+++ /dev/null
-/*\r
- * FreeRTOS Kernel V10.2.1\r
- * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved.\r
- *\r
- * Permission is hereby granted, free of charge, to any person obtaining a copy of\r
- * this software and associated documentation files (the "Software"), to deal in\r
- * the Software without restriction, including without limitation the rights to\r
- * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of\r
- * the Software, and to permit persons to whom the Software is furnished to do so,\r
- * subject to the following conditions:\r
- *\r
- * The above copyright notice and this permission notice shall be included in all\r
- * copies or substantial portions of the Software.\r
- *\r
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR\r
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS\r
- * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR\r
- * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER\r
- * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN\r
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.\r
- *\r
- * http://www.FreeRTOS.org\r
- * http://aws.amazon.com/freertos\r
- *\r
- * 1 tab == 4 spaces!\r
- */\r
-\r
-#ifndef FREERTOS_CONFIG_H\r
-#define FREERTOS_CONFIG_H\r
-\r
-/*-----------------------------------------------------------\r
- * Application specific definitions.\r
- *\r
- * These definitions should be adjusted for your particular hardware and\r
- * application requirements.\r
- *\r
- * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE\r
- * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.\r
- * http://www.freertos.org/a00110.html\r
- *\r
- * The bottom of this file contains some constants specific to running the UDP\r
- * stack in this demo. Constants specific to FreeRTOS+TCP itself (rather than\r
- * the demo) are contained in FreeRTOSIPConfig.h.\r
- *----------------------------------------------------------*/\r
-#define configUSE_PREEMPTION 1\r
-#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1\r
-#define configMAX_PRIORITIES ( 7 )\r
-#define configTICK_RATE_HZ ( 1000 ) /* In this non-real time simulated environment the tick frequency has to be at least a multiple of the Win32 tick frequency, and therefore very slow. */\r
-#define configMINIMAL_STACK_SIZE ( ( unsigned short ) 60 ) /* In this simulated case, the stack only has to hold one small structure as the real stack is part of the Win32 thread. */\r
-#define configTOTAL_HEAP_SIZE ( ( size_t ) ( 2048U * 1024U ) )\r
-#define configMAX_TASK_NAME_LEN ( 15 )\r
-#define configUSE_TRACE_FACILITY 1\r
-#define configUSE_16_BIT_TICKS 0\r
-#define configIDLE_SHOULD_YIELD 1\r
-#define configUSE_CO_ROUTINES 0\r
-#define configUSE_MUTEXES 1\r
-#define configUSE_RECURSIVE_MUTEXES 1\r
-#define configQUEUE_REGISTRY_SIZE 0\r
-#define configUSE_APPLICATION_TASK_TAG 0\r
-#define configUSE_COUNTING_SEMAPHORES 1\r
-#define configUSE_ALTERNATIVE_API 0\r
-#define configNUM_THREAD_LOCAL_STORAGE_POINTERS 0\r
-#define configENABLE_BACKWARD_COMPATIBILITY 1\r
-#define configSUPPORT_STATIC_ALLOCATION 1\r
-\r
-/* Hook function related definitions. */\r
-#define configUSE_TICK_HOOK 0\r
-#define configUSE_IDLE_HOOK 0\r
-#define configUSE_MALLOC_FAILED_HOOK 0\r
-#define configCHECK_FOR_STACK_OVERFLOW 0 /* Not applicable to the Win32 port. */\r
-\r
-/* Software timer related definitions. */\r
-#define configUSE_TIMERS 1\r
-#define configTIMER_TASK_PRIORITY ( configMAX_PRIORITIES - 1 )\r
-#define configTIMER_QUEUE_LENGTH 5\r
-#define configTIMER_TASK_STACK_DEPTH ( configMINIMAL_STACK_SIZE * 2 )\r
-\r
-/* Event group related definitions. */\r
-#define configUSE_EVENT_GROUPS 1\r
-\r
-/* Run time stats gathering definitions. */\r
-#define configGENERATE_RUN_TIME_STATS 0\r
-\r
-/* Co-routine definitions. */\r
-#define configUSE_CO_ROUTINES 0\r
-#define configMAX_CO_ROUTINE_PRIORITIES ( 2 )\r
-\r
-/* Set the following definitions to 1 to include the API function, or zero\r
-to exclude the API function. */\r
-#define INCLUDE_vTaskPrioritySet 1\r
-#define INCLUDE_uxTaskPriorityGet 1\r
-#define INCLUDE_vTaskDelete 1\r
-#define INCLUDE_vTaskCleanUpResources 0\r
-#define INCLUDE_vTaskSuspend 1\r
-#define INCLUDE_vTaskDelayUntil 1\r
-#define INCLUDE_vTaskDelay 1\r
-#define INCLUDE_uxTaskGetStackHighWaterMark 1\r
-#define INCLUDE_xTaskGetSchedulerState 1\r
-#define INCLUDE_xTimerGetTimerTaskHandle 0\r
-#define INCLUDE_xTaskGetIdleTaskHandle 0\r
-#define INCLUDE_xQueueGetMutexHolder 1\r
-#define INCLUDE_eTaskGetState 1\r
-#define INCLUDE_xEventGroupSetBitsFromISR 1\r
-#define INCLUDE_xTimerPendFunctionCall 1\r
