From 3f2576c1f800f4f2dbf09b2b039faa4f5e37cfde Mon Sep 17 00:00:00 2001 From: Kern Sibbald Date: Sat, 2 Jun 2012 13:15:22 +0200 Subject: [PATCH] Add new Spanish ansi-labels from Jose Herrera --- docs/manuals/es/main/ansi-labels-en.tex | 58 ------------------------- docs/manuals/es/main/ansi-labels-es.tex | 57 ++++++++++++++++++++++++ docs/manuals/es/main/main.tex | 2 +- 3 files changed, 58 insertions(+), 59 deletions(-) delete mode 100644 docs/manuals/es/main/ansi-labels-en.tex create mode 100644 docs/manuals/es/main/ansi-labels-es.tex diff --git a/docs/manuals/es/main/ansi-labels-en.tex b/docs/manuals/es/main/ansi-labels-en.tex deleted file mode 100644 index 7d6e14fe..00000000 --- a/docs/manuals/es/main/ansi-labels-en.tex +++ /dev/null @@ -1,58 +0,0 @@ - -\chapter{ANSI and IBM Tape Labels} -\label{AnsiLabelsChapter} -\index[general]{ANSI and IBM Tape Labels} -\index[general]{Labels!Tape} - -Bacula supports ANSI or IBM tape labels as long as you -enable it. In fact, with the proper configuration, you can -force Bacula to require ANSI or IBM labels. - -Bacula can create an ANSI or IBM label, but if Check Labels is -enabled (see below), Bacula will look for an existing label, and -if it is found, it will keep the label. Consequently, you -can label the tapes with programs other than Bacula, and Bacula -will recognize and support them. - -Even though Bacula will recognize and write ANSI and IBM labels, -it always writes its own tape labels as well. - -When using ANSI or IBM tape labeling, you must restrict your Volume -names to a maximum of six characters. - -If you have labeled your Volumes outside of Bacula, then the -ANSI/IBM label will be recognized by Bacula only if you have created -the HDR1 label with {\bf BACULA.DATA} in the Filename field (starting -with character 5). If Bacula writes the labels, it will use -this information to recognize the tape as a Bacula tape. This allows -ANSI/IBM labeled tapes to be used at sites with multiple machines -and multiple backup programs. - - -\section{Director Pool Directive} - -\begin{description} -\item [ Label Type = ANSI | IBM | Bacula] - This directive is implemented in the Director Pool resource and in the SD Device - resource. If it is specified in the SD Device resource, it will take - precedence over the value passed from the Director to the SD. The default - is Label Type = Bacula. -\end{description} - -\section{Storage Daemon Device Directives} - -\begin{description} -\item [ Label Type = ANSI | IBM | Bacula] - This directive is implemented in the Director Pool resource and in the SD Device - resource. If it is specified in the the SD Device resource, it will take - precedence over the value passed from the Director to the SD. - -\item [Check Labels = yes | no] - This directive is implemented in the the SD Device resource. If you intend - to read ANSI or IBM labels, this *must* be set. Even if the volume is - not ANSI labeled, you can set this to yes, and Bacula will check the - label type. Without this directive set to yes, Bacula will assume that - labels are of Bacula type and will not check for ANSI or IBM labels. - In other words, if there is a possibility of Bacula encountering an - ANSI/IBM label, you must set this to yes. -\end{description} diff --git a/docs/manuals/es/main/ansi-labels-es.tex b/docs/manuals/es/main/ansi-labels-es.tex new file mode 100644 index 00000000..1b16b02a --- /dev/null +++ b/docs/manuals/es/main/ansi-labels-es.tex @@ -0,0 +1,57 @@ + +\chapter{Etiquetas de cintas ANSI e IBM} +\label{AnsiLabelsChapter} +\index[general]{ANSI and IBM Tape Labels} +\index[general]{Labels!Tape} + +Bacula soporta etiquetas de cintas ANSI e IBM si se requieren. +De hecho, con la configuración apropiada, se puede forzar +a Bacula para que exija etiquetas IBM o ANSI. + +Bacula puede crear una etiqueta ANSI o IBM, pero si Check Labels +está habilitado (véase mas adelante), Bacula buscará una etiqueta existente, y +si la consigue, mantendrá dicha etiqueta. Por consiguiente, se pueden +etiquetar las cintas con otros programas, y Bacula los reconocerá +y soportará. + +Incluso, aunque Bacula reconocerá y escribirá etiquetas ANSI e IBM, +también escribe sus propias etiquetas a los tapes. + +Cuando se utiliza el etiquetado ANSI o IBM, se deben restringir +los nombres de volúmenes a un máximo de seis caracteres. + +Si ud etiquetó sus volúmenes fuera de Bacula, entonces la +etiqueta ANSI/IBM únicamente será reconocida si se creó la etiqueta +HDR1 con {\bf BACULA.DATA} en el campo Filename (iniciando con +el carácter 5). Si Bacula escribe las etiquetas, utilizará +esta información para reconocer la cinta como un tape de Bacula. +Esto permite a las cintas etiquetadas como ANSI/IBM, ser utilizadas en +sitios con múltiples máquinas y diferentes programas de respaldo. + +\section{Directiva Director Pool} + +\begin{description} +\item [ Label Type = ANSI | IBM | Bacula] + Esta diretiva es implementada en el recurso Director Pool y SD Device. + Si es especificada en el recurso SD Device, esta tendrá precedencia + sobre el valor pasado del Director al SD. El valor por defecto es + Label Type = Bacula. +\end{description} + +\section{Directivas del dispositivo de Storage Daemon} + +\begin{description} +\item [ Label Type = ANSI | IBM | Bacula] + Esta diretiva es implementada en el recurso Director Pool y SD Device. + Si es especificada en el recurso SD Device, esta tendrá precedencia + sobre el valor pasado del Director al SD. + +\item [Check Labels = yes | no] + Esta directiva se implementa en el recurso SD Device. Si se intenta + leer etiquetas ANSI o IBM, esta *debe* estar establecida. Incluso si el volumen + no está etiquetado como ANSI, se puede cambiar a yes, y Bacula chequeará el + tipo de etiqueta. Sin esta directiva definida como yes, Bacula asumirá que + las etiquetas son de tipo Bacula y no verificará si son ANSI o IBM. + En otras palabras, si hay alguna posibilidad que Bacula se encuentre con + una etiqueta ANSI/IBM, este valor debe estar en yes. +\end{description} \ No newline at end of file diff --git a/docs/manuals/es/main/main.tex b/docs/manuals/es/main/main.tex index ecf6c2ed..4538ede8 100644 --- a/docs/manuals/es/main/main.tex +++ b/docs/manuals/es/main/main.tex @@ -81,7 +81,7 @@ \include{supportedchangers-es} \include{spooling-en} \include{statistics-en} -\include{ansi-labels-en} +\include{ansi-labels-es} \include{win32-en} \include{rescue-en} \include{tls-en} -- 2.39.2