAPHICS2 DL_CHR20x16x2 @@ -196,7 +242,7 @@ struct __antic { #define DL_LMS(x) ((unsigned char)((x) | 64)) /* Load Memory Scan (next two bytes must be the LSB/MSB of the data to load) */ /* General modifier */ -#define DL_DLI(x) ((unsigned char)((x) | 128)) /* enable Display List Interrupt on this mode line; requires NMIEN be set to enable DLIs */ +#define DL_DLI(x) ((unsigned char)((x) | 128)) /* enable Display List Interrupt on this mode line */ /* End of _antic.h */ diff --git a/include/_gtia.h b/include/_gtia.h index 25d26093c..25181e875 100644 --- a/include/_gtia.h +++ b/include/_gtia.h @@ -13,7 +13,7 @@ /* */ /* */ /* (C) 2000 Freddy Offenga */ -/* 2019-01-14: Bill Kendrick : More defines for registers */ +/* 2019-01-16: Bill Kendrick : More defines for registers */ /* */ /* */ /* This software is provided 'as-is', without any expressed or implied */ @@ -39,7 +39,10 @@ #ifndef __GTIA_H #define __GTIA_H -/* Define a structure with the GTIA register offsets for write (W) */ +/*****************************************************************************/ +/* Define a structure with the GTIA register offsets for write (W) */ +/*****************************************************************************/ + struct __gtia_write { unsigned char hposp0; /* 0x00: horizontal position of player 0 */ unsigned char hposp1; /* 0x01: horizontal position of player 1 */ @@ -86,7 +89,10 @@ struct __gtia_write { }; -/* Values for SIZEP0-SIZEP3 and SIZEM registers: */ +/*****************************************************************************/ +/* (W) Values for SIZEP0-SIZEP3 and SIZEM registers: */ +/*****************************************************************************/ + #define PMG_SIZE_NORMAL 0x0 /* one color clock per pixel */ #define PMG_SIZE_DOUBLE 0x1 /* two color clocks per pixel */ #define PMG_SIZE_QUAD 0x2 /* four color clocks per pixel */ @@ -97,7 +103,10 @@ struct __gtia_write { ** Bitwise OR (|) with 0x00 (darkest) through 0x0F (lightest) (only even values are unique) */ -/* PRIOR register values */ + +/*****************************************************************************/ +/* (W) PRIOR register values */ +/*****************************************************************************/ #define PRIOR_P03_PF03 0x01 /* Players 0-3, then Playfields 0-3, then background */ #define PRIOR_P01_PF03_P23 0x02 /* Players 0-1, then Playfields 0-3, then Players 2-3, then background */ @@ -106,35 +115,41 @@ struct __gtia_write { #define PRIOR_5TH_PLAYER 0x10 /* Four missiles combine to be a 5th player (uses COLPF3) */ -#define PRIOR_OVERLAP_3RD_COLOR 0x20 /* Overlap of players result in a 3rd color */ -/* Overlap of players 0 & 1 and of players 2 & 3 results in a third color, -** the logical OR of the two players' colors; -** Other overlaps (e.g., players 0 and 2) result in black (0x00). +/* Causes overlap of players 0 & 1 and of players 2 & 3 to result in a third color, +** the logical OR of the two players' colors, and other overlaps (e.g., players 0 and 2) +** to result in black (0x00). */ +#define PRIOR_OVERLAP_3RD_COLOR 0x20 + + +/*****************************************************************************/ +/* (W) GTIA special graphics mode options for GPRIOR */ +/*****************************************************************************/ -/* GTIA special graphics mode options */ /* Pixels are 2 color clocks wide, and one scanline tall ** (so 80x192 in normal playfield width). ** May be used with both bitmap and character modelines. */ -#define PRIOR_GFX_MODE_9 0x40 /* 16 shade shades of the background (COLBK) hue; ** Note: brightnesses other than 0 (darkest) in COLBK cause additional effects */ +#define PRIOR_GFX_MODE_9 0x40 -#define PRIOR_GFX_MODE_10 0x80 /* 9 color palette mode; ** COLPM0 (acts as background) thru COLPM3, followed by COLPF0 thru COLPF3, and COLBK */ +#define