Kern;;;20 July 2009 at 14:49 Bacula Version 3.0.2 has been released to Source Forge Note, if you are not already running 3.0.x, read the 3.0.x release notes below. Important!!! Version 3.0.2 is primarily a important bug fix update to version 3.0.1 with some enhancements (see below). Changes since 3.0.1: Bug fixes: 1029, 1285, 1298, 1303, 1304, 1305, 1306, 1307, 1308, 1309, 1311, 1315 1317, 1318, 1323, 1325, 1331, 1333, 1335 Fixed: - Fix problem with the Postgresql driver that sometime displays values - Cleanup old job records when starting the Director - Fix bugs in xattr code - Fix encoding problem with Postgresql - Fix that prevents restore by file selection from using Copy job Enhancements: - Security enhancement for the File Daemon - New directive to specify source address for outgoing connexions - Show volume availability in autochanger when doing restore. This is project 31 in the projects file. - Add accurate=yes/no option to estimate command - Add --with-hostname, --with-bsrdir, --with-logdir to ./configure - Add a restore menu that contructs a full restore when entering a JobId. This is project 2 in the projects file. - Add new Nagios plugin Compatibility: Like always, both the Director and Storage daemon must be upgraded at the same time. Older 3.0.x and possibly 2.4.x File Daemons are compatible with the 3.0.2 Director and Storage daemons. It should be no need to upgrade older File Daemon. ;;;; Kern;;;30 April 2009 at 17:49 Bacula Version 3.0.1 has been released to Source Forge. Note, if you are not already running 3.0.0, please read the 3.0.0 release notes. Important!!! Version 3.0.1 is primarily a minor bug fix update to version 3.0.0 with one enhancement (see below). Changes since 3.0.0: Bug fixes: 1276, 1274, 1275, 1272 1246, 1268, 1281, 1282. Fixed: - Check for job_canceled() in fd_plugin code. - Update Win32 table creation to have new DB version 11 format - Remove illegal Options in Exclude of default Win32/64 bacula-dir.conf - Remove 'Reposition' messages when restoring - Updated projects file - Tweak version string to display versionid field at the end and keep fields order. - Add additional mysql connection debug code submitted by: Chandranshu Enhancement: - Modify insertion of read Volumes in SD to be done *before* the drive reservation. This ensures that a Volume to be read will not be reserved for writing. Significant improvement in eliminating tape deadlock situations. Note, both the Director and Storage daemons must be upgraded at the same time. The 3.0.1 File daemons are compatible with 3.0.0 file daemons and as noted below in the 3.0.0 release notes the Director and Storage daemon should be compatible with 2.4.x File daemons. In general, we do not expect any of the 3.0.x File daemons to work with older Directors and Storage daemons (as has always been the case for Bacula releases). ============ Documentation improvements needed ================== Note!!!!! The 3.0.0+ documentation needs rather extensive modifications in the following areas: 1. Missing documentation. 2. Correction of links within various manuals -- most fail. 3. Integration of the new features into the main documents. 4. Much more. The documentation will not be completed in the near future due to lack manpower. If you are unhappy with this situation as we are, we suggest you help by submitting patches to the documentation. Thanks. ===== ;;; Kern;;;09 April 2009 at 22:30 Bacula Version 3.0.0 has been released to Source Forge. This is to inform you that we have uploaded the Bacula version 3.0.0 source tar files and the Win32/64 installer files to the Bacula Source Forge download location. There are quite a number of new features in this release, and upgrading to it requires a database upgrade, so please read the release notes carefully (included below) and the documentation for the new features at: http://www.bacula.org/manuals/en/concepts/concepts/New_Features.html There is still a good deal of work to do to finish the release process (mainly reorganizing the web site manuals ...), but at least the source files are released. The rpms should follow shortly (probably this weekend). If you are currently using 2.4.4, please note that within a few months that version will no longer be supported, so please consider the possibility of upgrading. This release probably has the most new features that we have ever released, and it has taken a long time to produce it. The basic code is very well tested, and if you stick to 2.4.4 features, you are unlikely to experience problems. However, many of the new features have not been well tested, so your help will be appreciated. The following issues with 3.0.0 are known and we are working on them: 1. The documentation is not 100% complete (there are so many new features that we missed documenting some). 2. All the new documentation is in the New Features chapter, but not all of it has yet been integrated back into the appropriate chapters. 3. James has reported that the Exchange plugin may crash if you cancel a job while it is running. He is working on this. 4. The SD has many new features that will make it more stable. One in particular is that it knows what Volumes will be read during a migration, copy, or Virtual backup job, and will ensure that they are not selected for writing (something easy to do if you are using disk files and the same pool for reading an writing). However, the day after the release was cut, I found a problem with this code that prevents it from working properly during certain pre-allocations of the write tape. 5. There is still an outstanding bug report on VSS failing (it seems to be a bit of a rare case). As I previously announced, we will now make 3.0.0 our main release source code stream, and we hope to release new version every six months and bug fix updates even sooner. To be able to do this, we will support version 2.4.4 only for a few more months. There after the project will only support the most current release ... This release comprises a lot of work by a lot of different people and many contributions. Normally I hesitate to mention particular people or contributions because I always forget someone, but since this was such a big release, I would like to mention at least the big contributions: Sponsor Company(s) - Programmer - Project Bacula Systems - Eric Bollengier - Accurate Backup Bacula Systems - Eric Bollengier - Catalog format enhancements Bacula Systems - Eric Bollengier - bextract non-portable Win32 data Bacula Systems - Eric Bollengier - Win64 File daemon Bacula Systems - Eric Bollengier - SD deadlock detection + postmortum dump Bacula Systems - Eric Bollengier - Faster Attribute despooling if DIR & FD on same machine Bacula Systems - Eric Bollengier - Virtual tape emulation Bacula Systems - Kern Sibbald - USB rescue key Equiinet funded development - James Harper - MS Exchange plugin Personal contributions: Kjetil Torgrim Homme - Regex expressions for restore in bootstrap file Marco van Wieringen - ACL code overhaul Marco van Wieringen - Solaris ZFS/NFSv4 ACL support Marco van Wieringen - Extended Attribute support Marco van Wieringen - Shared Objects Dirk Bartley - Bat speedup + stability improvement + many enhancements Joao Henrique Freitas - libdbi catalog driver Scott Barninger - rpm packaging Kern Sibbald - many big and little projects ... Many people -- see the AUTHORS file. Many thanks to everyone for making Bacula what it is today. === List of new features === - Accurate Backup - Copy Jobs - ACL code overhaul - Solaris ZFS/NFSv4 ACL support - Extended Attribute support --disable-xattr (default=auto) - Shared Objects --enable-libtool (default) --disable-libtool - Virtual Backup - Catalog Format Enhancements - Support for more than 4 Billion file entries - New stats tables - Duplicate Job Control - TLS Authentication - bextract non-portable Win32 data - State File updated at Job Termination - Bacula Plugins - FD bpipe plugin - FD Exchange plugin - libdbi DB driver - Console Enhancements - status slots - list joblog - command separator - Bootstrap regex - Restore seek optimization - Virtual Tape Emulation - Bat Enhancements - RunScript Enhancements - Status enhancements - FD connect timeout default to 3 minutes - ftruncate implemented for NFS Volumes - FD Version compatibily flag - Statistics Enhancements - Faster Attribute despooling - Document split into 6 manuals - GPLv2 license now compatible with OpenSSL - Win64 File daemon - Postmortum dump improvements in SD - Deadlock mutex detection in SD - Improved Volume management in SD to avoid deadlocks. - New configure install options --docdir= (default=/usr/share/doc/bacula-VERSION) --htmldir= (default=/usr/share/doc/bacula-VERSION/html -- bat help files) --plugindir= (default=sysconfdir, where plugins will be installed) - New Bare Metal Recovery with USB key. See rescue/linux/usb New Directives: - Max Full Interval - Max Diff Interval - Honor No Dump Flag - Exclude Dirs Containing - Recycle Pool - Max Run Sched Time - Max Wait Time - Full/Diff/Incr Max Run Time - Scratch Pool - Max Console Connections - Spool Size (in Job resource) - Allow Mixed Priorities - Allow Duplicate Jobs - Allow Higher Duplicates - Cancel Queued Duplicates - Cancel Running Duplicates - TLS Authenticate - Console (in RunScript) New features from Project Items Completed for version 3.0.0 also listed above: Item 1: Accurate restoration of renamed/deleted files Item 3: Merge multiple backups (Synthetic Backup or Consolidation) Item 4: Implement Catalog directive for Pool resource in Director Item 5: Add an item to the restore option where you can select a Pool Item 8: Implement Copy pools Item 12: Add Plug-ins to the FileSet Include statements. Item 13: Restore only file attributes (permissions, ACL, owner, group...) Item 