]> git.sur5r.net Git - openocd/shortlog
openocd
2010-10-01 Øyvind Harboeserver: split file descriptors in in/out fd's
2010-10-01 Øyvind Harboeserver: rely on ctrl-c to stop openocd
2010-10-01 Øyvind Harboelog: remove hack to redirect logs when pipes are in use
2010-10-01 Luca BrunoUpdate ep93xx and at91rm9200 drivers
2010-09-29 Øyvind Harboefileio: fileio_size() can now fail
2010-09-29 Øyvind Harboefileio: refactor struct fileio to be an opaque structure
2010-09-28 Antonio BorneoTCL scripts: fix ocd_mem2array/mem2array
2010-09-27 Øyvind Harboeflash: fix error handling
2010-09-27 Øyvind Harboeimage: fix spelling mistake
2010-09-27 Zachary T WelchFix omap3_dbginit to write to physical memory.
2010-09-26 Øyvind Harboezy1000: fix non-JTAG master build
2010-09-26 Øyvind Harboegdb: fix blank line at top
2010-09-21 Øyvind Harboejtagdp: remove #if 0'd kludges and explain why the...
2010-09-21 Øyvind Harboeflash: fix error handling
2010-09-21 Øyvind Harboeembeddedice: fix error handling
2010-09-21 Antonio BorneoTCL scripts: collect duplicated procedures
2010-09-20 Øyvind Harboestartup: removed capture_catch
2010-09-20 Øyvind Harboehelper: fix flaky capture command
2010-09-20 Øyvind Harboetcl_server: switch to ctrl-z
2010-09-20 Øyvind Harboelogging: turn of stdout/stderr buffering
2010-09-20 Øyvind Harboezy1000: add support for Linux host
2010-09-20 Øyvind Harboejtag: build jtag first because it generates header...
2010-09-20 Øyvind Harboewarnings: fix alignment warnings
2010-09-20 Øyvind Harboezy1000: split out configure option for eCos and JTAG...
2010-09-20 Øyvind Harboezy1000: remove obsolete debug code
2010-09-20 Øyvind Harboetcl: remove incomplete unused tcl file
2010-09-20 Mike Dunnxscale: some wp detail added to user manual
2010-09-20 Mike Dunnxscale: check that wp length does not exceed address
2010-09-20 Mike Dunnxscale: bp/wp: additional LOG_ERROR on failure
2010-09-20 Karl KurbjunAM/DM37x: Unify configuration scripts and add support...
2010-09-15 Flemming Futtrupcfi: add sst39vf6401b
2010-09-14 Øyvind Harboebreakpoints: fix error handling
2010-09-14 Takács Áronboard scripts: Marvell PXA270M processor has a new...
2010-09-13 Mike Dunnxscale: fix sw breakpoints for thumb; set bp immediately
2010-09-13 Mike Dunnpropagate return status of set_breakpoint() up call...
2010-09-12 Øyvind Harboehelper: add stacktrace command that returns error stack...
2010-09-12 Øyvind Harboejim: fix crash when using Jim_ListInsertElements
2010-09-11 Øyvind Harboeversion command: make it scriptable
2010-09-11 Øyvind Harboecommand: capture command now handles both types commands
2010-09-11 Øyvind Harboecfi: random crash in cfi_probe() fixed
2010-09-11 Øyvind Harboecfi: tighten up type usage a bit
2010-09-09 Mike Dunnxscale: mark xscale registers invalid on debug entry
2010-09-08 Alexander SteinRemove duplicated initialization
2010-09-07 Øyvind Harboewarning: fix silly -O3 warning
2010-09-03 Øyvind Harboejtag: fix regression with dummy driver and when startin...
2010-09-03 WookeyNumonyx M29W160ET patch
2010-08-31 Spencer Olivercortex m3: add cortex_m3 reset_config cmd
2010-08-31 Spencer Oliverflash: increase stellaris flash loader buffer
2010-08-31 Spencer Olivercfg: update Luminary config files
2010-08-27 David Brownellbitq: unshadow pause()
2010-08-19 Øyvind Harboeimx35pdk: fix clock and reset delays
2010-08-17 Øyvind Harboemcb1700: Keil MCB1700 w/1768 config script
2010-08-16 David Brownellupdate more Stellaris EK board comments
2010-08-16 David Brownelltwo NEWS updates
2010-08-16 David BrownellUpdate comments for some Stellaris EK boards.