PRIOR_GFX_MODE_10 0x80 -#define PRIOR_GFX_MODE_11 0xC0 /* 16 hues of the background (COLBK) brightness; ** Note: hues other than 0 (greys) in COLBK caus additional effects */ +#define PRIOR_GFX_MODE_11 0xC0 -/* VDELAY register values */ +/*****************************************************************************/ +/* (W) VDELAY register values */ +/*****************************************************************************/ #define VDELAY_MISSILE0 0x01 #define VDELAY_MISSILE1 0x02 @@ -146,18 +161,23 @@ struct __gtia_write { #define VDELAY_PLAYER3 0x80 -/* GRACTL register values */ +/*****************************************************************************/ +/* (W) GRACTL register values */ +/*****************************************************************************/ #define GRACTL_MISSLES 0x01 /* enable missiles */ #define GRACTL_PLAYERS 0x02 /* enable players */ -#define GRACTL_LATCH_TRIGGER_INPUTS 0x04 /* "Latch" triggers; once pressed, will give a continuous ** pressed input until this bit is cleared */ +#define GRACTL_LATCH_TRIGGER_INPUTS 0x04 -/* Define a structure with the GTIA register offsets for read (R) */ +/*****************************************************************************/ +/* Define a structure with the GTIA register offsets for read (R) */ +/*****************************************************************************/ + struct __gtia_read { unsigned char m0pf; /* 0x00: missile 0 to playfield collision */ unsigned char m1pf; /* 0x01: missile 1 to playfield collision */ @@ -189,15 +209,22 @@ struct __gtia_read { }; -/* PAL register possible values */ +/*****************************************************************************/ +/* (R) PAL register possible values */ +/*****************************************************************************/ + +/* Note: This only tells you whether the GTIA is PAL or NTSC; some NTSC +** systems are modded with PAL ANTIC chips; testing VCOUNT limits can be +** done to check for that. Seems like it's not possible to test for SECAM +*/ #define TV_STD_PAL 0x1 #define TV_STD_NTSC 0xE -/* Note: This only tells you whether the GTIA is PAL or NTSC; some NTSC systems are modded with PAL ANTIC chips; testing VCOUNT limits can be done to check for that */ -/* Note: Seems like it's not possible to test for SECAM */ -/* Reading console keys (Start, Select, Option) via CONSOL register: */ +/*****************************************************************************/ +/* Macros for reading console keys (Start/Select/Option) via CONSOL register */ +/*****************************************************************************/ #define CONSOL_START(x) !((unsigned char)((x) & 1)) /* true if Start pressed */ #define CONSOL_SELECT(x) !((unsigned char)((x) & 2)) /* true if Select pressed */ diff --git a/include/_pia.h b/include/_pia.h index dc3830acb..51426cc80 100644 --- a/include/_pia.h +++ b/include/_pia.h @@ -7,11 +7,11 @@ /* The Peripheral Interface Adapter (PIA) chip provides parallel I/O */ /* interfacing; it was used in Atari 400/800 and Commodore PET family of */ /* computers, for joystick and interrupts. */ -/* - Sources; various + Wikpedia article on "Peripheral Interface Adapter" */ +/* Sources; various + Wikpedia article on "Peripheral Interface Adapter". */ /* */ /* */ /* (C) 2000 Freddy Offenga */ -/* 2019-01-14: Bill Kendrick : Defines for registers */ +/* 2019-01-16: Bill Kendrick : Defines for registers */ /* */ /* */ /* This software is provided 'as-is', without any expressed or implied */ @@ -48,7 +48,9 @@ struct __pia { }; -/* PORTA and PORTB register bits */ +/*****************************************************************************/ +/* PORTA and PORTB register bits */ +/*****************************************************************************/ /* See also: "JOY_xxx_MASK" in "atari.h" */ @@ -72,23 +74,23 @@ struct __pia { ** LED control (1200XL model only) register (read/write): */ -#define PORTB_OSROM 0x01 /* If set, the built-in OS is enabled, and occupies the address range $C000-$FFFF ** (except that the area $D000-$D7FF will only access the hardware registers.) ** If clear, RAM is enabled in this area (again, save for the hole.) */ +#define PORTB_OSROM 0x01 -#define PORTB_BASICROM 0x02 /* If set, RAM is enabled for the address range $A000-$BFFF. ** If clear, the built-in BASIC ROM is enabled at this address. ** And if there is a cartridge installed in the computer, it makes no difference. */ +#define PORTB_BASICROM 0x02 -#define PORTB_LED1 0x04 -#define PORTB_LED2 0x08 /* If set, the corresponding LED is turned off. If clear, the LED will be on. ** (1200XL only) */ +#define PORTB_LED1 0x04 +#define PORTB_LED2 0x08 /* On the XE series of computers, PORTB is a bank-selected memory control register (read/write): */ @@ -101,49 +103,59 @@ struct __pia { #define PORTB_BANKSELECT3 0x08 #define PORTB_BANKSELECT4 0x0C - -#define PORTB_BANKSWITCH_CPU 0x10 -#define PORTB_BANKSWITCH_ANTIC 0x20 /* If set, the CPU and/or ANTIC chip will access bank-switched memory mapped to the ** address range $4000-$7FFF. ** If clear, the CPU and/or ANTIC will see normal memory in this region. */ +#define PORTB_BANKSWITCH_CPU 0x10 +#define PORTB_BANKSWITCH_ANTIC 0x20 - -#define PORTB_SELFTEST 0x80 /* If set, RAM is enabled for the address range $5000-$57FF. ** If clear, the self-test ROM (physically located at $D000-$D7FF, under the hardware registers) ** is remapped to this memory area. */ +#define PORTB_SELFTEST 0x80 -/* PACTL and PBCTL register bits */ +/*****************************************************************************/ +/* PACTL and PBCTL register bits */ +/*****************************************************************************/ -#define PxCTL_IRQ_ENABLE 0x01 /* (W) Peripheral A interrupt (IRQ) enable. */ -/* One equals enable. Set by the OS but available to the user; reset on powerup. */ +/* (W) Peripheral A interrupt (IRQ) enable. +** One equals enable. Set by the OS but available to the user; reset on powerup. +*/ +#define PxCTL_IRQ_ENABLE 0x01 -#define PxCTL_BIT1 0x02 /* "Set to zero" */ +/* "Set to zero" */ +#define PxCTL_BIT1 0x02 -#define PxCTL_ADDRESSING 0x04 /* (W) Controls PORTA addressing */ -/* One equals PORTA register; zero equals direction control register */ +/* (W) Controls PORTA addressing +** One equals PORTA register; zero equals direction control register +*/ +#define PxCTL_ADDRESSING 0x04 #define PxCTL_BIT4 0x10 /* "Set to one" */ #define PxCTL_BIT5 0x20 /* "Set to one" */ #define PxCTL_BIT6 0x40 /* "Set to zero" */ -#define PxCTL_IRQ_STATUS 0x80 /* Peripheral interrupt (IRQ) status bit. */ -/* Set by Peripherals (PORTA / PORTB). Reset by reading PORTA / PORTB. */ + +/* Peripheral interrupt (IRQ) status bit. +** Set by Peripherals (PORTA / PORTB). Reset by reading PORTA / PORTB. +*/ +#define PxCTL_IRQ_STATUS 0x80 /* PACTL-specific register bit */ -#define PACTL_MOTOR_CONTROL 0x08 /* (W) Peripheral motor control line */ -/* Turn the cassette on or off; zero equals on) */ +/* (W) Peripheral motor control line +** Turn the cassette on or off; zero equals on) +*/ +#define PACTL_MOTOR_CONTROL 0x08 /* PBCTL-specific register bit */ -#define PBCTL_PERIPH_CMD_IDENT 0x08 /* Peripheral command identification (serial bus command) */ - +/* Peripheral command identification (serial bus command) */ +#define PBCTL_PERIPH_CMD_IDENT 0x08 /* End of _pia.h */ diff --git a/include/_pokey.h b/include/_pokey.h index 01a3225a6..88d6949aa 100644 --- a/include/_pokey.h +++ b/include/_pokey.h @@ -14,7 +14,7 @@ /* */ /* */ /* (C) 2000 Freddy Offenga */ -/* 2019-01-14: Bill Kendrick : More defines for registers */ +/* 2019-01-16: Bill Kendrick : More defines for registers */ /* */ /* */ /* This software is provided 