From: Kern Sibbald Date: Mon, 28 Aug 2017 16:20:08 +0000 (+0200) Subject: Remove reference to SQLite from manual X-Git-Tag: Release-9.0.4 X-Git-Url: https://git.sur5r.net/?p=bacula%2Fdocs;a=commitdiff_plain;h=5609d1d500b51fb41a957c047ccb4d79db7aa8d4 Remove reference to SQLite from manual --- diff --git a/docs/manuals/en/main/catmaintenance.tex b/docs/manuals/en/main/catmaintenance.tex index 0b8f2bb4..89500f1e 100644 --- a/docs/manuals/en/main/catmaintenance.tex +++ b/docs/manuals/en/main/catmaintenance.tex @@ -105,19 +105,19 @@ time you run a Job. \index[general]{Database!Compacting Your MySQL } \index[general]{Compacting Your MySQL Database } -Over time, as noted above, your database will tend to grow. I've noticed that -even though Bacula regularly prunes files, {\bf MySQL} does not effectively -use the space, and instead continues growing. To avoid this, from time to -time, you must compact your database. Normally, large commercial database such -as Oracle have commands that will compact a database to reclaim wasted file -space. MySQL has the {\bf OPTIMIZE TABLE} command that you can use, and SQLite -version 2.8.4 and greater has the {\bf VACUUM} command. We leave it to you to -explore the utility of the {\bf OPTIMIZE TABLE} command in MySQL. +Over time, as noted above, your database will tend to grow. I've noticed +that even though Bacula regularly prunes files, {\bf MySQL} does not +effectively use the space, and instead continues growing. To avoid this, +from time to time, you must compact your database. Normally, large +commercial database such as Oracle have commands that will compact a +database to reclaim wasted file space. MySQL has the {\bf OPTIMIZE TABLE} +command that you can use. We leave it to you to explore the utility of the +{\bf OPTIMIZE TABLE} command in MySQL. All database programs have some means of writing the database out in ASCII format and then reloading it. Doing so will re-create the database from scratch producing a compacted result, so below, we show you how you can do -this for MySQL, PostgreSQL and SQLite. +this for MySQL and PostgreSQL. For a {\bf MySQL} database, you could write the Bacula database as an ASCII file (bacula.sql) then reload it by doing the following: @@ -324,13 +324,6 @@ You may obtain significant performances by switching to the my-large.cnf or my-huge.cnf files that come with the MySQL source code. -For SQLite3, one significant factor in improving the performance is -to ensure that there is a "PRAGMA synchronous = NORMAL;" statement. -This reduces the number of times that the database flushes the in memory -cache to disk. There are other settings for this PRAGMA that can -give even further performance improvements at the risk of a database -corruption if your system crashes. - For PostgreSQL, you might want to consider turning fsync off. Of course doing so can cause corrupted databases in the event of a machine crash. There are many different ways that you can tune PostgreSQL, the @@ -442,29 +435,6 @@ CREATE INDEX Name on Filename (Name(255)); \normalsize -\subsection{SQLite Indexes} -On SQLite, you can check if you have the proper indexes by: - -\footnotesize -\begin{verbatim} -sqlite /bacula.db -select * from sqlite_master where type='index' and tbl_name='File'; -\end{verbatim} -\normalsize - -If the indexes are not present, especially the JobId index, you can -create them with the following commands: - -\footnotesize -\begin{verbatim} -sqlite /bacula.db -CREATE INDEX file_jobid_idx on File (JobId); -CREATE INDEX file_jfp_idx on File (JobId, PathId, FilenameId); -\end{verbatim} -\normalsize - - - \label{CompactingPostgres} \section{Compacting Your PostgreSQL Database} \index[general]{Database!Compacting Your PostgreSQL } @@ -509,51 +479,19 @@ Finally, you might want to look at the PostgreSQL documentation on this subject at \elink{http://www.postgresql.org/docs/8.1/interactive/maintenance.html}{http://www.postgresql.org/docs/8.1/interactive/maintenance.html}. -\section{Compacting Your