18: Better control over Job execution Item 26: Store and restore extended attributes, especially selinux file contexts Item 27: make changing "spooldata=yes|no" possible for Item 28: Implement an option to modify the last written date for volumes Item n: Split documentation into several books ================================ Release Notes for Bacula 3.0.0 Bacula code: Total files = 520 Total lines = 205,459 (*.h *.c *.in) The diff between 2.4.4 and 2.5.x is 208,340 lines, so this release represents an enormous effort. This Director and Storage daemon must be upgraded at the same time, but they should be compatible with all 2.4.x File daemons, unless you use some of the new features that affect the FD. In other words, you should not have to upgrade all your File daemons when you upgrade. However, any release of version 2.5.40 or greater requires a database upgrade. ================== Warning !!!!!! ========================== New Catalog format in version 3.0.0 (2.5.40 or later) ----------------------------------------------------- This release of Bacula uses a new catalog format. We provide a set of scripts that permit to convert a 2.4.x (version 10) catalog to 3.0.0 (version 11). The Bacula project rpms distributed on Source Forge will automatically detect the database change and do the upgrade for you. We strongly recommend that you save a copy of your existing database before upgrading using rpms. The simplest way to upgrad the database assuming you are building from source: 1. Stop any current version of Bacula from running. 2. Save a copy of your existing database. 3. Configure, build, and install the 3.0.0 version of Bacula Note the new ./configure options in the manuals see the link at the bottom of this file. 4. cd 5. ./update_bacula_tables 6. If you have multiple catalogs, edit the update_bacula_tables script and put the name of another database, and then execute the script again. Repeat this until all Bacula catalogs have been updated. 7. Start the new Bacula. If everything worked, it should not print any error messages. The upgrade operation will convert the FileId index field of the File table from 32 bits to 64 bits. This operation will take TIME and will *temporarily* DOUBLE THE SIZE of your catalog. Bacula must be shutdown during this update, so, won't be able to run jobs during this period. For example, a 3 million files catalog will take 2 mins to upgrade on a normal machine. Don't forget to backup it before executing the script. If you start from scratch, you don't need to run the update_bacula_tables script because the create_bacula_tables script automatically creates the new table format. However, if you are using a version of Bacula older than 2.5.40 (e.g. 2.4.4) then you need to run the update_bacula_tables script that will be found in the /src/cats directory after you run the ./configure command. As mentioned above, before running this script, please backup your catalog database, and when you do running it, be sure shutdown Bacula and be aware that running the script can take some time depending on your database size. Important New configure options : ---------------------- This release of Bacula 3.0.0 uses libtool by default to generate the Bacula libraries as shared objects rather than being directly linked in as in prior versions. This means that the Bacula shared objects, must either be in a shared object directory known to the loader or they must be in the directory where the Bacula binaries are installed. It is also possible to explicitly specify the libraries directory on the ./configure line (--libdir=/full-path/dir), but this should not be necessary. ./configure --libdir= If you have problems with libtool or you wish to use the old way of building libraries and linking them into Bacula, you can do so by disabling libtool on the configure command line with: ./configure --disable-libtool During the installation of Bacula 3.0.0, it will now install bat help files (if you have configured bat). These files are placed in /usr/share/doc/bacula/html by default. If you want to put them elsewhere use: ./configure --htmldir= During the installation of Bacula, it will now install the ReleaseNotes, License, technotes, ChangeLog, and similar files in /usr/share/doc/bacula by default. If you want to put them elsewhere use: ./configure --docdir= During the installation of Bacula, any plugins will be installed in the plugindir, which is by default the same as libdir (/usr/lib). You can specify an alternate location with: ./configure --with-plugindir= ============================================================== This release includes large number of new features and changes. It should be more or less compatible with previous xx.conf files and File daemons providing that you are not using any of the new features. Please see the New Features chapter of the new manual, which documents some but not all the new features (we are still working on it): http://www.bacula.org/manuals/en/concepts/concepts/New_Features.html The ChangeLog has more details. ;;; Kern;;;03 Nobember 2008 at 17:35 Critical 2.4.3-orphaned-jobs.patch released We recently found and corrected a serious bug in Bacula that causes jobs to be orphaned or "stuck" in the director during the pruning process. Depending on what jobs get stuck and how many there are, it could prevent additional jobs from running. As best we can tell, this problem occurs only during what could be called extreme pruning conditions -- i.e. there are insufficient Volumes available for normal operations. In any case, we recommend that everyone apply the 2.4.3-orphaned-jobs.patch, which you can find in the bacula-patches section of the Source Forge download area as well as in the directory patches of both the trunk and Branch-2.4 SVN. ;;; Kern;;;12 October 2008 at 10:30am Creation of Bacula Systems SA Dear Members of the Bacula Community, I'm pleased to announce the creation of Bacula Systems S.A., a new company to provide professional support and service for Bacula. I believe you will be pleased to see how we have married a strong commitment to the ethos of honest open source software with the availability of services desired by a wide range of Bacula users. As many of you know, I began work on Bacula in 2000 and released the first public version in April 2002 to Source Forge. Although I have personally written a very substantial part of the code, I offer sincere thanks to the many members of the community who have provided ideas, fixes, testing, and contributions of code, without which Bacula would not be what it is today. It has been a labor of love and I am pleased that so many people have found Bacula useful. Before telling you more about Bacula Systems, let me reiterate my unfaltering, ongoing commitment to open source software and the Bacula open source project. The code for Bacula and all future releases will remain available as free open source software under the GPL license that I transferred to the protection of the Free Software Foundation of Europe. Unlike some other open source projects, there will be no separate "enterprise" or proprietary version of the Bacula source code. www.bacula.org will continue to be the home for Bacula project development. So, why create Bacula Systems? The company was created to respond to requests from users who want professional support with guaranteed levels of service and response times. To ensure continuity and the highest level of knowledge transfer, I will take the position of Chairman of the Board and Chief Technical Officer of Bacula Systems S.A.. Several members of the Bacula community have joined me to start the company. The other team members are also strongly dedicated to the spirit of keeping Bacula open and free while simultaneously offering commercial services to those for whom it is essential in making the decision to deploy Bacula. Bacula Systems is self-financed -- the initial capital comes from the founders; no outside venture capital was sought or accepted. This means we have the power to establish the company's priorities and we can remain dedicated to "honest open source". Bacula Systems S.A. is a Swiss company with offices in Yverdon-les-Bains, and with branches in France and Germany initially. We will open additional branches as business requires. I will continue to support development of Bacula via bacula.org and the Bacula community. Future developments will be in the "community" code base which will remain free. Bacula Systems will offer "funded development" to customers who wish to accelerate the addition of certain features to Bacula. Code developed this way will be contributed to the free distribution and will be available to the entire community at no charge. Bacula Systems will provide additional fee-based services, including high quality consulting, training, documentation and certified binaries. Our goal in establishing Bacula Systems is to be inclusive of the community, and expand it by creating opportunities for members of the Bacula community through a well-defined Partner Program. If you provide IT services or consulting, the Bacula Systems Partner Program can provide you with the additional back-up (pardon the pun) support you need to serve your customers more effectively. Our plan is to develop an international network of partners who offer high value added services to Bacula users -- installing, configuring and optimizing Bacula for their customers, as well as Level 3 and 4 support, with guaranteed service levels. We will also provide training and tools to our partners. The Bacula project website, www.bacula.org, and Source Forge will be unchanged in the mission and ideals of being free sources of information, mail lists and forum-based support for and by the community. Both Bacula source code and Bacula binaries will continue to be available for free, as in the past, and new releases will also be available for free. The new commercial website, www.baculasystems.com will provide information on commercial subscriptions for those users who want guaranteed levels of service, support, documentation and certified binaries. All members of the Bacula community are encouraged to register for free at www.baculasystems.com, so that you will receive announcements and news about our commercial activities, and so that you can send feedback to our new company, Bacula Systems. Thank you for your interest and participation in the Bacula community. Sincerely, Kern Sibbald ;;; Kern;;;11 October 2008 at 11:30am Bacula version 2.4.3 Released This is to let you know that the source tar files and the Win32 binaries for Bacula version 2.4.3 have been released to the Bacula Source Forge download area. Release 2.4.3 This is a bug fix to version 2.4.2. All daemons are compatible with other 2.4.x versions. Bugs Fixed: 1159, 1162. 