'as-is', without any expressed or implied */ @@ -43,7 +43,10 @@ -/* Define a structure with the POKEY register offsets for write (W) */ +/*****************************************************************************/ +/* Define a structure with the POKEY register offsets for write (W) */ +/*****************************************************************************/ + struct __pokey_write { unsigned char audf1; /* audio channel #1 frequency */ unsigned char audc1; /* audio channel #1 control */ @@ -69,8 +72,9 @@ struct __pokey_write { }; - -/* AUDC1-4 register values */ +/*****************************************************************************/ +/* (W) AUDC1-4 register values */ +/*****************************************************************************/ /* Meaningful values for the distortion bits. ** The first process is to divide the clock value by the frequency, @@ -91,7 +95,9 @@ struct __pokey_write { #define AUDC_VOLUME_ONLY 0x10 -/* AUDCTL register values */ +/*****************************************************************************/ +/* (W) AUDCTL register values */ +/*****************************************************************************/ #define AUDCTL_CLOCKBASE_15HZ 0x01 /* Switch main clock base from 64 KHz to 15 KHz */ #define AUDCTL_HIGHPASS_CHAN2 0x02 /* Insert high pass filter into channel two, clocked by channel four */ @@ -103,7 +109,9 @@ struct __pokey_write { #define AUDCTL_9BIT_POLY 0x80 /* Makes the 17 bit poly counter into nine bit poly (see also: RANDOM) */ -/* IRQEN register values */ +/*****************************************************************************/ +/* (W) IRQEN register values */ +/*****************************************************************************/ #define IRQEN_TIMER_1 0x01 /* The POKEY timer one interrupt is enabled */ #define IRQEN_TIMER_2 0x02 /* The POKEY timer two interrupt is enabled */ @@ -115,49 +123,57 @@ struct __pokey_write { #define IRQEN_BREAK_KEY 0x80 /* The BREAK key is enabled */ -/* SKCTL register values */ +/*****************************************************************************/ +/* (W) SKCTL register values */ +/*****************************************************************************/ #define SKCTL_KEYBOARD_DEBOUNCE 0x01 /* Enable keyboard debounce circuits */ #define SKCTL_KEYBOARD_SCANNING 0x02 /* Enable keyboard scanning circuit */ -#define SKCTL_FAST_POT_SCAN 0x04 /* Fast pot scan */ -/* The pot scan counter completes its sequence in two TV line times instead of +/* Fast pot scan +** The pot scan counter completes its sequence in two TV line times instead of ** one frame time (228 scan lines). Not as accurate as the normal pot scan */ +#define SKCTL_FAST_POT_SCAN 0x04 -#define SKCTL_TWO_TONE_MODE 0x08 /* POKEY two-tone mode */ -/* Serial output is transmitted as a two-tone signal rather than a logic true/false. */ +/* POKEY two-tone mode +** Serial output is transmitted as a two-tone signal rather than a logic true/false. +*/ +#define SKCTL_TWO_TONE_MODE 0x08 + +/* Force break (serial output to zero) */ +#define SKCTL_FORCE_BREAK 0x80 /* Bits 4, 5, and 6 of SKCTL set Serial Mode Control: */ -#define SKCTL_SER_MODE_TX_EXT_RX_EXT 0x00 /* Trans. & Receive rates set by external clock; Also internal clock phase reset to zero. */ +#define SKCTL_SER_MODE_TX_EXT_RX_EXT 0x00 -#define SKCTL_SER_MODE_TX_EXT_RX_ASYNC 0x10 /* Trans. rate set by external clock; Receive asynch. (ch. 4) (CH3 and CH4). */ +#define SKCTL_SER_MODE_TX_EXT_RX_ASYNC 0x10 -#define SKCTL_SER_MODE_TX_CH4_RX_CH4_BIDIR 0x20 /* Trans. & Receive rates set by Chan. 4; Chan. 4 output on Bi-Direct. clock line. */ +#define SKCTL_SER_MODE_TX_CH4_RX_CH4_BIDIR 0x20 /* N.B.: Bit combination 0,1,1 not useful */ -#define SKCTL_SER_MODE_TX_CH4_RX_EXT 0x40 /* Trans. rate set by Chan. 4; Receive rate set by external clock. */ +#define SKCTL_SER_MODE_TX_CH4_RX_EXT 