SQLite Database} -\index[general]{Compacting Your SQLite Database } -\index[general]{Database!Compacting Your SQLite } - -First please read the previous section that explains why it is necessary to -compress a database. SQLite version 2.8.4 and greater have the {\bf Vacuum} -command for compacting the database. - -\footnotesize -\begin{verbatim} -cd {\bf working-directory} -echo 'vacuum;' | sqlite bacula.db -\end{verbatim} -\normalsize - -As an alternative, you can use the following commands, adapted to your system: - - -\footnotesize -\begin{verbatim} -cd {\bf working-directory} -echo '.dump' | sqlite bacula.db > bacula.sql -rm -f bacula.db -sqlite bacula.db < bacula.sql -rm -f bacula.sql -\end{verbatim} -\normalsize - -Where {\bf working-directory} is the directory that you specified in the -Director's configuration file. Note, in the case of SQLite, it is necessary to -completely delete (rm) the old database before creating a new compressed -version. - \section{Migrating from SQLite to MySQL or PostgreSQL} \index[general]{MySQL!Migrating from SQLite to } \index[general]{Migrating from SQLite to MySQL or PostgreSQL} -You may begin using Bacula with SQLite then later find that you want to switch -to MySQL or Postgres for any of a number of reasons: SQLite tends to use more -disk than MySQL; when the database is corrupted it is often more catastrophic -than with MySQL or PostgreSQL. Several users have succeeded in converting by -exporting the SQLite data and then processing it with Perl scripts prior to -putting it into MySQL or PostgreSQL. This is, however, not a simple process. -Scripts are available on bacula source distribution under -\texttt{examples/database}. +On some older Bacula you may begun using Bacula with SQLite then later find +that you want to switch to MySQL or Postgres for any of a number of +reasons: SQLite is no longer supported by Bacula; SQLite tends to use more +disk than MySQL; when the database is corrupted it is often more +catastrophic than with MySQL or PostgreSQL. Several users have succeeded in +converting by exporting the SQLite data and then processing it with Perl +scripts prior to putting it into MySQL or PostgreSQL. This is, however, not +a simple process. Scripts are available on bacula source distribution +under \texttt{examples/database}. \label{BackingUpBacula} \section{Backing Up Your Bacula Database} @@ -768,11 +706,3 @@ for each File that is saved, the database grows by approximately 150 bytes. This database has a total size of approximately 450 Megabytes. -If we were using SQLite, the determination of the total database size would be -much easier since it is a single file, but we would have less insight to the -size of the individual tables as we have in this case. - -Note, SQLite databases may be as much as 50\% larger than MySQL databases due -to the fact that all data is stored as ASCII strings. That is even binary -integers are stored as ASCII strings, and this seems to increase the space -needed. diff --git a/docs/manuals/en/main/dirdconf.tex b/docs/manuals/en/main/dirdconf.tex index ab3cda8d..03207544 100644 --- a/docs/manuals/en/main/dirdconf.tex +++ b/docs/manuals/en/main/dirdconf.tex @@ -3182,16 +3182,14 @@ the Pool currently being used by the job. \index[general]{Catalog Resource} The Catalog Resource defines what catalog to use for the current job. -Currently, Bacula can only handle a single database server (SQLite, MySQL, +Currently, Bacula can only handle a single database server (MySQL or PostgreSQL) that is defined when configuring {\bf Bacula}. However, there may be as many Catalogs (databases) defined as you wish. For example, you may want each Client to have its own Catalog database, or you may want backup jobs to use one database and verify or restore jobs to use another database. -Since SQLite is compiled in, it always runs on the same machine -as the Director and the database must be directly accessible (mounted) from -the Director. However, since both MySQL and PostgreSQL are