1149, 1128, 1143, 1140, 1129 Change Summary: - Apply 2.4.2-cancel-non-running-jobs.patch to be able to cancel a non created job faster. - This should correct bug #1159 where Migration does not properly respect the Migration Low Bytes directive. - Fix typo in configure.in that breaks --with-db-password option - This code should fix the race condition that leads to a Director crash at job end time when the job list is updated. This was reported in bug #1162. - Remove all double quotes from SQLite creating script and replace by single quotes as suggested by John Huttley. - Fix SQL case problem that may cause the failure of DiskToCatalog in bug #1149. - Copy missing storage name into edit buffer. As far as I can tell this never caused a bug. - Remove catalog dependency for bcopy - Modify catalog scripts to have an easier packaging integration, using default variables. Make difference between SQLite3 and SQLite in db_get_type() - Attempt to fix bug #1128 InChanger flag cleared during Migration job when reading from one autochanger and writing to another. - Add more information to SD acquire.c INFO messages. - Fix NULL Volume name error when reading and the drive must be switched. - Fix a Verify InitCatalog problem where in certain cases a garbage filename may be entered in the verification database. This fixes bug #1143. - Add space after version before date in bat about dialog. - Fix seg fault in Dir during estimate command with no level value given. This fixes bug #1140. - Add message to migration job when the target job is already migrated. This closes bug #1129. Unless some really serious new bug shows up, this will be the last release until the next major version (3.0.0), which we hope will be ready around the end of the year. ;;; Kern;;;26 July 2008 at 10:30am Bacula version 2.4.2 Released This is to inform you that we have released the source and Win32 binaries of Bacula version 2.4.2 to the Bacula Source Forge download area. This is an important bug fix release since version 2.4.1. Bugs Fixed: 1034, 1125, 1118, 1124, 1107, 1129, 1126 Change Summary: 26Jul08 - When a migration job actually runs, re-check the Job record and skip if the job is already migrated. This should significantly reduce the problems with bug #1129. - Break the do_swapping into do_unload, do_swapping, and do_load. It is much more logical that way. - Implement a set_dcr_from_vol subroutine in acquire.c for reading volumes. This allows the dcr to be refreshed after being zapped when the wrong volume is mounted. This should fix bug #1126 - - During multiple tape restore, bacula does not ask for physical tape change, but rereads same tape - Apply patch submitted for bug #1107 with a small modification. This fixes a bug where bcopy copied too many records. - Make some tweaks to bsmtp based on patch submitted in bug #1124. This fixes bug #1124. - Make the default bat restore Pool be Any. This fixes bug #1118. - Fix bug #1125 which reports a SD crash at the end of a tape during restore. It was a debug statement that should not be in a release. - Fix #1034 by setting big timeout on mysql connections - Do partial integration of the Win32 bat build created by Eric. - Ensure that SD tried to mount a volume not in an autochanger at least once before asking for operator intervention. - Fix a pthreads bug in the Win32 pthreads emulation code affects only version 2.5.x and above. ;;; Kern;;;7 July 2008 at 10:30am Bacula version 2.4.1 Released This is to inform you that we have released the source and Win32 binaries of Bacula version 2.4.1 to the Bacula Source Forge download area. Bugs Fixed: 1103, 1100, 1105, 1094, 1109, 1106, 1101, 1102, 1112 1117, 1116, 1097. Change summary: - Clear in-use bit on vol when unused while swapping. - Remove sleep at end of ./bacula - Clear hash packet for hardlinked files correctly. This corrects a long standing bug where hardlinked files selected individually would occasionally not be restored. - Apply Eric's patch to ensure that autoprune does not return a Volume not in the autochanger unless requested to do so. - Correct bat restore display of multiple drives. This fixes bug #1117. - Do find_a_volume() each time an unload is done. This fixes the failure of maxvol2-test. - Use Qmsg() in job.c watchdog callback. - Release main control rwlock if ABORTing. - Make watchdog connect timeout queue messages rather than sending directly to avoid lock conflicts with the real thread. - Remove const char that causes problems with Python, which has older 'incorrect' headers. - Add const char in dbd.c to avoid compiler warnings. - Fix mtx-changer to detect both versions of Ubuntu (Debian) mt. This fixes bug #1116. - Fix failure of 2drive-concurrent-test. Always read label; clear_unload() only after drive is defined in acquire_for_read(). - Generally clean up the manual tape loading code. The main conceptial change is that when a volume is marked to be unloaded, its volume name is retained, and it is only marked as unloaded when either the autoloader says it is unloaded or another tape is read on that drive. - Fix a recycling problem with two autochangers reported in bug #1106. This may also (unlikely) fix a second recycling bug as reported in #1103. - Fix a SD lock volumes deadlock problem reported in bug #1100. - Fix format problem in bscan output reported in bug #1105. - Copy more data when restarting a job so that run overrides are kept. This should fix bug #1094. - Backport updates to jobq.c where possible. - Fix bug where SD did not ask operator if the device could not be opened. Reported by Eric. - Add dbuser to DIR conf file (replaces user). - Add --with-db-password to ./configure - Fix regress to handle db_password. - Fix a couple of pedantic compiler warnings. - Fix bug when starting a restore on a storage that doesn't have the requested MediaType. - More work on word alignments -- eliminate all ints from the configuration routines. - Fix bug reported by Scott Barninger where the bacula script refers to scripts in the wrong directory. Needed to meet the requirements of recent FHS location changes. - Fix word alignment problem on non-Intel 64 bit machines such as Solaris. This should fix bug #1097 -- bus error in SD. - Add missing win32/patches/wxWidgets.patch to 2.4 repository. ;;; Kern;;;4 Jun 2008 at 10:30am Bacula version 2.4.0 Released This is to inform you that we have released the source and Win32 binaries of Bacula version 2.4.0 to the Bacula Source Forge download area. This release consists mainly of a number of bug fixes since 2.2.x but most importantly, a rewrite of significant portions of the Storage daemon reservation and autochanger code. This rewritten code is simpler, more stable, and works much better, particularly with multiple drive autochangers than the prior code did. That said, there are still a number of issues to be resolved. Note, the new code has not been tested in manual volume mount situations. As usual, we strongly recommend when installing to keep the Director and the Storage daemon on the same version. However, since this release only contains refactored code and bug fixes rather than new features, the clients (File daemons) should function perfectly with any 2.2.x version, and there is no database upgrade needed. ===================================================== Release Notes for Bacula 2.4.0 Bacula code: Total files = 500 Total lines = 188,654 (*.h *.c *.in) This Director and Storage daemon must be upgraded at the same time, but they should be compatible with all 2.0.x File daemons, unless you use some of the new features that affect the FD. In other words, you should not have to upgrade all your File daemons when you upgrade. There is no database upgrade needed from version 2.0.x to 2.2.0 nor from version 2.2.x to version 2.4.0 ================== Warning !!!!!! ========================== As of Version 2.4.0, the Win32 FD should not descend into any reparse point directory or reparse mount points unless the specified directory is explicitly mentioned at the top level of FileSet (as with Unix). A file that is linked to another file will be backed up, much like Unix hardlinked files. If you want reparse directories backed up, you must explicitly include them in your FileSet. ====================================================== This release consists mainly of a number of bug fixes since 2.2.x but most importantly, a rewrite of significant portions of the Storage daemon reservation and autochanger code. This rewritten code is simpler, more stable, and works much better, particularly with multiple drive autochangers than the prior code did. That said, there are still a number of issues to be resolved. Note, the new code has not been tested in manual volume