0x40 /* N.B.: Bit combination 1,0,1 not useful */ -#define SKCTL_SER_MODE_TX_CH2_RX_CH4_BIDIR 0x60 /* Trans. rate set by Chan. 2; Receive rate set by Chan. 4; Chan. 4 out on Bi-Direct. clock line. */ +#define SKCTL_SER_MODE_TX_CH2_RX_CH4_BIDIR 0x60 -#define SKCTL_SER_MODE_TX_CH4_RX_ASYNC 0x70 /* Trans. rate set by Chan. 2; Receive asynch. (chan 3 & 4); Bi-Direct. clock not used (tri-state condition). */ +#define SKCTL_SER_MODE_TX_CH4_RX_ASYNC 0x70 -#define SKCTL_FORCE_BREAK 0x80 /* Force break (serial output to zero) */ - +/*****************************************************************************/ +/* Define a structure with the POKEY register offsets for read (R) */ +/*****************************************************************************/ -/* Define a structure with the POKEY register offsets for read (R) */ struct __pokey_read { unsigned char pot0; /* paddle 0 value */ unsigned char pot1; /* paddle 1 value */ @@ -178,7 +194,10 @@ struct __pokey_read { }; -/* SKSTAT register values */ +/*****************************************************************************/ +/* (R) SKSTAT register values */ +/*****************************************************************************/ + #define SKSTAT_SERIN_SHIFTREG_BUSY 0x02 /* Serial input shift register busy */ #define SKSTAT_LASTKEY_PRESSED 0x04 /* the last key is still pressed */ #define SKSTAT_SHIFTKEY_PRESSED 0x08 /* the [Shift] key is pressed */ @@ -188,120 +207,14 @@ struct __pokey_read { #define SKSTAT_INPUT_FRAMEERROR 0x80 /* Serial data input frame error caused by missing or extra bits. Reset latches as above. */ -/* KBCODE internal keyboard codes for Atari 8-bit computers*/ - -/* Defined below in the order the keys appear on a 1200XL keyboard, -** from top left to bottom right. -** Note: Numerous Shift+Ctrl+key combos are unavailable. -** (Source: "Compute!'s Thrid Book of Atari", "Reading the Keyboard Codes") +/* KBCODE, internal keyboard codes for Atari 8-bit computers, +** are #defined as "KEY_..." in "atari.h". +** Note some keys are not read via KBCODE: +** - Reset +** - Start, Select, and Option; see CONSOL in "gtia.h" +** - Break */ -#define KEYCODE_NONE 255 /* No key pressed (but also Ctrl+Shift+A) */ - - -/* Special keys: */ - -/* N.B. Reset key not handled like other keys */ - -/* N.B. Select, Start, and Option console keys not handled like other keys; -** see CONSOL register in GTIA -*/ - -/* Fn (function) keys only available on 1200XL */ -#define KEYCODE_F1 3 -#define KEYCODE_F2 4 -#define KEYCODE_F3 19 -#define KEYCODE_F4 20 - -/* HELP key only available on XL/XE series */ -#define KEYCODE_HELP 17 - -/* N.B. Break key not handled like other keys */ - - -/* Keyboard top row */ - -#define KEYCODE_ESC 28 -#define KEYCODE_1 31 -#define KEYCODE_2 30 -#define KEYCODE_3 26 -#define KEYCODE_4 24 -#define KEYCODE_5 29 -#define KEYCODE_6 27 -#define KEYCODE_7 51 -#define KEYCODE_8 53 -#define KEYCODE_9 48 -#define KEYCODE_0 50 -#define KEYCODE_LT 54 -#define KEYCODE_GT 55 -#define KEYCODE_BKSPC 52 - - -/* Keyboard second row */ - -#define KEYCODE_TAB 44 -#define KEYCODE_Q 47 -#define KEYCODE_W 46 -#define KEYCODE_E 42 -#define KEYCODE_R 40 -#define KEYCODE_T 45 -#define KEYCODE_Y 43 -#define KEYCODE_U 11 -#define KEYCODE_I 13 -#define KEYCODE_O 8 -#define KEYCODE_P 10 -#define KEYCODE_MINUS 14 -#define KEYCODE_EQUALS 15 -#define KEYCODE_RETURN 12 - - -/* Keyboard third row */ - -#define KEYCODE_CTRL 128 /* binary OR'd */ -/* N.B. Cannot read Ctrl key alone */ - -#define KEYCODE_A 63 -#define KEYCODE_S 62 -#define KEYCODE_D 58 -#define KEYCODE_F 56 -#define KEYCODE_G 61 -#define KEYCODE_H 57 -#define KEYCODE_J 1 -#define KEYCODE_K 5 -#define KEYCODE_L 0 -#define KEYCODE_SEMICOLON 2 -#define KEYCODE_PLUS 6 -#define KEYCODE_ASTERISK 7 -#define KEYCODE_CAPS 60 - - -/* Keyboard bottom row */ - -#define KEYCODE_SHIFT 64 /* binary