Release Notes for Bacula 9.0.8

Release 9.0.8

This is a minor release that fixes a couple of bugs and corrects
some copyrights that were not totally correct.

28May18
 - Fix bug #2212 where restore jobid=nn file=xxx restores the files twice
 - Pull regression truncate-test from Branch-9.1
 - Apply patch from Wandlei Huttel to add Run Time and suffix to Restored 
   bytes
 - Fix bug #2343 where truncate of explicit Volume name truncates non-purged 
   volumes
 - Fix some file execute permissions. Fixes bug #2389
 - Fix license problems in Bug #2382
 - Apply patch from Leo to fix bug 2192
 - Fix bad placement of jcr->pool reference as pointed out by Martin Simmons
 - rpm: Add OpenSuse Leap 42.3
 - rpm: Update bacula.spec for Fedora 27
 - baculum: Fix SQL grouping error in restore wizard reported by Rasmus Linden
 - Update some old copyrights
 - baculum: Update Portuguese translations
 - Remove old Bacula Systems notices

Bugs fixed/closed since last release:
2212 2320 2349 2354 2379 2382 2383 2330 2054
2343 2369 2194 2359 2151 2366 2353 2381 2378


=======================================================

Release 9.0.7

This is a significant release because it now has the Windows code
reintegrated and updated to work with this version.  Other than
Baculum updates and the new Windows update, there is no significant
change to the other code.  

If you wish to use the Windows 9.0.7 File daemon binaries with 
your existing 9.0.x Bacula Director and Storage daemon it should
work fine but has not been tested.

The 64 bit version of the Windows binaries has been installed and
very quickly tested, as a consequence, please test it carefully before
putting into production.  There seem to be some minor installation errors
that are probably related to .conf files.  Also the Windows binaries do
not yet contain the tray-monitor or the old Exchange plug.  Both currently
fail to build.

18Apr18
 - Remove NSIS debug
 - baculum: Fix opening configuration tabs bug reported by Heitor Faria
 - Restore win32 dir from Branch-5.2 and update it
 - Add Phil Stracchino's fix for Qt5
 - baculum: Fix saving boolean values in schedule Run directive
 - rpm: Add Fedora26-64 platform
 - baculum: Add link to go back from job configuration window
 - Use correct SQL table encoding for Postgresql 10.x
 - baculum: Add listbox control and use it for base and device directives
 - baculum: Fix showing verify job fields in job run configuration window
 - baculum: Revert back volume pool name in volume list window
 - baculum: Fix error message about disabled bconsole
 - baculum: API endpoints code refactor
 - baculum: Add state, number, boolean and id validators
 - baculum: Return bconsole disabled error if bconsole support isn't enabled
 - baculum: Remove unused api endpoints
 - baculum: Fix oauth2 client working in the web part
 - baculum: Fix auth setting radio buttons alignement
 - baculum: Enlarge interface height to 100%
 - baculum: Add more information to cURL error
 - baculum: New reworked restore wizard
 - baculum: Wizards view improvements
 - baculum: Add restore hardlinks support in api
 - baculum: Add strip_prefix, add_prefix, add_suffix and regex_where restore 
   options to api restore
 - Port missing RestoreObject Plugin Config code from BEE.
 - baculum: Stop using hidden fields to store item identifiers
 - baculum: Fix redundant loading users portlet
 - baculum: Add required config fields asterisk mark

Bugs fixed/closed since last release:
None


==============================================================

Release 9.0.6

This is a bug fix and enhancement release. The two major enhancements are
support for Qt5 in bat and the tray monitor, and support for OpenSSL-1.1.
There were also a number of nice bug fixes. Thanks to the users who 
supplied patches for the enhancements and bug fixes. They are much 
appreciated.


19Nov17
 - Update AUTHORS for recent commits
 - Remove incorrecly placed openssl-compat.h
 - Add openssl-compat.h which went in wrong directory
 - baculum: Add removing single resource
 - baculum: Add module to check resource dependencies
 - baculum: Fix saving names with spaces inside schedule Run directive
 - baculum: Fix saving entire config by api request
 - Backout vol size tests in previous attempt to fix bug #2349
 - Fix compiler warning in previous patch
 - Apply patches from bugs #2325 and #2326 to fix FIFO bugs
 - Fix bug #2315 INTEGER misspelled in update_sqlite3_tables.in
 - Try to fix bug #2349 multiple recycle messages
 - Add support for items with comma in ini_store_alist_str()
 - Fix segfault after the reload of an incorrect configuration
 - Add temporary fix to avoid a deadlock after a reload command on an incorrect 
   configuration
 - baculum: Throw 404 error if service not known
 - Fix race condition between setip and the access to CLIENT::address()
 - Fix #3284 about Client address not reloaded properly
 - baculum: Use home page url when an error is shown
 - Fix bug #2346 Dir blocks when max reloads reached
 - baculum: Send config to api server as json
 - Remove enterprise code that breaks Mac install -- fixes bug #2351
 - Correct FS size calculation for FreeBSD, Solaris, and Windows
 - baculum: Enable Portuguese language support in makefile
 - baculum: Fix required directives in schedule resource configuration
 - baculum: Fix saving messages resource
 - baculum: Improve slow reloading config resource list
 - crypto: remove most of OpenSSL initcallbacks for 1.1
 - Update ACL/XATTR code and define new ACL/XATTR API for Plugins.
 - baculum: Fix numeric password setting bug reported by Heitor Faria
 - crypto: convert EVP_PKEY access and remainings bits for OpenSSL 1.1
 - crypto: convert EVP_MD_CTX + EVP_CIPHER_CTX to OpenSSL 1.1
 - crypto: Use DEFINE_STACK_OF()
 - crypto: Add a tiny OpenSSL compat level
 - crypto: remove support for ancient openssl
 - fix #3269 obey the user choice of "Are you sure you want to delete X JobIds
 - Add restore wizard to the tray monitor.
 - Preparation fixes: remove some warning
 - Add ASSERTD() to track NULL Volume name error
 - Add "noautoparent" restore command option to disable the automatic parent 
  directory selection
 - Make qt-console compatible to Qt5 (Qt4 still work)

Bugs fixed/closed since last release:
2315 2325 2346 2349 2351


======================================================================

Release 9.0.5

This is an important bug fix release.  In particular it fixes the cases
where Bacula would print a very large number of error messages. Additional
backported code from Bacula Enterprise is included as well as updates to
the rpm scripts.  A number of minor Baculum issues have also been
corrected.

01Nov17
 - Use if exists on dropping MAC table in postgres. Fixes bug #2314
 - Fix bdirjson display of Minutes. Fixes bug #2318
 - baculum: Set default language if no language set
 - baculum: Fix language setting in api
 - baculum: Update generated .mo files for api
 - baculum: Add missing texts to translations
 - baculum: Fix add to translation static texts on the api default page
 - baculum: Fix missing session start
 - Make verify job log same as other logs -- fixes bug #2328
 - Take a more conservative approach for setting killable true
 - Add extra safety for readdir buffer

31Oct17
 - Retab systemd/Makefile.in
 - Don't require mount for @piddir@
 - Use Debian systemd start/stop scripts supplied by Sven Hartge

29Oct17
 - Fix bug #2316 add CacheRetention to Pool
 - Skip tape ioctls on FreeBSD when using a FIFO fixes bug #2324
 - Fix bug #2338 to not truncate already truncated volumes
 - Remove some old C int code and use bool

28Oct17
 - Remove unused lib/lz4.c.orig file
 - Update AUTHORS file
 - Mark Volume read-only only if no access rights or read-only partition
 - Add -P daemon option to supress creating PID file
 - Fix too big copy to test FD plugin_ctx

26Oct17
 - Backport Enterprise code

23Oct17
 - When read-only volume found mark it in catalog -- fixes bug #2337
 - Make out of space on partition fatal
 - Fix bug 2323 -- loop exit condition was backward and add error message
 - Add missing copy-plugin-confs for regress
 - Fix bug reported by jesper@schmitz.computer where bat hangs on FreeBSD

08Oct17
 - baculum: Fix reading and writing schedule resource

15Sep17
 - baculum: Fix undefined offset error during saving director config
 - baculum: Fix listing days of week in schedule setting

14Sep17
 - baculum: Fix saving schedule run directive value

12Sep17
 - rpm: Add missing script baculabackupreport and query.sql for Suse
 - rpm: Add missing libbacsd* file and tapealert script to Suse rpm spec file
 - rpm: Add missing libs bbconsjson, bdirjson and bsdjson to Suse rpm spec 
  file
 - rpm: Add aligned plugin rpm spec file for Suse
 - rpm: Add bacula-tray-monitor.desktop launcher in scripts directory
 - rpm: Add Suse Linux ES 12.1 platform

11Sep17
 - rpm: Add bacula-tray-monitor.desktop file in script dir

Bugs fixed/closed since last release:
2314 2316 2318 2324 2328 2337 2338

=================================================================
Release 9.0.4
This is a minor bug fix release. The main fix in this release
is to allow SQLite3 to work.