networked +Since both MySQL and PostgreSQL are networked databases, they may reside either on the same machine as the Director or on a different machine on the network. See below for more details. @@ -3237,7 +3235,7 @@ defined. \index[dir]{DB Socket} \index[dir]{Directive!DB Socket} This is the name of a socket to use on the local host to connect to the - database. This directive is used only by MySQL and is ignored by SQLite. + database. This directive is used only by MySQL. Normally, if neither {\bf DB Socket} or {\bf DB Address} are specified, MySQL will use the default socket. If the DB Socket is specified, the MySQL server must reside on the same machine as the Director. @@ -3248,7 +3246,7 @@ defined. This is the host address of the database server. Normally, you would specify this instead of {\bf DB Socket} if the database server is on another machine. In that case, you will also specify {\bf DB Port}. This directive is used - only by MySQL and PostgreSQL and is ignored by SQLite if provided. + only by MySQL and PostgreSQL. This directive is optional. \item [DB Port = \lt{}port\gt{}] @@ -3256,7 +3254,7 @@ defined. \index[dir]{Directive!DBPort} This defines the port to be used in conjunction with {\bf DB Address} to access the database if it is on another machine. This directive is used only - by MySQL and PostgreSQL and is ignored by SQLite if provided. This + by MySQL and PostgreSQL. directive is optional. %% \item [Multiple Connections = \lt{}yes\vb{}no\gt{}] @@ -3267,14 +3265,14 @@ the %% same Catalog will use a single connection to the catalog. It will be shared, %% and Bacula will allow only one Job at a time to communicate. If you set this %% directive to yes, Bacula will permit multiple connections to the database, -%% and the database must be multi-thread capable. For SQLite and PostgreSQL, +%% and the database must be multi-thread capable. For and PostgreSQL, %% this is no problem. For MySQL, you must be *very* careful to have the %% multi-thread version of the client library loaded on your system. When this %% directive is set yes, each Job will have a separate connection to the %% database, and the database will control the interaction between the different %% Jobs. This can significantly speed up the database operations if you are -%% running multiple simultaneous jobs. In addition, for SQLite and PostgreSQL, +%% running multiple simultaneous jobs. In addition, for and PostgreSQL, %% Bacula will automatically enable transactions. This can significantly speed %% up insertion of attributes in the database either for a single Job or %% multiple simultaneous Jobs. @@ -3290,7 +3288,7 @@ The following is an example of a valid Catalog resource definition: \begin{verbatim} Catalog { - Name = SQLite + Name = MySQL dbname = bacula; user = bacula; password = "" # no password = no security diff --git a/docs/manuals/en/main/general.tex b/docs/manuals/en/main/general.tex index 6c105cf6..7db218f9 100644 --- a/docs/manuals/en/main/general.tex +++ b/docs/manuals/en/main/general.tex @@ -135,14 +135,14 @@ Director, Console, File, Storage, and Monitor services. tar and bru, because the catalog maintains a record of all Volumes used, all Jobs run, and all Files saved, permitting efficient restoration and Volume management. Bacula currently supports three different databases, - MySQL, PostgreSQL, and SQLite, one of which must be chosen when building + MySQL, and PostgreSQL one of which must be chosen when building Bacula. - The three SQL databases currently supported (MySQL, PostgreSQL or - SQLite) provide quite a number of features, including rapid indexing, + The two SQL databases currently supported (MySQL, and PostgreSQL) + provide quite a number of features, including rapid indexing, arbitrary queries, and security. Although the Bacula project plans to support other major SQL databases, the current Bacula implementation interfaces only - to MySQL, PostgreSQL and SQLite. For the technical and porting details + to MySQL, and PostgreSQL. For the