-/***********************************************************************************************************************\r
-* DISCLAIMER\r
-* This software is supplied by Renesas Electronics Corporation and is only intended for use with Renesas products. No\r
-* other uses are authorized. This software is owned by Renesas Electronics Corporation and is protected under all\r
-* applicable laws, including copyright laws.\r
-* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING\r
-* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY,\r
-* FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED. TO THE MAXIMUM\r
-* EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES\r
-* SHALL BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR ANY REASON RELATED TO THIS\r
-* SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.\r
-* Renesas reserves the right, without notice, to make changes to this software and to discontinue the availability of\r
-* this software. By using this software, you agree to the additional terms and conditions found by accessing the\r
-* following link:\r
-* http://www.renesas.com/disclaimer\r
-*\r
-* Copyright (C) 2015 Renesas Electronics Corporation. All rights reserved.\r
-***********************************************************************************************************************/\r
-/***********************************************************************************************************************\r
-* File Name : ether_callback.c\r
-* Version : ----\r
-* Description : This module solves all the world's problems\r
-***********************************************************************************************************************/\r
-/**********************************************************************************************************************\r
-* History : DD.MM.YYYY Version Description\r
-* : 05.01.2015 ---- Clean up source code.\r
-***********************************************************************************************************************/\r
-\r
-/***********************************************************************************************************************\r
-Includes <System Includes> , "Project Includes"\r
-***********************************************************************************************************************/\r
-#include "r_ether_rx_if.h"\r
-\r
-/***********************************************************************************************************************\r
-Private global variables and functions\r
-***********************************************************************************************************************/\r
-int32_t callback_ether_regist(void);\r
-void callback_ether(void * pparam);\r
-static void callback_wakeon_lan(uint32_t channel);\r
-static void callback_link_on(uint32_t channel);\r
-static void callback_link_off(uint32_t channel);\r
-\r
-volatile uint8_t pause_enable = ETHER_FLAG_OFF;\r
-volatile uint8_t magic_packet_detect[ETHER_CHANNEL_MAX];\r
-volatile uint8_t link_detect[ETHER_CHANNEL_MAX];\r
-\r
-void EINT_Trig_isr(void *);\r
-\r
-/*\r
- * When that Link Status changes, the following function will be called:\r
- */\r
-void prvLinkStatusChange( BaseType_t xStatus );\r
-\r
-/***********************************************************************************************************************\r
-* Function Name: callback_ether\r
-* Description : Regist of callback function\r
-* Arguments : -\r
-* Return Value : 0: success, -1:failed\r
-***********************************************************************************************************************/\r
-int32_t callback_ether_regist(void)\r
-{\r
- ether_param_t param;\r
- ether_cb_t cb_func;\r
-\r
- int32_t ret;\r
-\r
- /* Set the callback function (LAN cable connect/disconnect event) */\r
- cb_func.pcb_func = &callback_ether;\r
- param.ether_callback = cb_func;\r
- ret = R_ETHER_Control(CONTROL_SET_CALLBACK, param);\r
- if (ETHER_SUCCESS != ret)\r
- {\r
- return -1;\r
- }\r
-\r
- /* Set the callback function (Ether interrupt event) */\r
- cb_func.pcb_int_hnd = &EINT_Trig_isr;\r
- param.ether_callback = cb_func;\r
- ret = R_ETHER_Control(CONTROL_SET_INT_HANDLER, param);\r
- if (ETHER_SUCCESS != ret)\r
- {\r
- return -1;\r
- }\r
- return 0;\r
-} /* End of function callback_ether_regist() */\r
-\r
-/***********************************************************************************************************************\r
-* Function Name: callback_ether\r
-* Description : Sample of the callback function\r