Please note: SQLite3 has been depreciated for a long time. If the
community will step forward (as it did in this case) and prepare
the appropriate make_sqlite3_tables and update_sqlite3_tables files,
we can continue to leave the SQLite3 code in Bacula.  However, we
strongly urge users to update to MySQL, MariaDB, and PostgreSQL,
which are our supported SQL databases.

06Sep17
 - Update po files
 - Fix SQLite3 upgrade tables script fixes bug #2306
 - baculum: Fix language setting in config file
 - Upgrade to latest lz4.c to fix bug #2310 bus error on 64 bit Solaris
 - Recompile configure.in
 - Ensure systemd/bacula.conf is created by configure fixed bug #2307
 - Fix compiler warning noted in bug #2309
 - Fix SQLite3 Version bug #2305
 - Remove unused variable to elimiate compiler warning
 - Recompile configure.in
 - Fix #2925 Do not try to stop non backup jobs (virtualfull, copy, migration, 
  restore, etc...)
 - baculum: Fix broken symbolic links for lang files
 - don't use add_event() when flag "l" is not set
 - core: bwlimit measure bandwidth
 - core: bwlimit handle backlog and allow burst
 - Do not purge running jobs in autoprune

Bugs fixed/closed since last release:
2305 2306 2307 2309 2310 2925

==================================================================
Release 9.0.3

This is a minor bug fix release.

08Aug17
 - baculum: Fix access denied error on api install wizard page
 - baculum: Remove assigning to api host when user is deleted
 - baculum: Fix empty admin setting
 - baculum: Add ability to assign host to specific user
 - baculum: Fix bconsole test connection for new api host that works with new 
   director
 - baculum: Fix sqlite db support
 - Fix bug #2301 Solaris Available space incorrectly reported by turning off the 
   output for Solaris
 - Fix bug #2300 mount/unmount/release of single tape drive does not work
 - baculum: Fix bconsole connection test in config wizard
 - baculum: Fix writing config for schedule and message names with space
 - bpipe: Fix compiler warning
 - baculum: Fix drag & drop file version elements
 - baculum: Add fileset info endpoint and use it in restore wizard
 - baculum: Use client name instead of clientid and start using fileset to 
   prepare restore tree
 - baculum: Remove fileset parameter from run restore
 - baculum: Fix lstat regex pattern
 - baculum: Get the most recent jobs by client and fileset or by clientid and 
   filesetid
 - Fix: bug #3048: jobs are stuck in endless loop in reserve.c
 - Add total time to test.out file
 - baculum: Add restore job selection in restore job wizard
 - Enhance verify job report from bug 2249

Bugs fixed/closed since last release:
2300 2301 3048


===============================================================

This is a minor bug fix release, but a few of the bugs are important.
The main items fixed are:

- Postgresql should now work with Postgresql prior to 9.0
  Note: the ssl connection feature added in 9.0 is not available on
  postgresql servers older than 9.0 (it needs the new connection API).
- The issues with MariaDB (reconnect variable) are now fixed
- The problem of the btape "test" command finding a wrong number
  of files in the append test was a bug.  It is now fixed.  It is
  unlikely that it affected anything but btape.
- The bacula-tray-monitor.deskop script is released in the scripts
  directory.
- We recommend that you build with libz and lzo library support (the
  developer packages must be installed when building, and the shared 
  object libraries must be installed at run time).  However we have
  modified the code so that Bacula *should* build and run with either
  or both libz or lzo absent.

23Jul17
 - Use Bacula in place of Libz variables so we can build with/without
   libz and lzo
 - Apply ideas from bug #2255 prettier status slots output
 - Configure and install bacula-tray-monitor.desktop
 - Fix btape test which counted files incorrectly on EOT
 - Fix bug #2296 where Bacula would not compile with postgres 8 or older
 - Fix bug #2294 Bacula does not build with MariaDB 10.2
 - baculum: Fix multiple directors support
 - baculum: Fix showing errors from the API

Bugs fixed/closed since last release:
2255 2294 2296


==================================================================

Release 9.0.1 12Jul17:

This is a minor bug fix release that mainly to include the new
tray-monitor files that were omitted. The tray-monitor now builds
and runs at least on Ubuntu Linux.

12Jul17
 - Remove two incorrect trailing commas in bsock.h
 - Fix bug #2293 bad big endian detection in lz4.c
 - Add new tray-monitor files that were omitted in the backport from Enterprise
 - bvfs: Do not insert deleted directories in PathVisibility table
 - Fix compilation for Debian Stretch with GCC 6.3

Bugs fixed/closed since last release:
2293

========

This is either the biggest Bacula release ever made or one of the
biggest ones. Even without the new Aligned Volumes source code, which
is substantial, there are over 400,000 lines of diff output between
Release 7.4.7 and the release of 9.0.0

This is a major new release with a new version number. It has been
very thoroughly tested, but as always, please backup any previous
version and test this version prior to putting it into production.

For the most part the changes were contributed to the Bacula 
project by Bacula Systems SA and myself, but there were a number
of other contributors that I thank.

Database Update
---------------
This version of Bacula requires a database update.  So either you or the
installation process must apply the update_bacula_tables script.  As a
precaution, please do a database dump or run your nightly database backup
prior to running the update script.

Compatibility:
--------------
As always, both the Community Director and Storage daemon(s) must be upgraded
at the same time.  Any File daemon running on the same machine as a Director
or Storage daemon must be of the same version.

Older File Daemons should be compatible with the 9.0.0 Director and Storage
daemons.  There should be no need to upgrade older File Daemons.

Packagers:
---------
There are a good number of new binaries (e.g.  bbconsjson, bdirjson,
bfdjson, and bsdjson) to install; a new tapealert script file that should
be installed; and some new shared objects (e.g.  libbacsd).  The
dvd-handler script has been removed.  Note also to run the
update_bacula_tables script after having dumped the catalog to bring any
existing catalog up to the new version needed for Bacula 9.0.0.

New Features:
-------------
Please see the New Features chapter of the manual for documentation on
the new features.  The new features are currently only in the New Features
chapter and have not yet been integrated into the main chapters of the
manual.

New Features (summary):
-----------------------

 - Major rewrite of the Storage daemon to: put all drivers in class 
   structures, provide better separation of core/driver code, add new 
   drivers (aligned volumes, cloud), simplifies core code, allows loadable
   device drivers much like plugins but which are better integrated into
   the SD.
 - There are a number of new Bacula Systems whitepapers available on
   www.bacula.org, and a few more will be coming in the next few months.
 - New unique message id will be added to every message (designed but
   not yet implemented).