-#define INCLUDE_pcTaskGetTaskName 1\r
-\r
-/* This demo makes use of one or more example stats formatting functions. These\r
-format the raw data provided by the uxTaskGetSystemState() function in to human\r
-readable ASCII form. See the notes in the implementation of vTaskList() within\r
-FreeRTOS/Source/tasks.c for limitations. configUSE_STATS_FORMATTING_FUNCTIONS\r
-is set to 2 so the formatting functions are included without the stdio.h being\r
-included in tasks.c. That is because this project defines its own sprintf()\r
-functions. */\r
-#define configUSE_STATS_FORMATTING_FUNCTIONS 1\r
-\r
-/* Assert call defined for debug builds. */\r
-#ifdef _DEBUG\r
- extern void vAssertCalled( const char *pcFile, uint32_t ulLine );\r
- #define configASSERT( x ) if( ( x ) == 0 ) vAssertCalled( __FILE__, __LINE__ )\r
-#endif /* _DEBUG */\r
-\r
-\r
-\r
-/* Application specific definitions follow. **********************************/\r
-\r
-/* Only used when running in the FreeRTOS Windows simulator. Defines the\r
-priority of the task used to simulate Ethernet interrupts. */\r
-#define configMAC_ISR_SIMULATOR_PRIORITY ( configMAX_PRIORITIES - 1 )\r
-\r
-/* This demo creates a virtual network connection by accessing the raw Ethernet\r
-or WiFi data to and from a real network connection. Many computers have more\r
-than one real network port, and configNETWORK_INTERFACE_TO_USE is used to tell\r
-the demo which real port should be used to create the virtual port. The ports\r
-available are displayed on the console when the application is executed. For\r
-example, on my development laptop setting configNETWORK_INTERFACE_TO_USE to 4\r
-results in the wired network being used, while setting\r
-configNETWORK_INTERFACE_TO_USE to 2 results in the wireless network being\r
-used. */\r
-#define configNETWORK_INTERFACE_TO_USE 4L\r
-\r
-/* The address of an echo server that will be used by the two demo echo client\r
-tasks.\r
-http://www.freertos.org/FreeRTOS-Plus/FreeRTOS_Plus_TCP/TCP_Echo_Clients.html\r
-http://www.freertos.org/FreeRTOS-Plus/FreeRTOS_Plus_TCP/UDP_Echo_Clients.html */\r
-#define configECHO_SERVER_ADDR0 192\r
-#define configECHO_SERVER_ADDR1 168\r
-#define configECHO_SERVER_ADDR2 0\r
-#define configECHO_SERVER_ADDR3 11\r
-\r
-/* Default MAC address configuration. The demo creates a virtual network\r
-connection that uses this MAC address by accessing the raw Ethernet/WiFi data\r
-to and from a real network connection on the host PC. See the\r
-configNETWORK_INTERFACE_TO_USE definition above for information on how to\r
-configure the real network connection to use. */\r
-#define configMAC_ADDR0 0x00\r
-#define configMAC_ADDR1 0x11\r
-#define configMAC_ADDR2 0x22\r
-#define configMAC_ADDR3 0x33\r
-#define configMAC_ADDR4 0x44\r
-#define configMAC_ADDR5 0x41\r
-\r
-/* Default IP address configuration. Used in ipconfigUSE_DNS is set to 0, or\r
-ipconfigUSE_DNS is set to 1 but a DNS server cannot be contacted. */\r
-#define configIP_ADDR0 10\r
-#define configIP_ADDR1 10\r
-#define configIP_ADDR2 10\r
-#define configIP_ADDR3 200\r
-\r
-/* Default gateway IP address configuration. Used in ipconfigUSE_DNS is set to\r
-0, or ipconfigUSE_DNS is set to 1 but a DNS server cannot be contacted. */\r
-#define configGATEWAY_ADDR0 10\r
-#define configGATEWAY_ADDR1 10\r
-#define configGATEWAY_ADDR2 10\r
-#define configGATEWAY_ADDR3 1\r
-\r
-/* Default DNS server configuration. OpenDNS addresses are 208.67.222.222 and\r
-208.67.220.220. Used in ipconfigUSE_DNS is set to 0, or ipconfigUSE_DNS is set\r
-to 1 but a DNS server cannot be contacted.*/\r
-#define configDNS_SERVER_ADDR0 208\r
-#define configDNS_SERVER_ADDR1 67\r
-#define configDNS_SERVER_ADDR2 222\r
-#define configDNS_SERVER_ADDR3 222\r
-\r
-/* Default netmask configuration. Used in ipconfigUSE_DNS is set to 0, or\r
-ipconfigUSE_DNS is set to 1 but a DNS server cannot be contacted. */\r
-#define configNET_MASK0 255\r
-#define configNET_MASK1 0\r
-#define configNET_MASK2 0\r
-#define configNET_MASK3 0\r
-\r
-/* The UDP port to which print messages are sent. */\r
-#define configPRINT_PORT ( 15000 )\r
-\r
-#if( defined( _MSC_VER ) && ( _MSC_VER <= 1600 ) && !defined( snprintf ) )\r
- /* Map to Windows names. */\r
- #define snprintf _snprintf\r
- #define vsnprintf _vsnprintf\r
-#endif\r
-\r
-/* Visual studio does not have an implementation of strcasecmp(). */\r
-#define strcasecmp _stricmp\r
-#define strncasecmp _strnicmp\r
-#define strcmpi _strcmpi\r
-\r
-#define configPRINTF( X ) printf X\r
-\r
-#endif /* FREERTOS_CONFIG_H */\r
-\r