2010-08-15 Oleksandr Tymoshenkoavr32: basic target script
2010-08-15 David Brownellat32ap7000 config file
2010-08-15 Oleksandr Tymoshenkoavr32: work-in-progress
2010-08-14 Catalin PatuleaFix typo in usb_blaster_vid_pid error message
2010-08-13 Catalin PatuleaFix typo in documentation of usb_blaster_vid_pid command
2010-08-13 Øyvind Harboelpc1768: turn down the jtag clock
2010-08-13 Piotr Esden... Added support for the Lisa/L jtag LEDs.
2010-08-13 Piotr Esden... Added Lisa/L script as a target board.
2010-08-13 Piotr Esden... Added support for Lisa/L builtin JTAG interface.
2010-08-12 Øyvind Harboeat91cap7a-stk-sdram.cfg: faster reset
2010-08-12 Thomas Koellerjtag: fix handling of 'tap enable' error
2010-08-12 Thomas KoellerDM36x: Set OSCDIV divider
2010-08-12 Thomas KoellerDM36x: Disable unused SYSCLKs
2010-08-12 Thomas KoellerDM36x: Use enable bit for PLL pre-divider
2010-08-12 Fredrik Hederstiernastr9x: faster flash erase of entire chip
2010-08-11 Øyvind Harboetcl: remove silly ocd_ prefix to array2mem and mem2array
2010-08-11 Øyvind Harboeboard: added at91cap7a stk w/sdram config scripts
2010-08-11 Øyvind Harboedebug: use assert's when approperiate
2010-08-11 Øyvind Harboearm: add missing error reporting
2010-08-11 Øyvind Harboeconfig scripts: remove useless reference to OpenOCD...
2010-08-10 Ben Gardinercfg: add omapl138 support and da850evm preliminary...
2010-08-09 Øyvind Harboearm7/9: fix "reset run + halt"
2010-08-09 Øyvind Harboetarget: if polling fails, back off
2010-08-04 David BrownellLuminary-icdi comment update
2010-08-02 Mike Dunnxscale documentation: vector table handling
2010-08-02 Øyvind Harboeverify_image: print out a statement that there are...
2010-08-02 Øyvind Harboezy1000: use correct base clock when calculating speed...
2010-08-02 Øyvind Harboezy1000: print out khz correctly in response to setting...
2010-08-02 Øyvind Harboelpc1768: even if rclk "works", it isn't necessarily...
2010-08-02 Øyvind Harboeioutil: fix internal fn names
2010-08-02 Øyvind Harboejtag: measure_clk debug proc
2010-08-02 Øyvind Harboejtag: add jtag_flush_queue_sleep debug command
2010-08-01 Øyvind Harboeutil: ms command to calculate length of operations
2010-08-01 Peter StugeSupport NGX Technologies product NGX ARM USB JTAG
2010-08-01 Peter StugeRemove srst_pulls_trst from LPC2148 target
2010-08-01 David Brownellstellaris flash comment update
2010-07-30 Øyvind Harboelpc7168: make flash available upon reset init
2010-07-24 David Brownell"transport select" returns Jim value
2010-07-23 Michal DeminBuspirate: fix shadow
2010-07-20 Spencer Oliverdocs: removed unused cmd 'fast'
2010-07-20 Spencer Oliverflash: remove algorithm exit_point address for supporte...
2010-07-20 Spencer Olivermips32: exit_point optional for mips32_run_algorithm
2010-07-20 Spencer Oliverarmv7m: exit_point optional for armv7m_run_algorithm
2010-07-20 Spencer Oliverarmv4_5: add algorithms instruction breakpoint support
2010-07-20 Øyvind Harboearm11 error propagation fixes
next