Core Features:
 - Implement a drive usage counter to do round robin drive assignment
 - Enhance functionality of TapeAlert
 - Implement a "Perpetual Virtual Full" feature that creates a Virtual Full backup
   that is updated every day
 - Increase Director's default "Maximum Concurrent Jobs" setting from 1 to 20
 - Add "PluginDirectory" by default in bacula-sd.conf and bacula-fd.conf
 - Add support for terabytes in sizes. Submitted by Wanderlei Huttel.
 - Restore mtime & atime for symlinks
 - New "status network" command to test the connection and the bandwidth
   between a Client and a Storage Daemon
 - New Tape Alert tracking
 - Loadable SD device drivers
 - PostgeSQL SSL connections permitted
 - JobStatistics improved
 - DB update required
 - Autochanger improvements to group Devices
 - Improved .estimate command
 - Comm line compression
 - Separate bxxjson programs for Console, Dir, FD, SD to output .conf contents
   in Json for easier reading with programs
 - Read Only storage devices


Bconsole Features:
 - Add "ExpiresIn" field in list and llist media output
 - Add command to change the priority of a running job (update jobid=xxx priority=yyy)
 - Add level= and jobtype= parameters to the "list jobs" command
 - Add option to bconsole to list and select a specific Console
 - Add shortcut to RunScript console commands. Submitted by Wanderlei Huttel. 
 - Display "IgnoreFileSetChanges" in show fileset command (#2107)
 - Display PrefixLinks in "show job" output
 - Display permission bits in .bvfs_decode
 - Display the Comment field in "llist job" command
 - Add "ActionOnPurge" field to "llist pool" command. Fix #2487
 - Add "long" keyword to list command, ie "list long job". This is 
   essentially an alias fo the "llist" command.
 - Modify the "setbandwidth" limit parameter to accept speed input. ex: limit=10kb/s
 - Modify the "setbandwidth" limit parameter so that the default 
   is no longer kb/s but b/s. 
 - Do not show disabled resources in selection list
 - Fix bconsole readline and "dumb" terminal handling of CTRL-C
 - Add the priority field to the .api 2 job listing output
 - Improved restricted consoles when accessing catalog.
 
Misc Features:
 - New Tray Monitor program
 - Client Initiated Backups
 - Many performance enhancements
 - Bandwidth limitation timing improved
 - Global resource variables are not lost during a reload command
 - Add -w option to btape to specify a working directory
 - Enhance bls -D/-F help message
 - The "list" command now filters the results using the current Console ACLs
 - The WhereACL is now verified after the restore menu


02Jul17
 - Skip verify-data-test if not running Linux
 - Skip lzo-test if lzo not in Bacula
 - Remove double define HAVE_LZO in config.h
 - Add documentation on baculabackupreport to delete_catalog_backup.in
 - Install baculabackupreport and ignore script without .in
 - Recompile configure.in
 - Add Bill's baculabackupreport script
 - Update po files
 - Fix error in FreeBSD during maxtime-test
 - Fix #2853 About character substitution for "virtual full" job level in 
   RunAfterJob
 - Attempt to fix timing problem with console-dotcmd-test on FreeBSD
 - Ensure we have a DIR connection in dequeue_messages
 - Add more debug to regress for FreeBSD failures
 - Fix #2940 Allow specific Director job code in WriteBootstrap directive
 - Fix pragma pack to allow lz4.c work on Solaris and other machines
 - baculum: Fix working logout button
 - A more correct fix for lz4.c on Solaris 10
 - Remove use of #pragma pack in lib/lz4.c for Solaris 10
 - Recompile configure from configure.in
 - Detect Solaris 10
 - Fix bug #2289 version 7.9 not compatible with old FDs -- comm compression
 - Make getmsg.c compatible with old FDs
 - Use one MAX_BLOCK_SIZE and set to 20M
 - rpm: Add Fedora 25 build platform
 - Remove vestiges of crc32_bad -- fixes Solaris build
 - Fix #2890 about segfault in .status command on Redhat 5 32bit
 - Add missing semi-colon in bsys.c
 - baculum: Fix incorrect table name error during restore start
 - Display the correct address in lockdump for db_lock()
 - Fix getmsg to handle additional forms of Progress messages
 - baculum: Fix double assets and runtime symbolic links in baculum-web deb 
   package
 - baculum: Fix missing php-xml dependency in deb metafile
 - baculum: Improve errors handling in API restore pages
 - rpm: Remove libbacsd.la for both Red Hat and Suse
 - rpm: Add missing libs bbconsjson, bdirjson and bsdjson
 - rpm: Fix libstdc++ version in BAT spec file
 - Fix some problems noted by clang
 - baculum: Reorganize run job code
 - baculum: Reorganize estimate job code
 - baculum: Make get method definition not obligatory
 - Make file-span-vol-test portable
 - Attempt to fix deadlock in FreeBSD maxtime-test
 - Do not produce error if MySQL database exists in create_mysql_database
 - rpm: Add missing tapealert script
 - rpm: Add missing libbacsd
 - rpm: Remove dvd-handler script
 - Fix bvfs queries
 - Use FileId in place of Filename
 - Revert "Put FilenameId in .bvfs_lsfiles output"
 - Put FilenameId in .bvfs_lsfiles output
 - Add more debug in src/cats/bvfs.c
 - Fix bvfs_lsdirs and bvfs_lsfiles
 - baculum: Add Japanese language support in deb and rpm packages
 - Add DirectoryACL directive
 - baculum: New Baculum API and Baculum Web
 - Add forking info to LICENSE and LICENSE-FAQ
 - Minor improvement to error message
 - Fix race in steal_device_lock shown in truncate-concurrent-test
 - Apply Marcin's fix for 6th week of the month
 - Add new truncate test
 - Retab Makefile.in in platforms/systemd.in
 - Fix compiler warning
 - Add FD backwards compatibility
 - Fix regression minor scripting problems
 - Fix #2807 about an issue with the show command when using incorrectly JobToVerify 
   directive
 - Fix #2806 about the director service started before the database with systemd
 - Update Dart control files
 - Massive (70,000+ lines) backport of code from Bacula Enterprise 8.8.
   See next line ...
 - Adapt update_bacula_tables scripts for catalog version 15
 - Allow to use Base directive in a JobDefs
 - Add more debug to the bpipe plugin
 - Enhance error message when packets are too big
 - Add '.storage unique' bconsole command
 - Allow to use ".jobs type=!B" to display specific job type
 - Add lockdump storage daemon information
 - Fix #2698 Display loaded driver list in status storage output
 - Fix autochanger unload message that contains sometime an incorrect volume name
 - Fix issue with open_bpipe() function that may flush stdio buffer if the 
   command is incorrect
 - Fix unload tape messages to print correct volume + improve output format
 - Fix unload/re-load same volume
 - Fix DIR get unexpected "Connection reset by peer" for FD
 - Fix #2548 about SQL connection leak with RunScript::Console commands
 - Fix #2588 about segfault in bdirjson with JobDefs/Base directive
 - Fix #2593 about incomplete jobs incorrectly rescheduled
 - Fix #2629 about pool argument not listed in the "help cloud" output
 - Fix #2632 about VolType not set correctly for Cloud volumes after a label problem
 - Fix #2640 about a reference to the source directory in query.sql file
 - Fix bug #2271 where poll interval causes tape mount message to repeat
 - Fix segfault in bdirjson with incorrect configuration files

Bugs fixed/closed since last release:
2271 2548 2563 2567 2588 2593 2602 2624 2625 2627 2629 2632 2638 2640 2646
2698 2520 2559 2561 2582 2806 2807 2890 2289 2890 2853 2940

======================================================================
=======================================================================

Release Version 7.4.7

This is a minor bug fix release, which hopefully corrects a seg fault
on OpenBSD due to the new ACL/XATTR code, and it also fixes most build
problems on Solaris 10 as well as EPROTO on OpenBSD.

There is one minor new feature that allows you to specify the query
item number on the bconsole query command line.

15Mar17
 - Permit specifying query item number on bconsole query command line
 - Fix Solaris 10 problems reported by Phil Stracchino
 - Fix EPROTO on OpenBSD

=====================================================

Release Version 7.4.6

This is a bug fix release, which hopefully corrects a seg fault on OpenBSD
due to the new ACL/XATTR code, and it also fixes the large number of tape
mount messages that are repeated at 5 minute intervals due to a bug in the
poll code. Various small fixes for FreeBSD.

Please note, the signature hash files (.sig) for the source code was
previously SHA1.  For this and future releases we have changed it to be
SHA256.

10Mar17
 - Fix bug #2271 where poll interval causes tape mount message to repeat
 - Attempt to fix IPV6 not configured
 - Possible fix for acl seg fault on OpenBSD where no acl code defined
 - Change release digest from SHA1 to SHA256
 - Fix getnameinfo() for FreeBSD fixes bug #2083

Bugs fixed/closed since last release:
2083 2271

=====================================================

Release version 7.4.5

This is a minor bug fix plus a significant total rewrite of the
ACL and XATTR code by Radoslaw Korzeniewski.