technical and porting details see the Catalog Services Design Document in the developer's documented. The packages for MySQL and PostgreSQL are available for several operating @@ -154,9 +154,6 @@ Director, Console, File, Storage, and Monitor services. document for the details. For more information on PostgreSQL, please see: \elink{www.postgresql.org}{http://www.postgresql.org}. - Configuring and building SQLite is even easier. For the details of - configuring SQLite, please see the \ilink{Installing and Configuring SQLite}{SqlLiteChapter} chapter of this document. - \subsection*{Bacula Monitor} \label{MonDef} A Bacula Monitor service is the program that allows the @@ -168,7 +165,7 @@ Director, Console, File, Storage, and Monitor services. To perform a successful save or restore, the following four daemons must be configured and running: the Director daemon, the File daemon, the Storage - daemon, and the Catalog service (MySQL, PostgreSQL or SQLite). + daemon, and the Catalog service (MySQL, or PostgreSQL). \section{Bacula Configuration} \index[general]{Configuration!Bacula } diff --git a/docs/manuals/en/main/install.tex b/docs/manuals/en/main/install.tex index 356a6ff9..bee20c6c 100644 --- a/docs/manuals/en/main/install.tex +++ b/docs/manuals/en/main/install.tex @@ -8,8 +8,8 @@ In general, you will need the Bacula source release, and if you want to run a Windows client, you will need the Bacula Windows binary release. -However, Bacula needs certain third party packages (such as {\bf MySQL}, -{\bf PostgreSQL}, or {\bf SQLite} to build and run +However, Bacula needs certain third party packages (such as {\bf MySQL} or +{\bf PostgreSQL} to build and run properly depending on the options you specify. Normally, {\bf MySQL} and {\bf PostgreSQL} are packages that can be installed on your distribution. However, if you do @@ -272,7 +272,6 @@ to time, the current makeup is the following: \hline \multicolumn{1}{|c| }{\bf 3rd Party Package} & \multicolumn{1}{c| }{\bf depkgs} & \multicolumn{1}{c| }{\bf depkgs-qt} \\ - \hline {SQLite3 } & \multicolumn{1}{c| }{X } & \multicolumn{1}{c| }{ }\\ \hline {mtx } & \multicolumn{1}{c| }{X } & \multicolumn{1}{c| }{ } \\ \hline {qt4 } & \multicolumn{1}{c| }{ } & \multicolumn{1}{c| }{X } \\ \hline @@ -288,11 +287,11 @@ Alternatively, you can make just the packages that are needed. For example, \footnotesize \begin{verbatim} cd bacula/depkgs -make sqlite +make qt4 \end{verbatim} \normalsize -will configure and build only the SQLite package. +will configure and build only the QT4 package. You should build the packages that you will require in {\bf depkgs} a prior to configuring and building Bacula, since Bacula will need @@ -345,7 +344,7 @@ build Qt4 using {\bf depkgs-qt}, you must source the {\bf qt4-paths} file included in the package prior to building Bacula. Please read the INSTALL file for more details. -Even if you do not use SQLite, you might find it worthwhile to build {\bf mtx} +You might find it worthwhile to build {\bf mtx} because the {\bf tapeinfo} program that comes with it can often provide you with valuable information about your SCSI tape drive (e.g. compression, min/max block sizes, ...). Note, most distros provide {\bf mtx} as part of @@ -395,9 +394,6 @@ The basic installation is rather simple. can skip this phase provided that you have built the thread safe libraries. And you have already installed the additional rpms noted above. - SQLite is not supported on Solaris. This is because it - frequently fails with bus errors. However SQLite3 may work. - \item Detar the Bacula source code preferably into the {\bf bacula} directory discussed above. @@ -468,7 +464,6 @@ continue on. \ilink{Installing and Configuring MySQL Phase II}{mysql_phase2} or create the Bacula PostgreSQL database and tables \ilink{Configuring PostgreSQL II}{PostgreSQL_configure} or alternatively if you are using - SQLite \ilink{Installing and Configuring SQLite Phase II}{phase2}. \item Start Bacula ({\bf ./bacula start}) Note. the next chapter shows you how to do this in detail. @@ -612,26 +607,12 @@ support it. \index[general]{What Database to Use?