]> git.sur5r.net Git - openocd/shortlog
openocd
2008-07-21 oharboejim license cleanup
2008-07-21 oharboeupdate jtag_speed/khz docs a bit.
2008-07-21 oharboe- jtag_khz/speed are now single parameter only. These...
2008-07-21 oharboecross compile fix
2008-07-21 oharboeuse reset init explicitly before "load".
2008-07-21 oharboeDuane Ellis <openocd@duaneellis.com> stm32 peripherals...
2008-07-21 oharboeMichael Kurz <michi.kurz@googlemail.com> MX29LV800B...
2008-07-20 oharboeBUG: prefix to timeout for gdb keep alive packets.
2008-07-20 ntfreak- added svn props for newly added files
2008-07-20 oharboeDuane Ellis <openocd@duaneellis.com> - script commands...
2008-07-20 oharboeBen Bodley <ben@teknique.com> non-CFI compliant flash...
2008-07-20 oharboeDuane Ellis <openocd@duaneellis.com>
2008-07-20 oharboeopenocd@duaneellis.com fix naming confusion. Use ocd_...
2008-07-19 oharboethrow exception upon syntax error.
2008-07-19 ntfreak- updated texi for removed daemon_startup command
2008-07-19 oharboeclarify error message w.r.t. not being able to set...
2008-07-19 oharboedaemon_startup is now retired in favour of adding ...
2008-07-18 oharboeThis allows overriding builtin openocd commands.
2008-07-18 oharboeremove obsolete reset_mode
2008-07-18 oharboe"reset" without arguments now execute a "reset run".
2008-07-18 ntfreak- remove build warning from keep_alive
2008-07-18 ntfreak- fix incorrectly registered function openocd_array2mem
2008-07-18 oharboeresume is now asynchronous
2008-07-18 oharboekeep_alive() fix for reset warnings.
2008-07-18 oharboe1. GDB will print cryptic error messages if it is not...
2008-07-18 oharboeDuane Ellis <openocd@duaneellis.com> more interface...
2008-07-18 oharboeCharles Hardin <ckhardin@gmail.com> move tcl stuff...
2008-07-18 oharboeadded missing "reset+load" sequence.
2008-07-17 oharboeCharles Hardin <ckhardin@gmail.com> move jim into...
2008-07-17 oharboeCharles Hardin ckhardin at gmail.com Instead of stash...
2008-07-17 oharboeCollect output from openocd commands into openocd_outpu...
2008-07-17 oharboeCharles Hardin ckhardin at gmail.com
2008-07-17 oharboeCharles Hardin <ckhardin@gmail.com> and Øyvind Harboe
2008-07-17 ntfreak- reverted resume_target to old behaviour
2008-07-17 oharboeCharles Hardin ckhardin at gmail.com bin2char does...
2008-07-16 oharboeFixes to \ and / handling for OpenOCD
2008-07-16 oharboeflash_banks now follow OpenOCD scripting API rules
2008-07-16 oharboeprint out jim error message stack trace in expected...
2008-07-16 oharboedo not print jim tcl error message trace for ERROR_COMM...
2008-07-16 oharboeprint syntax for command upon syntax error.
2008-07-16 oharboebetter error messages for target event scripts.
2008-07-15 oharboefeeble beginnings for tcl api rules.
2008-07-15 ntfreak- stm32 flash driver correctly handles early silicon
2008-07-14 oharboeCharles Hardin <ckhardin@gmail.com>
2008-07-13 ntfreak- remove unused objcopy from configure.in
2008-07-13 ntfreak- added svn props for newly added files
2008-07-13 oharboeCharles Hardin <ckhardin@gmail.com> - hopefully final...
2008-07-13 oharboeDuane Ellis <openocd@duaneellis.com> fix to tcl puts
2008-07-12 ntfreak- fix issue when building in separate build dir
2008-07-12 ntfreak- remove requirement for file2c.tcl
2008-07-12 oharboetesting/*.tcl sample & test code
2008-07-12 oharboetesting/*.tcl sample & test code
2008-07-11 oharboehelp is now implemented in startup.tcl/help
2008-07-11 ntfreak- configure check added for tclsh
2008-07-11 oharboesearch help text too
2008-07-11 oharboeCharles Hardin ckhardin at gmail.com
2008-07-11 oharboetcl_help prettier output.
2008-07-11 oharboework in progress to improve help
2008-07-11 oharboe- retired variable stuff.
2008-07-11 oharboe.cfg files are now executed as Jim Tcl. Commands that...
2008-07-11 ntfreak- added svn props for newly added files
2008-07-11 oharboeworking notes.
2008-07-11 oharboestartup.tcl (former commands.tcl) is now embedded into...
2008-07-10 oharboeCharles Hardin <ckhardin@gmail.com>
2008-07-10 oharboe- added search paths before running tcl/commands.tcl.
2008-07-10 oharboefix quoting problem when handling OpenOCD commands.
2008-07-10 oharboeSEGFAULT fix for syntax error.
2008-07-10 oharboevery slight cleanup of flash banks handling.
2008-07-09 oharboeimprove error messages a little bit.
2008-07-09 ntfreak- adding missing install entry for luminary-libftdi.cfg
2008-07-09 oharboe"flash banks" is now implemented in Tcl on top of ...
2008-07-09 ntfreak- added luminary libftdi interface config
2008-07-09 ntfreak- only check normal resume, not debug resume
2008-07-09 oharboeadded flash_banks low level command.
2008-07-09 ntfreak- target_resume is now synchronous with 5sec timeout
2008-07-08 oharboetcl regression fixes.
2008-07-08 oharboe * src/jim.c: remove bogus return value from if {[expr...
2008-07-08 ntfreak- removed target_process_events as only used in handle_...
2008-07-08 ntfreak- fix pre_resume script not being called
2008-07-08 ntfreak- apply correct formatting to openocd.c
2008-07-07 oharboereset event is synonym for post_reset event.
2008-07-07 oharboemore tcl cleanup.
2008-07-07 oharboeDuane Ellis <openocd@duaneellis.com>: This simple patch...
2008-07-07 ntfreak- command_run_line will only search once for the comman...
2008-07-07 oharboeadded pre/postlude fn's for when OpenOCD is sleeping.
2008-07-07 oharboefix syntax error.
2008-07-07 oharboeCharles Hardin <ckhardin@gmail.com> Tcl server document...
2008-07-06 ntfreak- fix duplicate log entry
2008-07-06 ntfreak- fix typo in memory.tcl
2008-07-06 ntfreak- fixed build issues with win32
2008-07-06 oharboemoving Tcl stuff around slightly.
2008-07-06 oharboefix a few compilation problems.
2008-07-06 oharboeCharles Hardin <ckhardin@gmail.com> - Tcl Server
2008-07-06 oharboeOopss. Forgot to list Duane Ellis <openocd@duaneellis...
2008-07-06 oharboesrc/helper/configuration.h
2008-07-05 ntfreak- added search for libdl
2008-07-04 ntfreak- added svn props for newly added files
2008-07-04 ntfreak- added event scripts for str73x and str75x targets
2008-07-04 ntfreak- added jtag_khz to target scripts
2008-07-04 ntfreak- fixed line endings with commands.tcl
next