mount situations. Bugs fixed: 1095, 1086, 1091, 1070, 1041, 1083, 1078, 1066, 1068, 1038 1062, 1065, 1046, 1047, 1031 New features: - You can now build bat without the QWT libraries. Use --without-qwt as a ./configure option. Release Version 2.4.0 - Update version to 2.4.0 to reflect the magnitude of the SD changes. - Make sure to clear JS_WaitMedia when operator mounts a Volume. This fixes bug #1095. - Add create_postgresql_database.sql to Win32 installer. Should fix problem reported by Juilio Monteiro. - Get correct slot when auto unloading a device. This fixes bug #1086. - Fix possible seg fault if SQL error. - Fix renaming a Volume, which used the wrong Volume name. - If operator has rewind tape, print warning, release tape and try once more. If tape is positioned somewhere, something went wrong, so mark the tape in error and try once more. Previously this error was fatal, now it produces an error message. - Ensure correct volume name displayed during restore - Fix a few more Coverity reported problems. - Fix #1091 about bad output in estimate command. - Modify autochanger locking to attempt to avoid race conditions. - Make sure device not busy before doing label command. - Display open() errors except when polling. Previously too many were suppressed. This should fix bug #1070. - Fix Win32 reparse points. Bacula will not recurse into any reparse point directory, including mount points, unless the directory is explicitly mentioned at the top level (same as with Unix). A file that is linked to another file will be backed up -- much as Unix does for hardlinked files. This fixes bug #1041. - Remove StorageId test when pruning and recycling (Eric's changes). - Fix buffer overruns detected by Coverity. - Implement --without-qwt - Fix layout of restore tree dialog - Add configure bat QWT libraries, so that bat can be built with or without the QWT libaries. - Implement regression that explicitly tests swapping a Volume from one drive to another. - Enhance disk-changer to detect most error conditions. - Fix SD code so that it properly swaps a Volume between drives. This fixes bug #1083. - Prevent a Volume that is being swapped from being freed from the volume list. This will most likely fix, at least partially, bug #1083. - Fix strippath so that it does not get a buffer overrun and crash FD. This fixes bug #1078. - Make inability to change owner/group when creating a dir only a warning rather than an error. - Fix SQL query in migration code - Fix bat seg fault at termination. - Add Bacula generated version to bat about box. - Backport development stream SD reservation system changes. - When wrong volume is mounted during read, unload_autochanger. - Stop searching for Volumes in SD askdir if DIR returns the same volume name twice in a row. - Rework class structures for VOLRES, DCR, and DEVICE to make the method names a bit more logical, and for more logically handling the responsibilities. - Remove redundant code in terminating the scheduler that just causes a seg fault in many cases. - Improve algorithm for detecting pre-reserved volume and swapping volumes. - Prevent volume from being released while being swapped. - Refactor parts of stored/mount.c - Add sanity checks for VolWriteTime and VolReadTime - Take care of bad clock changes while computing VolWriteTime and VolReadTime. This should fix or limit #1066 - Correct error string numbers in dird/catreq.c - Restructure reserving, acquiring, and mounting volumes. Calls to autochanger are deferred for mount.c -- simplifes the code. - Do not prune any running job. It just fails the job. - Lock the volumes when changing dev->reserved_device and marking the volume unused otherwise the device can get reserved by another job before the volume is released, thus blocking it. - Correct some SD catalog request error messages. - Turn off code in read_record that causes a seg fault in the SD when reading past an EOS_LABEL. - Turn off unloading the autochanger in reserve.c as it just causes problems. - Lock volumes when unreserving a device. - Do not mark volume unused when recycling. - Fix bug #1068 fixes a SD crash when using Virtual autochanger. - Generate correct JobMedia records during spooling/despooling when running concurrent jobs. Thanks to Tom Ivar Helbekkmo for excellent analysis and testing. - *Massive* commit of all fixes and back ports to create 2.2.9 Mostly SD reservations enhancements. - Fix Win32 FD backup/restore memory leak due to improper termination of BackupRead/Write. This fixes bug# 1038. - Fixes a StorageId problem with volumes after migration. - Implements autostart scripts for Debian - Fix mtx-changer.in for broken Debian mt program. - Apply doc fix from bug #1062. - Resolve crash and improper restore wx-console Win32 restore GUI. Fixes bug #1065. - Update Win32 wxWidgets to latest version. - Attempt to do correct handling of Win32 mount points. Should fix bug #1046. - Add const to AIX prototype for initgroups() - Fix to the JobMedia patch, which introduced a new problem. - Fix creating first JobMedia record during Migration to include proper index. This caused slow restores of migrated jobs. - Fix bug #1047, do not strip paths on symbolic links. - Set catalog backup database and user name from values specified on the ./configure line. - Apply patch to correct bug #1031, about wrong pool source information in job report. ;;;; Kern;;;27 Jan 2008 at 10:30am Bacula version 2.2.8 Released Bacula version 2.2.8 source tar files as well as the Win32 binaries are available in the bacula and Win32 release areas of Source Forge. I have hidden the previous BETA release Version 2.2.8 is a bug fix to version 2.2.7 and has a few additional bugs fixed than the BETA 2.2.8 version previously released: - It fixes bugs: 1036, 1033(doc), 1028, 1040, 1045(doc), 1030, 1042(partially), and possibly bugs 1018 and 1032. Bugs 1018 and 1032 involve problems with multiple-drive autochangers, and are difficult to reproduce. See the ChangeLog for more details. Note, if you previously loaded version 2.2.8 BETA, you will probably want to upgrade, but it is not urgent ... ;;; Kern;;;9 Jan 2008 at 20:30 Bacula version BETA 2.2.8 Released Bacula version 2.2.8 source tar files as well as the Win32 binaries are available in the bacula-beta and Win32-beta release areas of Source Forge Version BETA 2.2.8 is a bug fix to version 2.2.7: - It fixes bugs: 1036, 1033(doc), 1028, and possibly 1018 and 1032. Bugs 1018 and 1032 involve problems with multiple-drive autochangers. ;;; Kern;;;24 Dec 2007;;20:30 Bacula version 2.2.7 Released Bacula version 2.2.7 source tar files as well as the Win32 binaries are available in the Bacula release area of Source Forge Version 2.2.7 has several new features and several important bug fixes since version 2.2.6: - It fixes bugs: 1009, 1022, 1024, 1019, 1012, 1021, 1020 1007, 1008. For more details, please see the technotes-2.1 file. - Fixed a seg fault reported by Frank Sweetser that depended on exact path lengths, but the problem was in bsnprintf.c - Double quoting include filenames (@xxx) in Bacula conf files is now possible, thanks to a patch by Michael Stapelberg. - You can pipe input to include filenames (@|prog) by using a vertical bar, thanks to the above patch. - A daylight savings time bug in the Win32 bsmpt was fixed by a patch from Nerijus Baliunas. - Marc Cousins submitted a patch that permits building the PostgreSQL driver with version 8.3. - The configure option --archivedir has been changed to --with-archivedir ;;; Kern;;;9 Nov 2007;;15:25 Bacula version 2.2.6 Released Bacula version 2.2.6 source tar files as well as the Win32 binaries are available in the Bacula release area of Source Forge. This release is a minor fix upgrade to version 2.2.5, and we recommend that all users upgrade when they can. Version 2.2.6 is a minor bug fix realease to version 2.2.5 - It fixes bugs: #1003, 942, 982, 990(response only), 991, 993, 986, 976. - Fix bat crash wen it cannot connect to Director. - Fix joblist failure bug in bat. ;;; Kern;;;9 Oct 2007;;15:25 Bacula version 2.2.5 Released Despite the fact that the Release Notes are rather short, the bug fixes represent quite a lot of work: Version 2.2.5 is a major bug fix release to version 2.2.4 - It fixes the following bugs: #961, 962, 963, 969, 968, 960, 964, (possibly 935 and 903), 953, 953, 967, 966, 965, 954, 957, 908, 958, and 955. - It also improves listing performance problems in bat pointed out by Chris Howells. ;;; Kern;;;29 Sept 2007;;20:30 A serious data loss bug in Bacula version 2.2.4 found and fixed This bug was very elusive and time consuming to track down. It turned out to be a race condition that can lose the last one or two blocks of a Job, which can happen in rare cases only when running multiple simultaneous jobs when a volume fills and one Job finishes receiving the last data from the FD and at the same time a second job detects the end of the Volume. The bug was introduced in version 2.0.0 and did not exist in version 1.38.x. If the bug is triggered, the data is lost (not written to the Volume), and it can occur for any backup job of any level under the conditions noted above. The bug is reported in the bugs database as bug #964, and just this morning I found and tested a fix, which is attached as a patch to the bug report. The patch (2.2.4-lost-block.patch) is also uploaded to the bacula-patches 2.2.x release area. This bug may also be part of the problems reported in bug #935 and possibly #903. Also in the bacula-patches 2.2.x area, you will find other patches that fixes bugs #953, 966, 967, 965, 958, 908, and 955. Please refer to bugs.bacula.org for the details. Though this bug quite serious (data loss), it should be rare. However, we recommend everyone to apply the