-* Arguments : pparam -\r
-*\r
-* Return Value : none\r
-***********************************************************************************************************************/\r
-void callback_ether(void * pparam)\r
-{\r
- ether_cb_arg_t * pdecode;\r
- uint32_t channel;\r
-\r
- pdecode = (ether_cb_arg_t *)pparam;\r
- channel = pdecode->channel; /* Get Ethernet channel number */\r
-\r
- switch (pdecode->event_id)\r
- {\r
- /* Callback function that notifies user to have detected magic packet. */\r
- case ETHER_CB_EVENT_ID_WAKEON_LAN:\r
- callback_wakeon_lan(channel);\r
- break;\r
-\r
- /* Callback function that notifies user to have become Link up. */\r
- case ETHER_CB_EVENT_ID_LINK_ON:\r
- callback_link_on(channel);\r
- break;\r
-\r
- /* Callback function that notifies user to have become Link down. */\r
- case ETHER_CB_EVENT_ID_LINK_OFF:\r
- callback_link_off(channel);\r
- break;\r
-\r
- default:\r
- break;\r
- }\r
-} /* End of function callback_ether() */\r
-\r
-/***********************************************************************************************************************\r
-* Function Name: callback_wakeon_lan\r
-* Description :\r
-* Arguments : channel -\r
-* Ethernet channel number\r
-* Return Value : none\r
-***********************************************************************************************************************/\r
-static void callback_wakeon_lan(uint32_t channel)\r
-{\r
- if (ETHER_CHANNEL_MAX > channel)\r
- {\r
- magic_packet_detect[channel] = 1;\r
-\r
- /* Please add necessary processing when magic packet is detected. */\r
- }\r
-} /* End of function callback_wakeon_lan() */\r
-\r
-/***********************************************************************************************************************\r
-* Function Name: callback_link_on\r
-* Description :\r
-* Arguments : channel -\r
-* Ethernet channel number\r
-* Return Value : none\r
-***********************************************************************************************************************/\r
-static void callback_link_on(uint32_t channel)\r
-{\r
- if (ETHER_CHANNEL_MAX > channel)\r
- {\r
- link_detect[channel] = ETHER_FLAG_ON_LINK_ON;\r
-\r
- /* Please add necessary processing when becoming Link up. */\r
- prvLinkStatusChange( 1 );\r
- }\r
-} /* End of function callback_link_on() */\r
-\r
-/***********************************************************************************************************************\r
-* Function Name: callback_link_off\r
-* Description :\r
-* Arguments : channel -\r
-* Ethernet channel number\r
-* Return Value : none\r
-***********************************************************************************************************************/\r
-static void callback_link_off(uint32_t channel)\r
-{\r
- if (ETHER_CHANNEL_MAX > channel)\r
- {\r
- link_detect[channel] = ETHER_FLAG_ON_LINK_OFF;\r
-\r
- /* Please add necessary processing when becoming Link down. */\r
- prvLinkStatusChange( 0 );\r
- }\r
-} /* End of function ether_cb_link_off() */\r
-\r
-/* End of File */\r
+/***********************************************************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only intended for use with Renesas products. No
+* other uses are authorized. This software is owned by Renesas Electronics Corporation and is protected under all
+* applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED. TO THE MAXIMUM
+* EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES
+* SHALL BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR ANY REASON RELATED TO THIS
+* SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software and to discontinue the availability of
+* this software. By using this software, you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+*
+* Copyright (C) 2015 Renesas Electronics Corporation. All rights reserved.
+***********************************************************************************************************************/
+/***********************************************************************************************************************
+* File Name : ether_callback.c
+* Version : ----
+* Description : This module solves all the world's problems
+***********************************************************************************************************************/
+/**********************************************************************************************************************
+* History : DD.MM.YYYY Version Description
+* : 05.01.2015 ---- Clean up source code.