} \index[general]{Use!What Database to} -Before building Bacula you need to decide if you want to use SQLite, MySQL, or -PostgreSQL. If you are not already running MySQL or PostgreSQL, you might -want to start by testing with SQLite (not supported on Solaris). -This will greatly simplify the setup for you -because SQLite is compiled into Bacula an requires no administration. It -performs well and is suitable for small to medium sized installations (maximum -10-20 machines). However, we should note that a number of users have -had unexplained database corruption with SQLite. For that reason, we -recommend that you install either PostgreSQL or MySQL for production -work. - If you wish to use MySQL as the Bacula catalog, please see the \ilink{Installing and Configuring MySQL}{MySqlChapter} chapter of this manual. You will need to install MySQL prior to continuing with the configuration of Bacula. MySQL is a high quality database that is very efficient and is suitable for small and medium sized installation (up to -2,000,000 files per job). It is slightly more complicated than SQLite to setup -and administer because it has a number of sophisticated features such as -userids and passwords. It runs as a separate process, is truly professional and -can manage a database of any size. +2,000,000 files per job). If you wish to use PostgreSQL as the Bacula catalog, please see the \ilink{Installing and Configuring PostgreSQL}{PostgreSqlChapter} chapter of @@ -644,12 +625,7 @@ to install and maintain. PostgreSQL is suitable for any sized installation many optimized PostgreSQL functions, and can run more than 10 time faster on jobs having millions of files than MySQL (Specially in during restore, accurate mode, bvfs queries and when the database server is not on the same host than -the Director). It's possible to switch from MySQL/SQLite to PostgreSQL, but it -requires some DBA knowledge. - -If you wish to use SQLite as the Bacula catalog, please see -\ilink{Installing and Configuring SQLite}{SqlLiteChapter} chapter of -this manual. SQLite is not supported on Solaris. +the Director). \section{Quick Start} \index[general]{Quick Start} @@ -786,10 +762,7 @@ customize your installation. thread safe. If you find that batch mode is not enabled on your Bacula installation, then your database most likely does not support threads. - SQLite2 is not thread safe. Batch insert cannot be enabled when using - SQLite2 - - On most systems, MySQL, PostgreSQL and SQLite3 are thread safe. + On most systems, MySQL and PostgreSQLare thread safe. To verify that your PostgreSQL is thread safe, you can try this (change the path to point to your particular installed libpq.a; @@ -977,14 +950,6 @@ $ nm /usr/local/lib/libpq.a | grep mutex explicitly need to use this option so that Bacula does not attempt to reference OS function calls that do not exist. -\item [ {-}{\-}with-sqlite3=\lt{}sqlite3-path\gt{}] - \index[general]{{-}{\-}with-sqlite3} - This enables use of the SQLite version 3.x database. The {\bf - sqlite3-path} is not normally specified as Bacula looks for the - necessary components in a standard location ({\bf depkgs/sqlite3}). See - \ilink{Installing and Configuring SQLite}{SqlLiteChapter} chapter of - this manual for more details. SQLite3 is not supported on Solaris. - \item [ {-}{\-}with-mysql=\lt{}mysql-path\gt{}] \index[general]{{-}{\-}with-mysql} This enables building of the Catalog services for Bacula. It assumes @@ -1003,12 +968,9 @@ $ nm /usr/local/lib/libpq.a | grep mutex simply use {\bf {-}{\-}with-postgresql}. Note, for Bacula to be configured properly, you must specify one - of the three database options supported. That is: - {-}{\-}with-sqlite3, {-}{\-}with-mysql, or + of the two database options supported. That is: {-}{\-}with-postgresql, otherwise the ./configure will fail. \smallskip - Note: SQLite is no longer supported. The code remains