OR'd */ -/* N.B. Cannot read Shift key alone via KBCODE; -** instead, check "Shfit key press" bit of SKSTAT register -*/ - -#define KEYCODE_Z 23 -#define KEYCODE_X 22 -#define KEYCODE_C 18 -#define KEYCODE_V 16 -#define KEYCODE_B 21 -#define KEYCODE_N 35 -#define KEYCODE_M 37 -#define KEYCODE_COMMA 32 -#define KEYCODE_PERIOD 34 -#define KEYCODE_SLASH 38 -#define KEYCODE_FUJI 39 /* (as seen on 400/800) */ -#define KEYCODE_INVERSE 39 /* (alternative name; as seen on XL/XE) */ - -/* N.B. No way to tell left from right Shift keys */ - - -/* Keyboard Space key */ - -#define KEYCODE_SPACE 33 - /* End of _pokey.h */ #endif /* #ifndef __POKEY_H */ diff --git a/include/atari.h b/include/atari.h index 613f0e5bb..af4e6209a 100644 --- a/include/atari.h +++ b/include/atari.h @@ -6,9 +6,10 @@ /* */ /* */ /* */ -/* (C) 2000-2018 Mark Keates */ +/* (C) 2000-2019 Mark Keates */ /* Freddy Offenga */ /* Christian Groessler */ +/* Bill Kendrick */ /* */ /* */ /* This software is provided 'as-is', without any expressed or implied */ @@ -44,7 +45,10 @@ -/* Character codes */ +/*****************************************************************************/ +/* Character codes */ +/*****************************************************************************/ + #define CH_DELCHR 0xFE /* delete char under the cursor */ #define CH_ENTER 0x9B #define CH_ESC 0x1B @@ -87,7 +91,9 @@ #define CH_VLINE 0x7C -/* Color definitions */ +/*****************************************************************************/ +/* Color definitions */ +/*****************************************************************************/ /* Make a GTIA color value */ #define _gtia_mkcolor(hue,lum) (((hue) << 4) | ((lum) << 1)) @@ -155,7 +161,11 @@ #define TGI_COLOR_LIGHTBLUE COLOR_LIGHTBLUE #define TGI_COLOR_GRAY3 COLOR_GRAY3 -/* Masks for joy_read */ + +/*****************************************************************************/ +/* Masks for joy_read */ +/*****************************************************************************/ + #define JOY_UP_MASK 0x01 #define JOY_DOWN_MASK 0x02 #define JOY_LEFT_MASK 0x04 @@ -165,7 +175,11 @@ #define JOY_FIRE_MASK JOY_BTN_1_MASK #define JOY_FIRE(v) ((v) & JOY_FIRE_MASK) -/* Keyboard values returned by kbcode / CH */ + +/*****************************************************************************/ +/* Keyboard values returned by kbcode / CH */ +/*****************************************************************************/ + #define KEY_NONE ((unsigned char) 0xFF) #define KEY_0 ((unsigned char) 0x32) @@ -226,15 +240,26 @@ #define KEY_INVERSE ((unsigned char) 0x27) #define KEY_HELP ((unsigned char) 0x11) +/* Function keys only exist on the 1200XL model. */ #define KEY_F1 ((unsigned char) 0x03) #define KEY_F2 ((unsigned char) 0x04) #define KEY_F3 ((unsigned char) 0x13) #define KEY_F4 ((unsigned char) 0x14) +/* N.B. Cannot read Ctrl key alone */ #define KEY_CTRL ((unsigned char) 0x80) + +/* N.B. Cannot read Shift key alone via KBCODE; +** instead, check "Shfit key press" bit of SKSTAT register. +** Also, no way to tell left Shift from right Shift. +*/ #define KEY_SHIFT ((unsigned char) 0x40) -/* Composed keys */ + +/* Composed keys +** (Other combinations are possible, including Shift+Ctrl+key, +** though not all such combinations are available.) +*/ #define KEY_EXCLAMATIONMARK (KEY_1 | KEY_SHIFT) #define KEY_QUOTE (KEY_2 | KEY_SHIFT) @@ -262,18 +287,29 @@ #define KEY_LEFT (KEY_PLUS | KEY_CTRL) #define KEY_RIGHT (KEY_ASTERISK | KEY_CTRL) -/* Color register functions */ + +/*****************************************************************************/ +/* Color register functions */ +/*****************************************************************************/ + extern void __fastcall__ _setcolor (unsigned char color_reg, unsigned char hue, unsigned char luminace); extern void __fastcall__ _setcolor_low (unsigned