07Feb17
 - Correct wrong word in message
 - Remove restriction on using the scratch pool that can 
   cause restore failures
 - Remove debug code that breaks btape fill
 - Initialize freespace_mutex fixes bug 2207
 - baculum: Update AUTHORS file
 - baculum: Enable Japanese language on web interface
 - baculum: Implement Japanese language support
 - XACL - refactoring an ACL and XATTR codes.
 - Revert "Warn of Storage Daemon version incompatibility if 
   label fails. Bug #2193"
 - Make another attempt to resolve bug #2176
 - Warn of Storage Daemon version incompatibility if label fails. Bug #2193
 - Apply patch to list more pool info from bug #2202
 - Fix status alignment output reported by Wanderlei Huttel



Release version 7.4.4

This is a bug fix release.

20Sep16
 - Fix #2085 About director segfault in cram-md5 function
 - Attempt to fix bug #2237
 - Recompile configure.in
 - Fix systemd installation
 - If using readline reset terminal at bconsole exit
 - Fix compilation without SMARTALLOC
 - Fix #2060 about SQL false error message with "update volume fromallpools" 
   command
 - Fix spurious MD5 update errors when nothing changed should fix bug #2237 and 
   others
 - Fix small memory leak with the restart command
 - baculum: Update language files
 - Fix #335 Avoid backups going to the scratch pool
 - systemd: Give 3mins to the bacula-sd service to stop and close the dde
 - Minor modifications to Ubuntu packaging
 - Check if the ScratchPool points to the current Pool and print a warning 
   message in such case
 - Fix #1968 print the ScratchPool name instead of just 'Scratch'
 - Display PrefixLinks in "show job" output
 - Add explicit LL to big integers to appease older compilers
 - Enable the plugin directory for the FileDaemon by default
 - Allow multiple mailcommand+operatorcommand in Messages. Fixes bug #2222
 - Handle NULL pointers in smartdump() and asciidump()
 - Modify status to include Admin and Restore in Level field -- clearer
 - Ensure that zero JobMedias are written for labelling
 - Fix error message about the stream 26 (PLUGIN_NAME) in bextract

Bugs fixed/closed since last release:
1968 2060 2085 2222 2237 335



Release version 7.4.3

This is a bug fix release. Most importantly, it fixes the new
GCC 6.0 aggressive compiler behavior that elides (deletes) code 
written by the Bacula developers.  There is no benefit to the
new GCC agressive optimization and it breaks a lot of programs
including Bacula.  This problem showed up on ArchLinux and Fedora 24.

17Jul16
 - Add LICENSE and LICENSE-FOSS files to the documentation
 - Add shortcut to RunScript console commands. Submitted by Wanderlei Huttel. 
   Fixes bug #2224
 - Fail when multiple mailcommand and other strings are specified in .conf. Fixes 
   bug #2222
 - Add support for terabytes in sizes. Submitted by Wanderlei Huttel. Fixes bug 
   #2223
 - Add error message for truncate command when actiononpurge not set. Fixes bug 
   #2221
 - Fix optimization error with GCC 6.1
 - Fix compilation warnings with GCC 6.1
 - Explicitly create MySQL user in grant_mysql_privileges.in

Bugs fixed/closed since last release:
2221 2222 2223 2224

New feature:
  - There are two new Director directives that simplify doing
    console commands rather than using RunScripts.  They are
      ConsoleRunBeforeJob = "console-command"
      ConsoleRunAfterJob = "console-command"


===========================================================

Release version 7.4.2

This is an important bug fix release to version 7.4.1 mainly
fixes detection of MySQL 5.7 (as found in Ubuntu 16.04).  Certain bug
fixes contributed by Bacula Systems.

06Jul16
 - Fix #1926 about wrong duplicate job detection with Copy/Migration and
   Backup jobs
 - Recompile configure after db.m4 change
 - Fix batch insert for MySQL 5.7
 - Fix zero level debug output -- now at 100
 - Fix #766 about Job logs displayed with unneeded linefeed
 - Fix #1902 about a segfault with the "cancel inactive" command
 - Fix bug where MySQL 5.7 is improperly linked on Ubuntu 16.04

Bugs fixed/closed since last release:
1902 1926 766


=================================================

Release version 7.4.1

This is a minor bug fix release to version 7.4.0.  Most of the
fixes have been kindly contributed by Bacula Systems SA.

31May16
 - Fix bug #1849 MySQL does not accept 0 for DATETIME default
 - Modify the alist object to be reused after a destroy()
 - baculum: Fix setting invalid timezone value for PHP
 - Fix compilation for AIX
 - Fix the restore termination string in the job report to take in account 
   JobErrors and SDErrors
 - baculum: Show jobs for client
 - Fix bconsole "llist job=<xxxx>" output
 - Fix #146 about update volume command line usage
 - bat: Fix #1066 about bad update pool command
 - Fix #1653 about make_catalog_backup default user name
 - baculum: Show jobs stored on volume
 - Fix update Volume=x Slot=nn when Slot > MaxVols
 - Set exit code for create_postgresql_database.in
 - Fix bug #2197 -- build failure with --disable-libtool
 - Fix bug #2204 -- superfluous END-OF-DATA in update_mysql_tables.in
 - Convert a Migration job with errors into a Copy job
 - Remove exporting add_mtab_item -- fixes bug #2198
 - Fix possible problem of show multiple resources
 - Comment out tools/smtp-orig.c as it is for reference only

Bugs fixed/closed since last release:
1066 146 1653 1849 2197 2198 2204

=======================
Release version 7.4.0

For the most part the changes were contributed to the Bacula 
project by Bacula Systems SA.

This is a new release with a new version number. It has been
very thoroughly tested, but as always, the new features may not
always work as expected.

The Catalog database format has not changed since version the
prior release (7.2.0).

Compatibility:
--------------
As always, both the Community Director and Storage daemon(s) must be upgraded
at the same time.  Any File daemon running on the same machine as a Director
or Storage daemon must be of the same version.

Older File Daemons should be compatible with the 7.4.0 Director and Storage
daemons.  There should be no need to upgrade older File Daemons.

New features and changes:
Please see the New Features chapter of the manual for documentation on
the new features.  The new features are currently only in the New Features
chapter and have not yet been integrated into the main chapters of the
manual.

New Features and changes summary:
- Support for KFREEBSD OS
- Improved support for Clang
- Configure SSL connection to MySQL
- New chio-changer-freebase in examples/autochangers
  New directives in bacula-dir.conf in Catalog{} resource
     for the MySQL backend (not currently implemented for
     Postgresql or SQLite).
   dbsslkey
   dbsslcert
   dbsslca
   dbsslcapath
   dbsslcipher
- examples/autochangers/rc-chio-changer removed
- examples/devices/DVD.conf removed
- updated copyrights
- Add "Expires in" to list and llist volumes
- Implement a more efficient Volume selection algorithm between DIR and SD
- Implement new list/llist command keywords:
   order=asc|ascending
   order=desc|descending
   limit=nn
   jobstatus=
   Client=
   JobErrors
- Implement new bconsole @tall command that outputs input and
  output to console and terminal.  Note, this also outputs 
  bconsole input commands.
- Implement MaxVirtualFullInterval
- Implement VirtualFullPool override
- Pool overrides work better
- Automatic selection of catalog from client where possible.
- Implement VerifyData level type for Verify jobs.