in Bacula but - we no longer test it. \item [ {-}{\-}with-openssl=\lt{}path\gt{}] @@ -1279,24 +1241,6 @@ running Bacula for the first time. \section{Red Hat} \index[general]{Red Hat} -Using SQLite: - -\footnotesize -\begin{verbatim} - -CFLAGS="-g -Wall" ./configure \ - --sbindir=/opt/bacula/bin \ - --sysconfdir=/opt/bacula/etc \ - --enable-smartalloc \ - --with-sqlite=$HOME/bacula/depkgs/sqlite \ - --with-working-dir=/opt/bacula/working \ - --with-pid-dir=/opt/bacula/working \ - --with-subsys-dir=/opt/bacula/working \ - --enable-bat \ - --enable-readline -\end{verbatim} -\normalsize - or \footnotesize @@ -1510,7 +1454,7 @@ fresh copy of the source tree, or using {\bf make\ distclean} before the {\bf ./configure}. Since the File daemon does not access the Catalog database, you can remove -the {\bf \verb:--:with-mysql} or {\bf \verb:--:with-sqlite} options, then +the {\bf \verb:--:with-mysql} ption, then add {\bf \verb:--:enable-client-only}. This will compile only the necessary libraries and the client programs and thus avoids the necessity of installing one or another of those database programs to build the File @@ -1620,8 +1564,7 @@ going to run it to backup your system. After doing a {\bf make install} the following files will be installed on your system (more or less). The exact files and location (directory) for each file -depends on your {\bf ./configure} command (e.g. if you are using SQLite instead -of MySQL, some of the files will be different). +depends on your {\bf ./configure} command. NOTE: it is quite probable that this list is out of date. But it is a starting point. diff --git a/docs/manuals/en/main/main.tex b/docs/manuals/en/main/main.tex index fbef017e..d505e63e 100644 --- a/docs/manuals/en/main/main.tex +++ b/docs/manuals/en/main/main.tex @@ -93,7 +93,7 @@ lscape,pdfpages,ifthen,setspace,colortbl,diagbox} \include{mysql} % catalog \include{postgresql} % catalog -\include{sqlite} % catalog +%\include{sqlite} % catalog \include{catmaintenance} %catalog \include{tapetesting} % install diff --git a/docs/manuals/en/main/newfeatures.tex b/docs/manuals/en/main/newfeatures.tex index 6cb94057..d8a04341 100644 --- a/docs/manuals/en/main/newfeatures.tex +++ b/docs/manuals/en/main/newfeatures.tex @@ -633,7 +633,7 @@ Messages { The new \texttt{.estimate} command can be used to get statistics about a job to run. The command uses the database to approximate the size and the number of files of the next job. On a PostgreSQL database, the command -uses regression slope to compute values. On SQLite or MySQL, where these +uses regression slope to compute values. On MySQL, where these statistical functions are not available, the command uses a simple ``average'' estimation. The correlation number is given for each value. @@ -3262,7 +3262,6 @@ same time by including multiple database options at the same time. ./configure can be run with multiple database configure options. \begin{verbatim} - --with-sqlite3 --with-mysql --with-postgresql \end{verbatim} @@ -3271,7 +3270,6 @@ Order of testing for databases is: \begin{itemize} \item postgresql \item mysql -\item sqlite3 \end{itemize} Each configured backend generates a file named: @@ -3319,12 +3317,10 @@ database specific internals and make sure we have a more stable generic interface with the rest of SQL code. From now on there is a strict boundary between the SQL code and the low-level database functions. This new interface should also make it easier to add a new backend for a -currently unsupported database. As part of the rewrite the SQLite 2 code -was removed (e.g. only SQLite 3 is now supported). An extra bonus of the -new code is that you can configure multiple backends in the configure and -build all backends in one compile session and select the correct database -backend at install time. This should make it a lot easier for packages -maintainers. +currently unsupported database. An extra bonus of the new code is that you +can configure multiple backends in the configure and build all backends