patch. ;;; Kern;;;2007/9/14;;;14:30 Bacula version 2.2.4 Released This version of Bacula is a minor bug release to version 2.2.3. It contains the following fixes: - Possible fix for authorization problems bug #953. - Possible fix for bug #908. - Add waits to multiple exit detection code to try to force pid file to always be deleted. - Restore good dev.tar.gz to rescue set appropriate binary property. This fixes bug #950. - Fix seg fault in error exit of acquire_for_read after unsuccessfully trying to switch drives by checking for blocking before unblocking. Fixes bug #906. - Cancel storage daemon in all cases where FD reports error. This should fix virtually all cases of bug #920 and will ensure that Devices are released as soon as possible. - Fix error message that was clobbered when Dir tells SD it does not have write permission on Volume. This should fix a minor point in bug #942, but not the main problem. - Fix migration code to get correct Volume name with multiple volumes by skipping |. Fixes bug #936. - Implement patch supplied by Landon to fix bug #944 where using TLS with bconsole uses 99+% of the CPU. - Fix bug #946 about "bacula-dir -t" which doesn't works as expected. - Using "m" in bconsole will show messages as in prior versions and not memory usage. - Note, you need GTK >= 2.10 to be able to link the Tray Monitor program. ;;; Kern;;;2007/9/9;;;14:30 I regret to announce that there is a rather serious bug in Bacula. Bacula bug #935 reports that during a restore, a large number of files are missing and thus not restored. This is really quite surprising because we have a fairly extensive regression test suite that explicitly tests for this kind of problem many times. Despite our testing, there is indeed a bug in Bacula that has the following characteristics: 1. It happens only when multiple simultaneous Jobs are run (regardless of whether or not data spooling is enabled), and happens only when the Storage daemon is changing from one Volume to another -- i.e. the backups span multiple volumes, and it only happens for Jobs writing to the same volume. 2. It has only been observed on disk based backup, but not on tape. 3. Under the right circumstances (timing), it could and probably does happen on tape backups. 4. It seems to be timing dependent, and requires multiple clients to reproduce, although under the right circumstances, it should be reproducible with a single client doing multiple simultaneous backups. 5. Analysis indicates that it happens most often when the clients are slow (e.g. doing Incremental backups). 6. It has been verified to exist in versions 2.0.x and 2.2.x. 7. It should also be in version 1.38, but could not be reproduced in testing, perhaps due to timing considerations or the fact that the test FD daemons were version 2.2.2. 8. The data is correctly stored on the Volume, but incorrect index (JobMedia) records are stored in the database. (the JobMedia record generated during the Volume change contains the index of the new Volume rather than the previous Volume). This will be described in more detail below. 9. You can prevent the problem from occurring by either turning off multiple simultaneous Jobs or by ensuring that while running multiple simultaneous Jobs that those Jobs do not span Volumes. E.g. you could manually mark Volumes as full when they are sufficiently large. 10. If you are not running multiple simultaneous Jobs, you will not be affected by this bug. 11. If you are running multiple simultaneous Jobs to tapes, I believe there is a reasonable probability that this problem could show up when Jobs are split across tapes. 12. If you are running multiple simultaneous Jobs to disks, I believe there is a high probability that this problem will show up when Jobs are split across disks Volumes. 13. The bug concerns only the Storage daemon so there is no need to update the clients, though I do recommend updating the Director when installing an updated Storage daemon. I have uploaded patches to bug #935 (bugs.bacula.org) that will correct version 2.2.0, 2.2.1, and 2.2.2. The patch has been tested only on version 2.2.2 and passes all regression tests as well as the specific test that reproduced the problem. The patch has now been confirmed to fix the problem reported, and Bacula version 2.2.3 has been released to Source Forge. For the technical details of the bug, please see: http://www.bacula.org/downloads/bug-935.txt ;;; Kern;;;2007/8/11;;;14:30 Bacula Version 2.2.0 has been released to Source Forge. Release Notes for Bacula 2.2.0 Bacula code: Total files = 520 Total lines = 195,550 (*.h *.c *.in) 82 new files, 41,221 new lines of code, 208,380 lines of change from 2.0.3 This Director and Storage daemon must be upgraded at the same time, but they should be compatible with all 2.0.x File daemons, unless you use some of the new features that affect the FD. In other words, you should not have to upgrade all your File daemons when you upgrade. There is no database upgrade needed from version 2.0.x to 2.2.0. Areas requiring caution or testing: - You must have the thread safe version of MySQL client libraries loaded to build with MySQL enabled. - Volumes are pruned only when absolutely necessary -- this may cause your database to grow compared to prior Bacula versions. - Solaris door and even port files are no longer restored (equivalent to what we do with sockets). - SQLite is no longer supported for Solaris -- it fails too often with bus errors. SQLite3 should work on Solaris. - The default setting for SQLite3 is now 'PRAGMA synchronous=OFF'. This makes it run 30 times faster, but increases the possiblity of a corrupted database if your server shuts down unexpectedly. The default behavior can be changed in src/version.h - Restore on Win32, and in particular on Vista is untested. Please test before relying on it. It should backup and restore reparse points. - Win32 servers are untested, and very likely not to work. The major new features are: - Much faster insertion of attributes (somewhere around 10 times), many thanks to Eric Bollengier and Marc Cousin. - First release of bat (Bacula Administration Tool). Note to build bat you must explicitly enable it on the ./configure line, you must have the Qt4 version 4.2 or later libraries loaded, the qwt (Qt Graphics) package loaded, and qmake and the other Qt4 tools must be available. Most of the implementation was done by Dirk Bartley. - Red/Black restore in memory tree (500 times faster loading). - The Regex Where code to allow easier relocation of restored files thanks to Eric. - Socket level heartbeat for all connections (untested). - posix_fadvise() use in the FD to improve performance reduces swapping due to opening/reading lots of files. Win32 equivalent implemented. - Much improved Volume reservation code that should eliminate most conflicts experienced in multiple drive autochangers. - Simpler locking in the SD in the reservation system. - Detection of file size/date change during backup if enabled. - New Recycle Pool feature -- thanks to Eric. - Efficient implementation of very large include/exclude lists. - Volumes are no longer pruned during 'status dir' - Pruning is now more efficient, and if a Volume is purged, during pruning, it is immediately discovered. - License is now GPL v2 without modifications, fix a few copyright mistakes made when adding FSFE copyright notice. New ./configure options: - --enable-bwx-console - --enable-bat - --with-qwt= - --with-db-name= - --with-db-user= - --enable-batch-insert New bconsole commands: - exec - memory - update recyclepool - .sql - .api - .pwd (in restore tree) - restoreclient (keyword) - backupclient (keyword) - regexwhere (keyword) - update jobid (new command) - recyclepool (keyword) New directives: - Heartbeat Interval (bconsole.conf) - Heartbeat Interval (bacula-dir.conf in Director, Client, Storage) - TLS Allowed CN (bacula-dir.conf in Client) - Regex Where (bacula-dir.conf in Job) - Strip Prefix (bacula-dir.conf in Job) - Add Prefix (bacula-dir.conf in Job) - Add Suffex (bacula-dir.conf in Job) - Recycle Pool (bacula-dir.conf in Pool) - FailJobOnError (bacula-dir.conf in RunScript) - CheckFileChanges (bacula-dir.conf in FileSet) - StripPath (bacula-dir.conf in FileSet) Other features or bug fixes: - Fixed bugs: 916, 910, 917, 914, 906, 907, 842, 830, 893, 861, 888, 886, 807, 877, 872 885, 887, 864, 874, 882, 881, 863, 859, 856, 854, 845, 847, 846, 809, 772, 822, 825, 824, 808, 802, 797, 798, 795, 789, 791, 788, 780, 763, 782, 612, 767, 775, 621, 772, 764, 766, 621, 761, 755, 750, 741, 747, 742, 744, and 743. - Configure bat with --enable-bat. Define qwt libraries with --with-qwt=. See Installation chapter of manual for details. - Create a depkgs-qt package that has both Qt4 and qwt, which are needed to build bat. Most modern Linux systems will have both these packages in the distro. - Storage overrides delete all previous storage definitions instead of prepending. - One should be able to mount and unmount removable devices if the Device resource has Removeable Media set and the mount and unmount directives are defined. - ./configure will do a better job of searching for qwt libraries. - The Win32 version can no longer be shutdown from the tray monitor. Use the command line or the Services panne. - Keep prune_volumes() from pruning the whole Scratch pool. - More debug output in status storage. - Correct moving a Scratch volume from pool to pool (some critical columns were lost). - Different locking in reservations and despooling systems, which means more micro-locking and less macro-locking, which should give a lot more concurrency at the expense of slightly (<0.1%) more overhead due to more locking/unlocking, but concurrent jobs should run much faster. - Additional drive reservation