More detailed changes:

14Jan16
 - Implement MaxVirtualFullInterval
 - Update AUTHORS
 - Ensure relabel has latest vol info may fix bug #1412
 - Change license as per agreement with FSFE
 - Apply Carsten's patch that fixes bug #2192 builds on kfreebsd
 - baculum: Enable Portuguese language on web interface
 - baculum: Implement Portuguese language support
 - baculum: Assign Baculum copyright to Kern Sibbald
 - baculum: Fix sorting in restore by group most recent backups
 - baculum: Fix restore group most recent backups for MySQL
 - Fix FD DisableCommands
 - baculum: Fix to change user password
 - Add ExpiresIn field in list and llist media output
 - Fix #1548 about Solaris SIGBUS with accurate mode backup
 - Backport more Enterprise code to sql_list.c
 - Add info message of #jobs consolidated in Virtual Full
 - baculum: Unify user validation
 - Add HasBase+Comment to llist Jobs
 - Fix seg fault in btape fixes bug #2180
 - Fix slight error in autoprune -- should fix bug #2151
 - baculum: Add first unit tests
 - Fix #1545 about fix in manual_prune.pl script with large number of volumes
 - Fix false status output. Fixes bug #2103
 - Integrate patch into latest version, which fixes bug #1882
 - Fix bug #2090 correct detection of GCC
 - Fix CLANG warning messages -- fixes bug #2090
 - Add new chio-changer-freebase from bug #2115
 - Applied modified patch from bug#2117 to fix bpipe end of stream
 - Apply patch from bug #2165 to fix the update sqlite3 script
 - Fix update MD5 failure bug reported by Peter Keller
 - baculum: Add dashboard panel
 - Patch to add MySQL ssl access
 - Manually apply patch in bug #2156 to allow building on KFreeBSD
 - Fix bug #2153 with patch submitted by Ana Arruda
 - baculum: Switch to started job status just after job start
 - baculum: Add possibility to open configuration windows from URL
 - Fix restore when storage specified on command line
 - Fix restore of Windows streams to non-Windows machines
 - Implement level=Data to the Verify job
 - Fix #1524 about bextract trace file location
 - Fix truncate bug free_volume problem
 - baculum: Remember sort order for data grids
 - baculum: Improve size formatter precision
 - baculum: Fix jobs count in job list
 - baculum: Add jobbytes and jobfiles columns in job list
 - baculum: Get system timezone for PHP if possible
 - baculum: Fix restore when a lot of jobids given
 - baculum: Set default job attributes (level, client, fileset, pool, storage, 
  priority) in Run job panel
 - Fix truncate race bug #1382
 - baculum: Fix update pool action when no volumes in pool
 - baculum: Split configuration windows into two tabs: actions and console
 - baculum: Change default elements limit to 500 elements
 - baculum: Add drive parameter to bconsole release command execution
 - Fix #1470 Fix setdebug command when all components are selected
 - baculum: Fix expectation failed error during restore
 - Add new JOB_DBR field
 - #ifdef out bpluginfo since it does not compile
 - Fix #1449 about a FileDaemon segfault with the fstype option
 - Remove vestiges of rechdr_queue hopefully fixes bug #2180
 - Apply bconsole manpage patch from bug #2182
 - Apply ppc64el configure detection patch from bug #2183
 - Fix #1414 When the FD is down, status dir now prints "is waiting for Client 
  xx-fd"
 - Implement new options in list command
 - Add @tall command to log both input/output in a log file
 - Fix #1360 about bextract -t not documented in the man page
 - Update spec file for latest OSX versions
 - Fix compilation on MacOS
 - Improve Jmsg in response(), display SIGNAL number when appropriate
 - Avoid segfault in dump_block() when the block_len is invalid
 - Fix #1368 about xattr error not displayed correctly at restore time
 - Fix bug 2173 QT tray monitor can not be built due to missing files in configure
 - Move plugin_free() in free_jcr()
 - Fix bug #2083 -- Fix sockaddr_to_ascii for FreeBSD
 - Fix fadvise bug found by Robert Heinzmann
 - Fix compilation without zlib and lzo
 - Fix compilation error with new fstype_cmp() function
 - Fix compilation problem with AFS
 - Fix compilation on Solaris/FreeBSD
 - Fix segfault in open_bpipe() when the program is empty
 - Modify find_next_volume_for_append() to not send the same volume twice
 - Avoid <NULL> string displayed in restore menu
 - Do not update state file after a bacula-xxx -t
 - Fix #804 about misleading message with the purge command
 - Fix automount feature after a label command
 - Reinsert tabs in systemd Makefile.in
 - baculum: Provide LICENSE-FOSS file content in Baculum deb packages (copyright 
  file)
 - Use Client Catalog resource in get_catalog_resource() if "client" is specified 
  in command line
 - Fix #1131 about Job::Next Pool resource precedence over the Pool::Next pool 
  directive
 - Fix #898 truncate volumes larger than 200 bytes

Bugs fixed/closed since last release:
1131 1360 1362 1368 1382 1412 1414 1449 1470 1524 1545 1548 1882 2083 2090
2103 2115 2117 2151 2153 2156 2165 2180 2182 2183 2192 804 898



================================================================
Release version 7.2.0

Bacula code: Total files = 733 Total lines = 303,426
The diff between Bacula 7.0.6 and Bacula 7.2.0 is 254,442
which represents very large change, for the most part 
contributed to the Bacula project by Bacula Systems SA.

This is a major new release with many new features and a
number of changes. Please take care to test this code carefully
before putting it into production.  Although the new features
have been tested, they have not run in a production environment.

============== !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ===================
New Catalog format in version 7.2.0 and greater
-----------------------------------------------
This release of Bacula uses a new catalog format.  We provide a script
(update_bacula_tables in bacula/src/cats and in bacula/updatedb) that
will update from Bacula 3.x, 5.2, or 7.0 to version 7.2.0 format.
The database upgrade is fast and simply.  As always we strongly 
recommand that you make a dump of your database prior to doing the
upgrade.

NOTE: The upgrade will work only for PostgreSQL and MySQL. Upgrading is
not (yet) supported for SQLite3.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!


For packagers, if you change options, naming, and the way 
we link our shared object files, as at least one of you does,
you are creating a situation where the user may not be able
to run multiple versions of Bacula on the same machine, which
is often very useful, and in addition, you create a configuration
that the project cannot properly support.

Please note that the documentation has significantly changed.
You will need additional packages to build it such as inkscape.
Please see the README and README.pct files in the docs directory.
The packages come with pre-build English pdf and html files,
which are located in the docs/docs/manuals/en/pdf-and-html directory.

Packagers: please note that the Bacula LICENSE has changed, it is still
AGPLv3 and still open source. A new requirement has been added which
requires other projects using the source to keep the acreditations.

Packagers: please note that the docs license has changed. It is now 
licensed: Creative Commons Attribution-ShareAlike 4.0 International
This is a common open source license.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Compatibility:
--------------
As always, both the Community Director and Storage daemon(s) must be upgraded
at the same time.  Any File daemon running on the same machine as a Director
or Storage daemon must be of the same version.

Older File Daemons should be compatible with the 7.2.0 Director and Storage
daemons.  There should be no need to upgrade older File Daemons. However,
this has not been fully tested yet.  Since we expect some problems, please 
test before putting it into production.

New Features:
Please see the New Features chapter of the manual for documentation on
the new features.  The new features are currently only in the New Features
chapter and have not yet been integrated into the main chapters of the
manual.  Also, since there were so many new features, it is possible that
a few that previously existed in version 7.0.x are documented a second
time in the 7.2.0 new features section.