in +one compile session and select the correct database backend at install +time. This should make it a lot easier for packages maintainers. @@ -3877,7 +3873,7 @@ The following items have been \textbf{deprecated} for a long time, and are now removed from the code. \begin{itemize} \item Gnome console -\item Support for SQLite 2 +\item Support for SQLite \end{itemize} \subsection{Misc Changes} @@ -5088,7 +5084,7 @@ will not be added to the estimate total that is displayed. \subsection{libdbi Framework} \index[general]{libdbi Framework} As a general guideline, Bacula has support for a few catalog database drivers -(MySQL, PostgreSQL, SQLite) +(MySQL and PostgreSQL) coded natively by the Bacula team. With the libdbi implementation, which is a Bacula driver that uses libdbi to access the catalog, we have an open field to use many different kinds database engines following the needs of users. @@ -5120,8 +5116,6 @@ Some of benefits of using libdbi are: \begin{itemize} \item PostgreSQL, with and without batch insert \item Mysql, with and without batch insert - \item SQLite - \item SQLite3 \end{itemize} In the future, we will test and approve to use others databases engines @@ -5145,7 +5139,7 @@ Catalog { The parameter {\bf dbdriver} indicates that we will use the driver dbi with a mysql database. Currently the drivers supported by Bacula are: postgresql, -mysql, sqlite, sqlite3; these are the names that may be added to string "dbi:". +amd mysql; these are the names that may be added to string "dbi:". The following limitations apply when Bacula is set to use the libdbi framework: - Not tested on the Win32 platform @@ -5545,7 +5539,7 @@ text based format. This is useful to backup it in a secure way. \begin{verbatim} $ dbcheck -B catalog=MyCatalog - db_type=SQLite + db_type=MySQL db_name=regress db_driver= db_user=regress diff --git a/docs/manuals/en/main/requirements.tex b/docs/manuals/en/main/requirements.tex index 1ce5983e..e2fb699f 100644 --- a/docs/manuals/en/main/requirements.tex +++ b/docs/manuals/en/main/requirements.tex @@ -25,7 +25,6 @@ \begin{itemize} \item MySQL 4.1 \item PostgreSQL 7.4 - \item SQLite 3 \end{itemize} \item If you want to build the Win32 binaries, please see the diff --git a/docs/manuals/en/main/rescue.tex b/docs/manuals/en/main/rescue.tex index 4f9d484f..1832010c 100644 --- a/docs/manuals/en/main/rescue.tex +++ b/docs/manuals/en/main/rescue.tex @@ -377,8 +377,8 @@ myself. To do so, you might want to consider the following steps: the bootstrap file. \item If you have the Bootstrap file, you should now be back up and running, if you do not have a Bootstrap file, continue with the suggestions below. -\item Using {\bf bscan} scan the last set of backup tapes into your MySQL, - PostgreSQL or SQLite database. +\item Using {\bf bscan} scan the last set of backup tapes into your MySQL + or PostgreSQL database. \item Start Bacula, and using the Console {\bf restore} command, restore the last valid copy of the Bacula database and the Bacula configuration files. diff --git a/docs/manuals/en/main/restore.tex b/docs/manuals/en/main/restore.tex index 198d6070..00009d10 100644 --- a/docs/manuals/en/main/restore.tex +++ b/docs/manuals/en/main/restore.tex @@ -1119,10 +1119,10 @@ on restoring a \ilink{Client}{restore_client} and your \item[Problem] My database is broken. \item[Solution] - For SQLite, use the vacuum command to try to fix the database. For either - MySQL or PostgreSQL, see the vendor's documentation. They have specific tools - that check and repair databases, see the \ilink{database repair}{DatabaseRepair} sections of this manual for links to vendor - information. + For either MySQL or PostgreSQL, see the vendor's documentation. They + have specific tools that check and repair databases, see the + \ilink{database repair}{DatabaseRepair} sections of this manual for + links to vendor information. Assuming the above does not resolve the problem, you will need to restore or rebuild your catalog. Note, if it is a matter of some