+***********************************************************************************************************************/
+
+/***********************************************************************************************************************
+Includes <System Includes> , "Project Includes"
+***********************************************************************************************************************/
+#include "r_ether_rx_if.h"
+
+/***********************************************************************************************************************
+Private global variables and functions
+***********************************************************************************************************************/
+int32_t callback_ether_regist(void);
+void callback_ether(void * pparam);
+static void callback_wakeon_lan(uint32_t channel);
+static void callback_link_on(uint32_t channel);
+static void callback_link_off(uint32_t channel);
+
+volatile uint8_t pause_enable = ETHER_FLAG_OFF;
+volatile uint8_t magic_packet_detect[ETHER_CHANNEL_MAX];
+volatile uint8_t link_detect[ETHER_CHANNEL_MAX];
+
+void EINT_Trig_isr(void *);
+
+/*
+ * When that Link Status changes, the following function will be called:
+ */
+void prvLinkStatusChange( BaseType_t xStatus );
+
+/***********************************************************************************************************************
+* Function Name: callback_ether
+* Description : Regist of callback function
+* Arguments : -
+* Return Value : 0: success, -1:failed
+***********************************************************************************************************************/
+int32_t callback_ether_regist(void)
+{
+ ether_param_t param;
+ ether_cb_t cb_func;
+
+ int32_t ret;
+
+ /* Set the callback function (LAN cable connect/disconnect event) */
+ cb_func.pcb_func = &callback_ether;
+ param.ether_callback = cb_func;
+ ret = R_ETHER_Control(CONTROL_SET_CALLBACK, param);
+ if (ETHER_SUCCESS != ret)
+ {
+ return -1;
+ }
+
+ /* Set the callback function (Ether interrupt event) */
+ cb_func.pcb_int_hnd = &EINT_Trig_isr;
+ param.ether_callback = cb_func;
+ ret = R_ETHER_Control(CONTROL_SET_INT_HANDLER, param);
+ if (ETHER_SUCCESS != ret)
+ {
+ return -1;
+ }
+ return 0;
+} /* End of function callback_ether_regist() */
+
+/***********************************************************************************************************************
+* Function Name: callback_ether
+* Description : Sample of the callback function
+* Arguments : pparam -
+*
+* Return Value : none
+***********************************************************************************************************************/
+void callback_ether(void * pparam)
+{
+ ether_cb_arg_t * pdecode;
+ uint32_t channel;
+
+ pdecode = (ether_cb_arg_t *)pparam;
+ channel = pdecode->channel; /* Get Ethernet channel number */
+
+ switch (pdecode->event_id)
+ {
+ /* Callback function that notifies user to have detected magic packet. */
+ case ETHER_CB_EVENT_ID_WAKEON_LAN:
+ callback_wakeon_lan(channel);
+ break;
+
+ /* Callback function that notifies user to have become Link up. */
+ case ETHER_CB_EVENT_ID_LINK_ON:
+ callback_link_on(channel);
+ break;
+
+ /* Callback function that notifies user to have become Link down. */
+ case ETHER_CB_EVENT_ID_LINK_OFF:
+ callback_link_off(channel);
+ break;
+
+ default:
+ break;
+ }
+} /* End of function callback_ether() */
+
+/***********************************************************************************************************************
+* Function Name: callback_wakeon_lan
+* Description :
+* Arguments : channel -
+* Ethernet channel number
+* Return Value : none
+***********************************************************************************************************************/
+static void callback_wakeon_lan(uint32_t channel)
+{
+ if (ETHER_CHANNEL_MAX > channel)
+ {
+ magic_packet_detect[channel] = 1;
+
+ /* Please add necessary processing when magic packet is detected. */
+ }
+} /* End of function callback_wakeon_lan() */
+
+/***********************************************************************************************************************
+* Function Name: callback_link_on
+* Description :
+* Arguments : channel -
+* Ethernet channel number
+* Return Value : none
+***********************************************************************************************************************/
+static void callback_link_on(uint32_t channel)
+{
+ if (ETHER_CHANNEL_MAX > channel)
+ {
+ link_detect[channel] = ETHER_FLAG_ON_LINK_ON;
+
+ /* Please add necessary processing when becoming Link up. */
+ prvLinkStatusChange( 1 );
+ }
+} /* End of function callback_link_on() */
+
+/***********************************************************************************************************************
+* Function Name: callback_link_off
+* Description :
+* Arguments : channel -
+* Ethernet channel number
+* Return Value : none
+***********************************************************************************************************************/
+static void callback_link_off(uint32_t channel)
+{
+ if (ETHER_CHANNEL_MAX > channel)
+ {
+ link_detect[channel] = ETHER_FLAG_ON_LINK_OFF;
+
+ /* Please add necessary processing when becoming Link down. */
+ prvLinkStatusChange( 0 );
+ }
+} /* End of function ether_cb_link_off() */
+
+/* End of File */