More detailed changes:

12Aug15
 - Put back missing close_msg(NULL) to flush daemon messages at job end
 - Add LICENSE-FOSS and update LICENSE for baculum
 - Backport from Bacula Enterprise
29Jul15
 - Fix max vol size test accidently deleted
 - Remove gigaslam and grow on uninstall -- from bug report
 - Revert to Branch-8.3 fd_snapshot.c
 - Pull more recent changes from Branch-8.2
 - Fix bvfs_lsdir pattern parameter setting
 - Remove CheckList nolonger used
 - Revert "Use db_lock()/unlock() around JobMedia creation transaction"
 - Fix #1099 about director crash with rescheduled jobs
 - Fix #1209 about bat segfault when clicking on Media
 - Qmsg(M_FATAL) set jcr->JobStatus to JS_FatalError immediately
 - snapshot: Abort the job by default if a snapshot creation fails
 - Revert to old SD-FD close session protocol
 - Remove drive reservation if no Jobs running
 - Remove filename patch
 - snapshot: Try to detect LVM when the filesystem is ext3 or XFS
 - Fix bad debug message in mac_sql.c
 - Fix restore-multi-session test by incrementing found files only on next 
   file
 - Add -T description in man pages
 - Correct incorrect Fatal error message text in bsock
 - mysql: Add support for multiple instances binary backup in the same fileset
 - Fix compilation with new debug hook
 - mysql: Avoid warning with abort_on_job plugin option
 - Fix compilation after patch "prune volume yes"
 - Do not print message about retention when using "prune volume yes" command
 - Fix #536 about Copy/Migration/VF that should not use Client "Maximum Concurrent 
   Jobs"
 - Fix potential segfault with unused ConfigFile objects
 - Fix #1108 Enhance setdebug help command and console completion
 - Add more JCR variables in lockdump procedure
 - Fix error in update_postgresql_tables.in caused by bad search and replace
 - Fix #1127 about the repositioning enhancement during restore
 - Correct try_reposition() return code after a seek()
 - Add position information in the block structure
 - Fix a number of acl and xattr bugs + give more understandable variable 
   names
 - Make btraceback.dbx and .gdb use new sql engine name
 - Revert most of patch ef57e6c4 and replace with old cats code
 - Revert useless parts of patch 08d8e2d29
 - Revert patch d7f71d2c94a and rewrite it using simpler public domain example
 - Fix batch mode detection for SQLite3
 - Revert d9aa76fa and simplify
 - Revert patch 30388e447fa3 + fix bug #1948
 - Use a more appropriate name for the acl context
 - Use class pointer rather than jcr in src/lib/jcr.c
 - Revert patch f294b276
 - Change B_DB to BDB to correspond to naming convention
 - Add -T option in bacula-sd to use trace file
 - Force use of newer TLS protocols
 - Avoid problem with db_get_job_record() when SchedTime or RealEndTime is 
   NULL
 - Update our regexec() to support NULL argument
 - Add function to copy a file in bsys.c
 - Fix bug 2141 fork before TLS initialization
 - Update LICENSE-FOSS
 - Change license on src/lib/crc32.c as agreed with the author, Joakim Tjernlund
 - Update po
 - More license updates
 - Fix compilation
 - Add read_control command between Plugin/FD and Storage Daemon
 - Add .bvfs_get_jobs and .bvfs_get_bootstrap functions
 - Fix compilation for Solaris9
 - Fix Makefile.in tabs
 - Update Windows .def files
 - More copyright notices
 - Fix Windows plugin licenses
 - Change license copyright for updatedb and qt-console/tray-monitor
 - Change copyright for logwatch
 - Update more copyrights
 - Update copyrights in pebuilder
 - Update plugin licenses
 - Add copyrights + license to platforms
 - Update copyrights in po
 - More license clarifications
 - One more copyright in src/cats
 - Update src/cats .in file copyrights
 - Compute Job "Compression Ratio" using SDJobBytes instead of JobBytes
 - Get correct attributions for bsmtp.c
 - Switch from LGPLv3 for scripts to BSD 2-Clause
 - Fix segfault on dot commands used in RunScript::Console directive
 - Fix patch c0f0e6c01c7 to optimize retries only for autochangers
 - Fix #876 about SD reads too far with complex bootstrap
 - Correct unmount test in dev.c
 - Add debug JobId in next-vol-test script
 - Fix patch c59e5da29 to not orphan buffers
 - Fix bad implementation of enable/disable job,client,schedules + implement 
   enable/disable storage devices
 - Implement enable/disable schedule and client
 - Optimize Volume protocol when Volume not InChanger
 - Do not trash existing record during label of new volume
 - During accurate restore unstrip as soon as possible
 - Better handline of no storage device found
 - Fix #1075 The replace=never flag was not properly handled when combined with 
   database= option in mysql/postgresql plugin
 - display timestamp in X_msg() in one single pass to avoid double flush()
 - Update copyrights in scripts directory
 - Fix bug #1083 RT14512
 - configure.in: new HAVE_FCNTL_LOCK detect fcntl() locking capability
 - Fix #1008 about status storage that displays "Writing" and "Reading" information 
   for the same DCR
 - Add new %E job code to use non fatal job errors in scripts
 - Revert to old htable, but add 64 bit hash
 - Fix possible race condition in smartalloc
 - Refactor + optimize fstype.c + revert mntent_cache.c/h
 - snap: Fix small initialization problem with LVM backend
 - Fix compilation warning in bextract
 - lock the pid file using fcntl(F_SETLK)
 - bat: Fix segfault in client view when the Uname field is empty
 - bat: Fix #1047 about segfaults in Client, Media and Pool view
 - Revert patch 62ab7eb5 for filed/backup.c
 - Revert patch 62ab7eb5 for filed/verify.c
 - Refactor mount/unmount to use class calls
 - Add return status to DEVICE:close and report error at end of Job
 - Fix seg fault
 - fix a Dmsg in match_bsr.c:match_volume()
 - Fix #861 about bad help command on status schedule
 - Add new cats header file
 - Refactor DB engine to be class based
 - Remove regression cancel_test from do_all
 - Fix invalid .mod command in BAT during restore (bugfix #858)
 - Use B_ISXDIGIT() in rangescanner
 - Handle hex numbers in str_to_uint64()
 - Fix prune-migration-test -- wait in wrong place
 - fix MA 987 cannot copy/migrate jobs with a Level=VF in the job resource
 - Fix basejob error caused by patch on bug #965
 - Allow to list restore jobs in llist jobid= command
 - Fix #940 about segfault in bat when doing an "update slots"
 - Fix #983 about segfault on win32 filedaemon when using bat to monitor the 
   status
 - Fix #969 about a segfault while doing a cancel of a copy job
 - Fill errmsg after an error with FETCH query in db_big_sql_query()
 - Fix #965 about an empty error message after a problem when sending accurate 
   file list
 - Fix #972 about segfault in show command used with multiple resources
 - Work bsnapshot for SLES12 and fix issue with ZFS
 - Fix small memory leak in cancel command with ujobid and job parameters
 - Ensure that client resource is not freed during setbandwidth command
 - fix errors in the use of a Mmsg()
 - Use a specific mutex for auth instead of jcr->mutex
 - update po
 - Add missing call to free_jcr() in previous patch
 - Lock the jcr when using sd_calls_client_bsock variable
 - Ensure that only one thread can use the auth code in the Storage
 - Fix #951 about SDCallsClient not used during restore jobs
 - snapshot: Get the creation date from the zfs list snapshot command
 - snapshot: Fix small issue with Name parameter in list snapshot
 - Fix bsnapshot to return status=0 on error
 - fix a mempool error at SD shutdown
 - snapshot: Call support() only if the device is in the fileset
 - snapshot: Avoid double / in path and files when volume is /
 - Fix segfault with Console runscript introduced by "Stop ua commands if comm 
   line drops"
 - handle ctrl-C and SIGTERM the same way in SD
 - Startup scripts return proper exitcode for service restart action
 - Implement tables configuration
 - Add ReadBytes to FD status output
 - Accept 0/1 for @BOOL@ type in ConfigFile module
 - Set cmd_plugin only in pluginCreateFile if not SKIP/ERROR/CORE
 - Fix #13680 about systemd message "unknown lvalue"
 - Stop ua commands if comm line drops
 - Fix weird compilation problem on rhel5
 - Display TLS information in status client/storage
 - Fix rpms where unix user were not properly defined
 - update extrajs package in debs/rpm package
 - Fix segfault with new filesetcmd
 - snapshot: Reset JobId in Snapshot table when deleting a job
 - snapshot: Add ability to list snapshots from the FD
 - snapshot: Add a confirmation message when pruning snapshots
 - Add RunScript AfterSnapshot event
 - Fix #431 About upon upgrade, RPMs resets group membership
 - snapshot: Display bsnapshot error message if possible
 - Fix jobmedia-bug3
 - Set error code in return from run regress script
 - snapshot: More work on LVM backend and on list/sync commands
 - snapshot: Add EnableSnapshot directive in fileset
 - snapshot: Add errmsg and status to SNAPSHOT_DBR
 - snapshot: Send SnapshotRetention parameter to the Client and work on the 
   prune command
 - Add bacula-snapshot.spec
 - Add disabled=yes/no in bsnapshot.conf
 - Fix #875 about bvfs repeats the same output many times
 - Revert "Storing the result in a local variable from sql_num_fields saves us a 
   lot of callbacks."
 - Remove passing args to cats driver class initialization
 - Simplify cats by eliminating the B_DB_PRIV class
 - Convert more db funcs to class calls
 - Add Snapshot Engine to bacula core
 - Change more db calls into class calls
 - Add files missed in last commit
 - Convert db_lock/unlock to be called via class
 - Fix small memory leak
 - Remove more vestages of Ingres
 - Fix #843 about "show storage" option missing in the help command output
 - Use bzip2 for sles dependency
 - Avoid warning with uninitialized variables
 - update "help status"
 - Revert "Small fix to Eric great patch for readline commandcompletion so it 
   also compiles on non gcc compilers."
 - Separate out definitions into new header
 - Remove bad restore.h
 - Revert "Move restore struct defintions to seperate include file. Small change 
   to acl.h and xattr.h to use define inline with other header files."
 - Revert "Fix MediaView::getSelection"
 - Bat: ensure sufficient rows to display drives in storage display
 - new MmsgDx() macro that combine Mmsg(errmsg, fmt, ...) and Dmsg in once
 - add a ASEERTD() for DEVELOPPER
 - Fix wrong KiB value
 - Revert "Fix bug #1934 Wrong values at media list in BAT"
 - Change bplugin_list to b_plugin_list which is more appropriate
 - Remove Ingres related unused files
 - Simplify rwlock coding
 - Make subroutine names clearer
 - Back out useless patches
 - Put back old code prior to excessive edits
 - Remove over complicated acl/xattr code
 - Add license to files without any
 - Fix #805 about nextpool command line argument not properly used
 - Remove recursion from free_bsr() and free_bsr_item() to handle very large 
   BSR
 - Avoid segfault in connect_to_file_daemon() when jcr->client is NULL
 - #776 Volume created in the catalog but not on disk and #464 SD can't read an 
   existing volume
 - Add schedule to show command tab completion
 - Make global my_name hold 127 chars
 - Mark file volumes that are not accessible in Error in mount_next_vol
 - Fix #743 about bat permission conflict on /opt/bacula/etc
 - Add copyright to Makefiles
 - change in lockmgr.c to avoid the report of a memory leak in testls
 - lib: integrate SHA2 into bacula
 - Fix #747 about restore problem failing on "Unexpected cryptographic session 
   data stream
 - Revert previous copyright accidentally changed
 - Fix btape fill command by removing some debug code in empty_block()
 - Add Accurate Fileset option "M" to compare ctime/mtime with the save_time 
   like with normal Incremental
 - Add index on Job(JobTDate) to mysql catalog
 - Fix bad check on bopen_rsrc return status. bug #2106
 - Do not stop the storage daemon startup if the File device is not yet accessible
 - Fix double free in btape
 - Fix failed mount request in btape fill test
 - Avoid ASSERT() when using btape with vtape driver
 - Possible fix for NULL client bug #2105
 - Fix compilation of Nagios check_bacula
 - Add test for restict c99 in autoconf
 - Allow to use device= option in release/mount/unmount command
 - Fix #699 about duplicated job name when starting two jobs at the same time
 - Fix #701 about status schedule missing from tab completion and correct job 
   filter
 - remove autoconf/configre
 - Fix #346 Add ipv6 support for Solaris
 - Fix #692 about compatibility issue with community FD
 - Fix new match_bsr patch
 - Fix #588 Improve SD bsr read performance
 - Fix ownership bug in html-manuals package
 - Add EFS in the client status flag list
 - Implement Win EFS Support
 - Fix QT windows build for 32bit
 - Add SLES113 to spec files
 - Add @encode and sp_decode functions for plugins
 - Fix tls-duplicate-job seg fault + harden pthread_kill() code
 - Update plugin version to ensure 8.0 will not load 6.6 plugins
 - Add JobBytes and ReadBytes to llist jobid= output
 - Rewrite store_drivetype and store_fstype to allow a comma separated list of 
   items
 - Fix #633 about JobDefs MaximumBandwidth Job inheritance
 - Fix possible editing truncation due to 32 bit calculations
 - Remove non-portable -ne in echo
 - update po
 - Add Makefile for mssql-fd plugin
 - Improve error message of open_bpipe() on win32
 - Add jobid= parameter in .status dir running command
 - Add worker states
 - Pull latest worker files from development branch
 - Add comment about incorrect scripting
 - Put Dsm_check() on reasonable debug level
 - Remove auto-generated tray-monitor.pro.mingwxx file
 - Display message about MaximumBlockSize default value only if a value was 
   specified
 - fix solaris : replace be64toh() by unserial_uint64()
 - update SD <-> SD capabilities exchange
 - Handle RestoreObjects with Copy/Migration jobs
 - Add free list to worker class
 - Fix bad caps with SDcallsClient + debug + fix seg fault on connection error
 - Implement blowup=nn for FD and hangup+blowup for SD
 - Correct bat copyright
 - Change sizeof expressions to be more standard
 - Remove regress trap that causes sd-sd-test to fail
 - Dmsg was not handling tag anymore
 - Fix for SD seg fault while swapping volumes
 - Make bextract able to handle dedup streams
 - Remove unused file
 - Make sure mount_next_read_volume() will cancel the current job
 - Forbid llist command in runscript
 - Fix #295 about query file message
 - Add no_mount_request to DCR
 - Update Windows .def file
 - Add spec file for redhat/suse html manual package
 - Fix bug #2091 bad vtape device definitions
 - Fix bug #2089 compiler warning
 - Make sure level is tag free when printing debug message
 - fix tags in Dmsg
 - Regenerated configure script
 - Remove spaces at the end of lines in Bat file
 - Revert bat.pro.in file
 - Fix recursive echo bug #2088
 - Add new fifo class flist.h/c
 - Allow to create temp DEVICE from DEVRES
 - For bat always use g++
 - Make selection by Volume Name or MediaId a bit clearer
 - Optimize Dmsg() with tags by keeping current tags into a separate variable
 - Make message more understandable