algorithm that should solve a lot of the problems experienced with multiple drive autochangers. - Storage daemon status command enhanced to more clearly show Volume, pool and media type when a job is waiting. - Made bsmtp work with more strict SMTP servers. - Detect doubly freed buffers in smartall.c - wx-console renamed to bwx-console (Fedora request) - gnome-console renamed to bgnome-console (Fedora request) - Migration preserves original job's FileSetId - Spooling implemented for migration jobs. - Config files can be read through a pipe, by specifying a leading | in front of the configuration path/filename. - New memory command (bconsole) that will print the current Director's memory usage, and an in use buffer dump. - Console name changed from *Console* to -Console- to accomodate Win32 filename restrictions. - Corrected the Win32 ftruncate bug. - Additional version information added to Job reports. - New -8 option for bsmtp to specify UTF-8 encoding type. - bsmtp will no longer add < > to target (from, to, cc) if there is already a < in the target. - Prefer Mounted Volumes extended to mean a volume that is being mounted by another job. - Runscript timing set to same as version 1.38.11 - New TLS Allowed CN directive(s) permitted. - New bconsole 'exec' command to run external script/command. - Turn on FreeBSD/OpenBSD code to set EOT model on tape. - Drop from root done before database is opened. - Database user and name can be configured with: --with-db-name=name --with-db-user=user - Turn on wait_for_drive in mtx-changer script. - Rework how bar codes are handled in mtx-changer script. This appears to have been an unreported bug. - Updated nagios plugin supplied by Christian Masopust - Better restricted console ACL checking. - New Client Connect Wait directive in Storage daemon so that users can configure how long SD waits for FD connection. - Bacula will no longer permit pruning of the currently running job (note, if other jobs are running, they may be pruned). - Sockets are no longer restored. - dbcheck works in 300K chunks so will typically run faster. - Include/Exclude lists can now be efficiently handled for quite large sizes -- tens of thousands of entries. - Several memory leaks in migration and database usage were fixed. - New console keyword restoreclient, which specifies the client to which the restore will be sent. The client keyword specifies the backup client. The restoreclient keyword is optional if it is not specified, the backup client will also be the restore client. - The disk file size is now checked to ensure that it agrees with the catalog value before Bacula will append to the disk (same as tape and DVD). ;;; Kern;;;2007/3/6;;;14:30 Bacula Version 2.0.3 has been released to Source Forge. This is a bug fix release to version 2.0.2. If you are upgrading from a version older than 2.0.0, please be sure to read the important notes below. Also, please check the patches directory in the current SVN or the patches release section on Source Forge for important bug fixes to this version. 5Mar07 kes File migrate bug with Pool Occupancy using mediaid instead of jobids. Fixes bug #795. kes Fix orphaned buffers in filed backup and verify due to crypto buffers not freed during errors. Fixes bug #789. 04Mar07 kes Add smartctl call to bacula-sd.conf as an example of getting tape alert info. 02Mar07 kes Add Client Connect Wait to Storage daemon to permit users to modify the time the SD waits for a FD connection. 28Feb07 kes Apply Command ACL filter to JobId list in restore command. kes Correct typeo in var.c patch. 27Feb07 kes Don't let Bacula prune File or Job records for the current Job. kes Fix variable substitution pad + inc bug reported (with patch) in bug #791. 26Feb07 kes Correct SQLite log table index as reported by Luca Berra. 24Feb07 ebl Fix FIFO stuff, bacula tries to rewind the FIFO... Thanks to Andreas 22Feb07 kes Fix a few places in lib/message.c where the open fd may not be zeroed. 21Feb07 kes Add LANG=C to autoconf/randpass so it works with languages other than English. Fixes bug #788. 20Feb07 ebl Revert ClientRunBeforeJob as it was in 1.38.x This fixes bug #780 You will not be able to generate Include/Exclude list any more. If you want to use this, you can apply trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch 19Feb07 kes Restore of sockets created false error messages because Bacula no longer restores sockets, but the code was still trying to set the attributes on a non-existent file. Reported by a user. 16Feb07 kes Fix encryption deblocking bug, which caused some restored files to be truncated. This fixes bug #763. This is a CRITICAL bug fix. kes Add FD event sequence order prepared by Eric -- for RunScripts. kes Fix 12am/pm bug as reported in bug #782. 15Feb07 kes Add quick disconnect FD code from 2.1.4 to 2.0.3. This code causes the SD to release the FD as soon as the FD has sent all the data to the SD. After that the SD will do any final despooling (data and attributes) that are necessary. This allows laptops to disconnect much quicker from the network after a backup. 13Feb07 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1. 11Feb07 kes Optimize the use of the database a bit in the Status dir command. Only open it when needed, ensure that if any previous database was opened, it is closed. 10Feb07 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename, and File records in 300K chunks to be more efficient. This idea came from Juan Luis Frances (if I remember right). 09Feb07 kes Update projects list. 08Feb07 kes Fix dird/ua_cmds.c so that a cancel command checks if the console is authorized to cancel the job. This fixes bug #767. kes Modify SD so that the VolCatJobs medium record is updated at the beginning of a Job rather than the end. This fixes bug #775 where exceeding MaxVolJobs caused jobs to fail. kes Added a mutex around getting and setting Volume information so that multiple simultaneous jobs will single thread. 07Feb07 Switch to using Subversion kes Remove src/pygtk-console/ from configure 06Feb07 kes Delete src/lib/btree.c from win32 build, then add rblist.c plus the entrypoints. kes Apply patch supplied that corrects debug print in canceling jobs for max run time. Supplied as part of bug #621, which was previously fixed. 05Feb07 kes Test on job_canceled() and sd_msg_thread_done inside loop starting the message thread to avoid a race condition. Fixes bug #771. kes Remove rl_catch_signal from console.c as it conflicted with the header definition. Fixes bug #765. ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive) 04Feb07 kes Clarify some stored/acquire messages to indicate if the problem is with read or append. 02Feb07 kes Fix memory leak with storage ids in cats/sql_get.c kes Terminate watchdog earlier to avoid reference to released memory -- reported by Jason Austin. kes Move closing the database from jobq.c to the director daemon termination routine. This fixes memory leaks for shadow jobs (i.e. migration jobs). kes Free up the unique jobid chain items in migrate.c. This fixes a memory leak problem. kes Convert some ugly looking for statements to use foreach_alist in findlib/find.c. This will facilitate converting the structures to use dlist (for large include/exclude lists). kes Fix a bug in the btree.c and btree.h routines, then rename them rblist and add them to be built in src/lib. Include some new methods written by Rudolf Cejka that make the code more readable (hides some of the ugly casting). 26Jan07 (back port) kes Implement item #12 on project list -- quick release of FD by the SD. This is noted in more detail above. ;;; Kern;;;2007/1/28;;;14:30 Bacula Version 2.0.2 released: 28Jan08 kes Fix maxruntime bug #621. 27Jan07 kes Get current main CVS .specs for RedHat, SuSE, Mandrake. 26Jan07 ebl Implement the include JobID in spool file name project. kes Reorder projects file in order determined by Jan 2007 vote. kes Fix open of SQLite3 db where user does not have write permission so that DIR does not crash. Fixes bug #761. 25Jan07 kes Change 'Device not configured to autolabel' from INFO to WARNING. kes Fix jobq.c to restart failed jobs when Reschedule Times = 0 which should restart an indefinite # of times. kes Fix configure --help to print --with-mysql[=DIR]. Same for other DIR specifications. 23Jan07 rn Fix msvc build problems. Fix bacula.dll exports for msvc build. Fix path quoting in SQLite scripts. Fix problems with SHGetFolderPath. 19Jan07 kes Create patches/2.0.1-restart.patch. Fixes bug #755. 