char color_reg, unsigned char color_value); extern unsigned char __fastcall__ _getcolor (unsigned char color_reg); -/* Other screen functions */ +/*****************************************************************************/ +/* Other screen functions */ +/*****************************************************************************/ + extern int __fastcall__ _graphics (unsigned char mode); /* mode value same as in BASIC */ extern void __fastcall__ _scroll (signed char numlines); /* numlines > 0 scrolls up */ /* numlines < 0 scrolls down */ -/* Misc. functions */ + +/*****************************************************************************/ +/* Misc. functions */ +/*****************************************************************************/ + extern unsigned char get_ostype(void); /* get ROM version */ extern unsigned char get_tv(void); /* get TV system */ extern void _save_vecs(void); /* save system vectors */ @@ -281,7 +317,11 @@ extern void _rest_vecs(void); /* restore system vectors */ extern char *_getdefdev(void); /* get default floppy device */ extern unsigned char _is_cmdline_dos(void); /* does DOS support command lines */ -/* Global variables */ + +/*****************************************************************************/ +/* Global variables */ +/*****************************************************************************/ + extern unsigned char _dos_type; /* the DOS flavour */ #ifndef __ATARIXL__ extern void atr130_emd[]; @@ -335,7 +375,11 @@ extern void atrx15_tgi[]; extern void atrx15p2_tgi[]; #endif -/* get_ostype return value defines (for explanation, see ostype.s) */ + +/*****************************************************************************/ +/* get_ostype return value defines (for explanation, see ostype.s) */ +/*****************************************************************************/ + /* masks */ #define AT_OS_TYPE_MAIN 7 #define AT_OS_TYPE_MINOR (7 << 3) @@ -358,11 +402,19 @@ extern void atrx15p2_tgi[]; #define AT_OS_XLXE_3 3 #define AT_OS_XLXE_4 4 -/* get_tv return values */ + +/*****************************************************************************/ +/* get_tv return values */ +/*****************************************************************************/ + #define AT_NTSC 0 #define AT_PAL 1 -/* valid _dos_type values */ + +/*****************************************************************************/ +/* valid _dos_type values */ +/*****************************************************************************/ + #define SPARTADOS 0 #define REALDOS 1 #define BWDOS 2 @@ -372,7 +424,11 @@ extern void atrx15p2_tgi[]; #define MYDOS 6 #define NODOS 255 -/* Define hardware */ + +/*****************************************************************************/ +/* Define hardware and where they're mapped in memory */ +/*****************************************************************************/ + #include <_gtia.h> #define GTIA_READ (*(struct __gtia_read*)0xD000) #define GTIA_WRITE (*(struct __gtia_write*)0xD000) @@ -389,7 +445,11 @@ extern void atrx15p2_tgi[]; #include <_antic.h> #define ANTIC (*(struct __antic*)0xD400) -/* device control block */ + +/*****************************************************************************/ +/* Device control block */ +/*****************************************************************************/ + struct __dcb { unsigned char device; /* device id */ unsigned char unit; /* unit number */ @@ -404,7 +464,11 @@ struct __dcb { }; #define DCB (*(struct __dcb *)0x300) -/* I/O control block */ + +/*****************************************************************************/ +/* I/O control block */ +/*****************************************************************************/ + struct __iocb { unsigned char handler; /* handler index number (0xff free) */ unsigned char drive; /* device number (drive) */ -- 2.39.5