=========================================================================

Bugs fixed in this version:
1099 1209 536 1108 1127 876 1075 1083 1008 1047 861 858 965 940
983 969 965 972 951 13680 431 875 843 1934 805 776 743






================= Old 7.0.x Release ====================================

Release version 7.0.5
This is an important bug fix release to version 7.0.4.  Since it fixes several
major problems.  We recommend that everyone upgrade to this version.

28Jul14
 - Fix #547 by adding .schedule command
 - Update AUTHORS
 - Fix bug #2079 with patch from Robert Oschwald
 - Fix orphaned file descriptors during errors
 - Yet another client==NULL
 - Improve FD and SD cancel
 - Jim Raney's TLS patch
 - Fix bug #1679 pool overrides not shown in manual run display
 - Attempt to avoid client==NULL
 - Fix for bug #2082 (hopefully)
 - Fix seg fault in jobq.c
 - make stop after first error
 - Increase status schedule days from 500 to 3000
 - Remove bad cherry-pick
 - Fix compiler warning
 - Allow options create_postgresql_database from patch in bug #2075 by roos
 - Fix bug #2074 crashes when no conf file present
 - Set pthread id in jcr at beginning so the job can be canceled.
 - Fix possible heartbeat interval timing problems
 - Fix some errors reported by valgrind. May fix the problem with bsmtp command.
 - Ensure b_sterror() is using the correct size of input buffer
 - Fix possible seg fault
 - Fix segfault when trying to stop the bnet_server thread in terminate_stored()
 - Fix bad link bug #2076
 - Fix compilation of bsock.c when TLS is not available
 - Correct L suffix to be LL
 - Fix bad copy/migrate data header
 - On termination shutdown thread server
 - baculum: Updated README file
 - baculum: Update English language texts
 - baculum: Saving auth file for web server HTTP Basic auth
 - baculum: Added directory for web server logs
 - baculum: Added example Lighttpd configuration for Baculum and sample web 
   server auth file
 - Expanded auth error message
 - baculum: Support for web servers which do not provide direct info about HTTP 
   Basic auth
 - Fix limit bandwidth calculation
 - Eliminate strcpy() from bsmtp
 - Fix for configuring sudo option for bconsole access
 - Display correct NextPool overrides + use Job NextPool in restore if available
 - Fix Bacula to work with newer Windows pthreads library
 - Fix bug #180 ERR=success in btape when tape error

Bugs fixed/closed since last release:
1679 180 2074 2075 2076 2079 2082 547


Release version 7.0.4
This is a bug fix release to version 7.0.3.  We recommend that
everyone upgrade to this version.