18Jan07 kes Fix Job restart on error bug that promotes an Inc to a Full backup. This should fix bug #755. kes Add qt-console and first cut of code. ;;; Kern;;;2007/1/13;;;14:30 Bacula Version 2.0.1 has been released to Source Forge. This is bug fix update to version 2.0.0 and contains the following fixes: - Fix Bacula->Documentation link on Win32 to point to index.html instead of bacula.html. Fixed bug #750. - Return JobId in db_get_job_record() when JobId==0. This should fix bug #741. - Do not release source pointers when restarting a failed job. - Add dynamic dll entry point for SHGetFolderPath to Win32 code. This *should* fix bug #747. - Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix bug #742. - Modify USTORE constructor to set an empty store_source string, and don't copy the store_source string in a cancel. Hopefully this will fix Arno's seg fault, bug #744. - Add back code to disable conio in configure. Fixes bug #743. - Correct the Options scanner in the FD to correctly handle SHA1 option, which was eating the next option. Reported by Sebastien Guilbaud. - Add code to indicate when the SD is spooling, spool wait, and despooling as requested by Alan Brown. ;;; Kern;;;2007/1/4;;;14:30 Bacula Version 2.0.0 has been released to Source Forge. There is an English Press Kit, written by Dan Langille at: http://www.bacula.org/about/press/presskit200.html.en and a German version, translated by Arno Lehmann at: http://www.bacula.org/about/press/presskit200.html.de ;;; Kern;;;2007/1/4;;;14:31 Release Notes for Bacula 2.0.0 Bacula code: Total files = 438 Total lines = 154,329 (*.h *.c *.in) ==== IMPORTANT Catalog update required ===== - The database format has been updated from what was used in Bacula 1.38.x. You must manually update your database before running Bacula 1.39.x or higher. If you are using Bacula supplied RPMs this is not necessary as the RPM does it automatically. Please backup your previous version of the database before running the update. The update script will be automatically installed in your scripts directory, or can also be found in /src/cats. It is called: ./update_bacula_tables It is necessary to run it only once the first time you move to a 2.0.0. Upgrading the Bacula version thereafter does not require updating the database again. Depending on the size of your database the script make take a bit of time, to run, but in general, it should be very fast. ==== IMPORTANT new Win32 install procedure ===== For Win32 migrations from versions prior to 1.39.0 nothing special needs to be done to upgrade. Everything should be taken care of automatically. The only thing not done is to delete the old C:\bacula directory mostly out of paranoia. ==== IMPORTANT miscellaneous ==== - The Gnome console program (gconsole) no longer functions as it should.More importantly, in restore mode, the restore tree is no longer shown in the left pane. I suspect this is due to incompatible changes in the GTK+ API, and hence have given up on gnome and gtk+, as this has already happened several times previously. At some point there will be a new GUI console. - The bacula-dir.conf directive Accept Any Volume has been removed because it was never implemented. You must delete all occurrence of this directive for the Director to run. The Storage daemon will automatically accept any valid Volume that you mount. - The --mandir ./configure option now points to the top level man directory. The man files will be installed under mandir/man8 and mandir/man1 as appropriate. - You *should* be able to use 1.38.x FDs with version 2.0.0 Director and SD providing you do not use any of the new features (runscript, data encryption). It seems to work here, but we do not guarantee it. - Your Director and SD must be simultaneously upgraded. - The restore command no longer uses the MediaType as the primary method of finding a suitable Storage device. Normally it will select the last device used to write a Volume. If no storage device is defined, it will use the old algorithm which selects the first Storage resource with the correct MediaType. - The MD5/SHA1 hash codes kept in the database are now kept in a binary format compatible with the rest of the world. If you are running verify jobs, you *must* do an InitCatalog or all files will show an MD5 difference. Also, authentication uses the new algorithm by default, but *should* accept connections from older components (FD) using the old non-compatible algorithm. This has been tested, but more more testing is still needed. - A stock SuSE 10.1 kernel may crash when Bacula runs and accesses the tape drive. Workaround, load the SuSE 10.1 version 2.6.16.21-0.25 kernel or later. The SuSE 10.2 Alpha 5 or later kernel also works. This problem may also be present in certain Fedora FC5 kernels. - If you have been using the data encryption feature of 1.39.x, please be aware that certain combinations of encryption and other options with version 1.39.0 through 1.39.26 created Volume data that cannot be restored. We strongly recommend that anyone using encryption carefully review his/her backups and at a minium do a Full backup with 1.39.28 of all encrypted data. Robert Nelson has identified and fixed it as follows: As of 1.39.27: No filters = Works fine Sparse = Works fine Compression = Works fine Encryption = Works fine Sparse + Compression = Works fine Sparse + Encryption = Restore broken Sparse + Compression + Encryption = Restore broken Compression + Encryption = Restore broken As of 1.39.28: Most combinations work, but some encrypted files are not properly restored. As of 1.39.30: All combinations work fine except Sparse+Encryption. Bottom line, if you are using data encryption, please test restoring data to be sure it all works correctly. - The current Volume format written by 1.39.22 is different from the format written by previous versions. The two formats are not compatible. Thus any DVDs written prior to 1.39.22 will be unreadable by version 1.39.22. - If you previously run a Bacula version prior to 1.39.30, the JobMedia data may not be correct for disk Volumes. This can cause incorrect seeking in versions after 1.39.30. If you experience what appears to be data I/O or integrity errors during restores, please add the following directive to your disk DEVICE resource in the Storage daemon conf file: Block Positioning = no This will turn off all seek requests during restores and avoid this problem. - VSS for Windows clients is now enabled by default. - Do not unload autochanger when doing "update slots" - Implement mount command for autochanger, see manual. New Features in 2.0.0: - Turn on disk seek code for restores. - There is a partial but reasonable translation of the Bacula messages for French. To install it, first configure and build Bacula, then as root run: cd /po make install If you have your locale set properly you will get the translated messages. - Bacula now support Migration jobs that are documented in a new Migration chapter in the manual http://www.bacula.org/dev-manual/Migration.html - Data encryption is now implemented and is documented in a new chapter of the manual at: http://www.bacula.org/dev-manual/Bacula_Data_Encryption.html - Additional support for removable devices. See the Requires Mount, Mount Point, Mount Command, and Unmount Commands in the Storage daemon configuration chapter: http://www.bacula.org/dev-manual/Storage_Daemon_Configuratio.html Also see the Edit Codes for Mount and Unmount Directives in the same chapter. - Switch the Win32 build from using Microsoft C++ to using mingw32 cross-compiling. The initial work was done by Howard Thomson, then tweaked by me. Robert Nelson then totally reworked the cross-compiling code so that it not only cross-compiles, but also compiles on Visual Studio, and at the same time, he added all the current Unix features to the FD, such as selection on drives, encryption support, building *all* the tools, ... - The Director and Storage daemon have now been ported to Win32. This code is working but should still be tested carefully before putting into production. - Bacula restore and bextract can now extract non-portable Win32 data to any client (including Unix/Linux clients). Of course, in doing so, the Microsoft specific permissions and ACLs will be lost. Thanks to Thorsten Engel for this code. - The 260 character limitation for Win32 paths name lengths is now eliminated thanks to Thorsten Engel. However, if you are using Volume Shadow Copy, please be careful to specify all the paths in the bacula-fd.conf file using a full path notation including the drive letter. - Eric Bollengier wrote new RunScript directives that includes the old RunBefore/AfterJob and ClientRunBefore/AfterJob features plus a *lot* more, allowing you to control just about every aspect of running scripts. See the manual for detailed documentation. http://www.bacula.org/dev-manual/Configuring_Director.html#5227 - SunOS ACLs should now work thanks to a patch from David Duchscher. - Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at If this patch is applied, the number of days can be specified with "list nextvol days=xx" or "status dir days=xx" This can be used to preview the next scheduled job (and the next tape to be used) on Fridays if there are no scheduled jobs during the weekend. - From Eric Bollengier. One can now using the bconsole wait command do: wait (wait for all jobs to stop) wait jobid=nn wait jobuid=unique id wait job=job-name - Volumes can now be set to Enable, Disable, or Archive. If they are not enabled, Volumes will not be mounted. Implement update volume enable=(on|off|true|false|archived|0|1|2) - Add Catalog message destination in Messages resource that puts the job report in the Log database table. - Writing/reading DVD Volumes is much more stable -- to the point of being useful. Thanks to Richard Mortimer. - Add enable/disable job=. This command prevents the specified job from being scheduled. Even when disabled, the job can be manually started from the console. - The database Id records should be 32/64 bit independent now. 64 bits can be enabled by changing one define and changing the appropriate table variable. Normally, you need 64 bits only for FileId. - Relative path specifications (i.e. ../xxx) are now permitted in the restore cd command. - When running multiple simultaneous jobs, most jobs that use spooling will now finish faster due to a mutex optimization made by Eric Bollengier. - Conf files containing UTF-8 marker at the head of the file as well as conf files containing Window cr/lf and Mac cr line termination characters are now accepted thanks to Robert Nelson. - Windows tray status windows are scrollable and resizable. - Win32 external script execution is much more flexible -- handles spaces in names better, ... - Lots of DVD fixes -- writing DVDs is now reported to work. - Fix opening of database in a restricted console to respect any Catalog ACL. - Much better automatic handling of multiple database catalogs in the restore command. - Permit multiple console/director resources in bconsole.conf. patch from Carsten Paeth calle@calle.in-berlin.de - Character substitution in Job/JobDefs WriteBootStrap. from Eric Bollengier. - Apply patch supplied in bug #656 to pass priority field in the run dialog to the Director in gnome console. - Add support of encrypted data stream to bscan from Eric. display data_len instead of data content (may be binary). - Add Enabled=xxx on update slots command. - Add host:port to connect failure messages to FD and SD from Dir/ - Add WhereACL to console ACL list. If nothing is specified, only the default is permitted for restore. Otherwise, *all* allows any path, or you can specify permitted paths. This should allow control over where users can restore files. This is untested. - Install man pages with 'make install'. - Add Media.Enabled flag to client backups for dotcmds.c - Enforce Media.Enabled=1 for a current restore to work - Require restore case 3 to have sqlquery permission to work. - Add -n option to bconsole to turn off conio -- used in bweb. - The bytes field in the terminated jobs part of the status command now reports in KB, MB, ... units. - When not descending into a directory, print the File= name that triggered it -- makes why not descending a bit clearer - Do not unload autochanger when doing "update slots" - Implement mount command for autochanger - Fix bug #462 incorrect error message printed when client script called from File= was not found. - Fix bug #558 (waiting for feedback) where Bacula needs too much time to do a rewind on Solaris when no tape is in the drive (Solaris does not have the detailed errno found on Linux). Added Solaris specific code. Note, this may apply to other OSes as well. - The examples directory has a new bacula_mail_summary.sh file that creates a single email summary of any number of jobs. Submitted by Andrew J. Millar. - Add nagios plugin to the examples directory. Submitted by Christian Masopust. - Modify most restore error messages to be queued so that they appear at the end of the job rather than mixed with the restore listing where they could be "lost". - Apply patch supplied by user (slightly modified) to fix correct detection of holes in block devices and FIFOs. Bug # 506. - Added a report.pl program to the examples directory from Jonas Bjorklund. - Add two new queries to query.sql provided by Arno. One list volumes known to the Storage device, and the other lists volumes possibly needing replacement (error, ...). - Implement new code for changing userid and group at startup. This should get Bacula into the correct groups. - Implement support for removable filesystems -- device type directive and mount, unmount directives. - Transfer rates are now presented in a more readable format thanks to a user submission. - SD is now aware of what volumes are mounted. More information is printed in the Status report. You must take much more care now to unmount devices prior to removing tapes that Bacula has open or prior to changing a magazine. Don't forget to do a mount afterwards or the device will be blocked. - The Pool Maximum Volumes directive is now respected in all places. - A Storage device can now be specified in a Pool resource. It will override all other Storage specifications. - Most but not all directives accept true/false in place of yes/no. - A patch from Karl Hakimian that reads JobIds, FileIndexes from a database table for restore. - There are a number of new tables. Some such as the Location table are designed for user use in doing Volume Management software. - Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to accept time qualifiers. - Implement jobuid to replace old usage of job in keywords as suggested by Eric Bollengier. - Implement write variables for Python to set Priority (anytime), and Job Level, only during JobInit event. - Use the keyword ujobid to mean the unique job id; job or jobname to mean the Job name given on the Name directive, and jobid to be the numeric (non-unique) job id. - Allow the SD to use multiple drives during a backup/restore (only one at a time). - Integrate addition of line count limitation to bsmtp -l from Sebastian Stark - Split the bacula start/start script into four files: bacula -- starts and stops calling other scripts bacula-ctl-dir -- starts/stops the director bacula-ctl-fd -- starts/stops the File daemon bacula-ctl-sd -- starts/stops the Storage daemon - Remove automatic case folding on Windows FDs. You must explicitly use the 'Ignore Case = yes' option. - Implement wild program in tools directory for testing wild-cards. Almost identical to the regex program. - Use the new bregex.c to implement Regex expressions on Win32. - Apply patch from Christopher Hull - Allow multiple connections to database with different parameters. - Invalidate the scheduler when doing a reload. Fixes seg fault, but still 60 second window. - Additional info in Reschedule message. - Use set_jcr_job_status() everywhere to prevent loss of cancel, error. - Display peer IP in FD if error from connecting DIR. - Don't increment file count for DIRBEGIN. - Replace illegal characters in Win32 filename by _. - Add SE_CREATE_PERMANENT_NAME privilege in Win32. - Hash hard link filenames rather than linked list (performance). - Fix for security failure in chdir on Win32. - Add CreateDirectoryA/W win32 API entry points. - programs to duplicate Bacula's base64 algorithm using standard routines. This fixes bugs #296, and 565. Patch submitted by author of bug #565. - Fixes to reloading the Dir conf file from Eric Bollengier and Christopher Hull. - Modify LICENSE to correct some problems pointed out by Debian. - Apply a patch submitted by cesarb in bug #606 to implement O_NOATIME support. O_NOATIME is a open() flag which makes it possible to read a file without updating the inode atime (and also without the inode ctime update which happens if you try to set the atime back to its previous value). It also prevents a race condition when two programs are reading the same file, but only one does not want to change the atime. It's most useful for backup programs and file integrity checkers (and bacula can fit on both categories). You enable it in the Bacula FileSet Options resource by setting: noatime = yes The effect of this option is similar to the keepatime option except it is more efficient and avoids modifying ctime. - Implement a pile of new man pages contributed by Jose Tallon. - Modify the database format for handling Migration jobs: Add PriorJobId, RealEndTime to Job table Delete MAC table Remove Stripe from JobMedia record (not used, wasting space) Add ScratchPoolId, RecyclePoolId, Enabled to Media record Add Cost to Location table. Enabled to Media table and Location table. - Security: harden authentication failure in FD by single threading errors and forcing a 6 second wait. - If using GCC (actually g++) add the following compiler flags -fno-strict-aliasing -fno-exceptions -fno-rtti - Turn on new bsnprintf() code. The reason for this code is to eliminate the security problems associated with using the system libraries print routines. - Implement job report that indicates where Storage and Pool came from -- with overrides and Pool storage and NextPool, it is all very complicated. - Add more detail (Storage, Device) to list of volumes printed for restore. - Add new VOLMGMT message class. No messages are yet sent with this class. - Improved Bacula rescue procedures -- see the Disaster Recovery chapter of the manual - Add spooling/despooling info in status output of SD. - Add Comment field to llist of a volume. - Allow true/false in many but not all yes/no directives. - The Bacula source code is now copyrighted by the Free Software Foundation Europe. The Developer's Guide documents the new procedures, and the LICENSE file has been updated. - Apply Jaime Ventura's patch that implements the Messages resource Mail On Success directive. - The Client returns its Version string, which is printed in the Job report. - The Client returns whether or not VSS and Encryption are used, which are printed in the Job report. Additional Features Added for Win32: - Added DriveType directive to the Director's Include Option FileSet resource. Allowed values are: fixed, removable, cdrom, and remote. There is only an implementation for Windows because it is the only platform that has the concept of drives. - Adds EnhancedWild directive to the Director's Include Option FileSet resource. Allowed values are: yes and no. When EnhancedWild is enabled then the processing of the Wild, WildDir and WildFile is changed in the following ways. Patterns conform to Posix \ is not a special character in character classification [] To match a - it must be the first or last character To match a ] it must be the first character fnmatch option FNM_FILE_NAME is specified * doesn't match a / so it won't match multiple directory levels in a path - Relative WildFile patterns (ones without a leading /) match against the filename portion. This in combination with the FNM_FILE_NAME fnmatch() flag makes directives such as WildFile = abc*.def work as expected. - Adds support for the shell's feature of brace expansion. Here is an example where braces allow 24 lines to be expressed in 5. # Exclude directories full of lots and lots of useless little files WildDir = "[A-Z]:/{Documents and Settings,{WINNT,Windows}/Profiles}/*/Cookies" WildDir = "[A-Z]:/{Documents and Settings,{WINNT,Windows}/Profiles}/*/Recent" WildDir = "[A-Z]:/{Documents and Settings,{WINNT,Windows}/Profiles}/*/{Local Settings,LOCALS~1}/History" WildDir = "[A-Z]:/{Documents and Settings,{WINNT,Windows}/Profiles}/*/{Local Settings,LOCALS~1}/Temp" WildDir = "[A-Z]:/{Documents and Settings,{WINNT,Windows}/Profiles}/*/{Local Settings,LOCALS~1}/Temporary Internet Files" ;;;