The main fixes are to make copy/migration to a second SD work, and
to cleanup some of the inconsistencies in the cancel command which 
could confuse the user.

02Jun14
 - Better error handling for cancel command
 - Fix compiler warning + simplify some #ifdefs
 - Fix copy/migration to second SD
 - Fix calls to sl.set_string()
 - Improve sellist code

=============================================================
Release version 7.0.3
This is a bug fix release to version 7.0.2. We recommend that
everyone using version 7.0.2 upgrade to this version.

12May14
 - Fix error handling in do_alist_prompt
 - Tighten error condition handling in sellist
 - Add new cancel test
 - Update LICENSE and LICENSE-FAQ
 - Also update autoconf/aclocal.m4
 - Reschedule on error caused EndTime to be incorrect -- fixes bug #2029
 - Flush console queued job messages -- should fix bug #2054
 - Attempt to fix FreeBSD echo/printf, bug #2048
 - Update to newer libtool + config.guess
 - Recompile configure
 - Apply fix supplied for acl.c in bug #2050
 - Fix a SD seg fault that occurs with over committed drives
 - Clear bvfs cache and set debug options available only for admin
 - Moved auth params to curl opts
 - Filtred single results for restricted consoles
 - Removed unnecessary debug
 - Changed e-mail address in gettext file
 - Support for customized and restricted consoles
 - Misc changes for rpm building (made by Louis)
 - Updated requirements for Baculum
 - Apply fix for bug 2049: wrong drive selected
 - Fix #2047 about bthread_cond_wait_p not declared
 - Fix Bacula bug #2044 -- fix Makefile for bplugininfo linking
 - Fix Bacula bug #2046 -- sellist limited to 10000
 - Fix Bacula bug #2045 -- multiply defined daemon_event
 - Fix Bacula bug #2020 overflow in btape -- Andreas Koch

Bugs fixed/closed since last release:
2020 2029 2044 2045 2046 2047 2048 2050 2054


===================================================================
Release version 7.0.2
This is a minor update since version 7.0.1 that is mostly cleanup.
However, there is one annoying bug concerning shell expansion of
config directory names that is fixed, and there is at least one
syntax error in building the full docs that appears on some systems
that is also fixed.

02Apr14
 - Remove more vestiges of libbacpy
 - Put back @PYTHON@ path in configure
 - Fix improper string in parser
 - Remove libbacpy from rpm spec files
 - Fix linking check_bacula
 - Fix new SD login in check_bacula
 - Tweak docs build process


Release version 7.0.1
This is a minor update since version 7.0.0 that is mostly cleanup.

31Mar14
 - Remove old plugin-test
 - Update po files
 - Enable installation of the bpluginfo utility
 - More tray-monitor updates
 - Add Simone Caronii to AUTHORS
 - Align command line switches in manpages.
 - Apply upgrade to config.guess
 - Remove bgnome-console and bwx-console leftovers.
 - Update tray-monitor header also for new bsock calls
 - Attempt to fix nagios to use new bsock calls
 - Update tray-monitor to new bsock calls

========================================
Release 7.0.0

 Bacula code: Total files = 713 Total lines = 305,722
 The diff between Bacula 5.2.13 and Bacula 7.0.0 is 622,577 lines,
 which represents very large change.

This is a major new release with many new features and a
number of changes. Please take care to test this code carefully
before putting it into production.  Although the new features
have been tested, they have not run in a production environment.

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
For packagers, if you change options, naming, and the way 
we link our shared object files, as at least one of you does,
you are creating a situation where the user may not be able
to run multiple versions of Bacula on the same machine, which
is often very useful, and in addition, you create a configuration
that the project cannot properly support.

Please note that the documentation has significantly changed.
You will need additional packages to build it such as inkscape.
Please see the README and README.pct files in the docs directory.
The packages come with pre-build English pdf and html files,
which are located in the docs/docs/manuals/en/pdf-and-html directory.

Packagers: please note that the Bacula LICENSE has changed, it is still
AGPLv3 and still open source. A new requirement has been added which
requires other projects using the source to keep the acreditations.

Packagers: please note that the docs license has changed. It is now 
licensed: Creative Commons Attribution-ShareAlike 4.0 International
This is a common open source license.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Compatibility:
--------------
As always, both the Director and Storage daemon(s) must be upgraded at
the same time. Any File daemon running on the same machine as a Director
or Storage daemon must be of the same version.

Older File Daemons should be compatible with the 7.0.0 Director and Storage
daemons.  There should be no need to upgrade older File Daemons.

The following are new directives, commands and features:
- New Baculum web GUI interface.  See the gui/baculum directory.
- Directive fdstorageaddress in Client
- Directive SD Calls Client in Client
- Directive Maximum Bandwidth per Job in Client
- Directive FD Storage Address in Storage
- Directive Maximum Spawned Jobs in Job
- setbandwidth command in bconsole
- Progress meter with FD in status dir
- LastDay of month in schedule
- sixth 6th week in month in schedule
- Improvements in bconsole SQL calls
- Allow list and ranges in cancel as well as the keyword: all
- truncate command in bconsole
- prune expired volumes?
- New hardlink performance enhancements
- restart command
- restore optimizespeed=yes|no for hardlinks default yes
- PkiCipher and PkiDigest in FD Client item
 Cipher aes128, aes192, aes256, blowfish
 Digest md5, sha1, sha256
- Maximum Bandwidth Per Job in FD Client resource
- Maximum Bandwidth Per Job in FD Director Resource
- .bvfs_decode_lstat
- DisableCommand in FD Director resource
- DisableCommand in FD Client resource
- status scheduled bconsole command with the following options:
   days=nn (0-500 default 10); limit=nn (0-2000 default 100)
   time=YYYY-MM-DD HH:MM:SS
   schedule=xxx job=xxx
- NextPool in Run override
- Directive NextPool in Job

Please see the New Features chapter of the manual for more
details.

The following features or directives have been removed:
- Win32
- tray-monitor
- wx_console
- Removed cats DBI driver
- Python

Detailed changes:
=================
24Mar14
 - Add Josip Almasi to AUTHORS
 - [PATCH] Support for restricted consoles in BAT config
 - [PATCH] Fix for free director directive
 - [PATCH] Fix auto-select restricted console for director in bconsole
 - Realign output display
 - Update ua_output.c from Branch-6.7
 - Add some missing Branch-6.7 updates
 - Added needed empty directories to Baculum
 - Fix for support PostgreSQL, MySQL and SQLite
 - Framework adjusting to Baculum database connections
 - Framework fix for lower case tables names in MySQL
 - Fix for Baculum SQLite support
 - Initial commit Baculum
 - Add Marcin to AUTHORS file
 - Strip trailing blanks
 - Update copyright year
 - Update LICENSE and header files
 - Remove old file
 - Add new header in misc files
 - Remove tray-monitor bwx-console manual installation
 - Remove FD python and examples
 - Fixup spec files
 - Remove pythonlib from lib
 - Update package-list
 - Fix SDCallsClient daemon synchronization
 - Add debug code + make 127.0.0.1 same as localhost for tls tests
 - Fix multiple DIRs in console
 - Make failure for bat to connect to DIR non-fatal
 - Fix bat style to one that works
 - Take disk-changer from Branch-6.7
 - Simplify Version output
 - Fix FDVersion for SD Calls Client test
 - Update accurate test
 - Update differential test
 - Add new regress timing scripts
 - Improve plugin make clean
 - Implement regress FORCE_SDCALLS
 - Remove win32 tray-monitor and wx-console directories
 - Remove regress-config need only regress-config.in
 - Add configure archivedir
 - Improve SQL failure reporting
 - First cut backport BEE to community
 - Add copyright to mtx-changer.in