/*\r
- FreeRTOS V7.5.0 - Copyright (C) 2013 Real Time Engineers Ltd.\r
+ FreeRTOS V7.6.0 - Copyright (C) 2013 Real Time Engineers Ltd.\r
+ All rights reserved\r
\r
VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.\r
\r
* in this file. prvQueueReceiveTask() sits in a loop that causes it to\r
* repeatedly attempt to read data from the queue that was created within\r
* main(). When data is received, the task checks the value of the data, and\r
- * if the value equals the expected 100, toggles the blue LED. The 'block \r
- * time' parameter passed to the queue receive function specifies that the task \r
- * should be held in the Blocked state indefinitely to wait for data to be \r
- * available on the queue. The queue receive task will only leave the Blocked \r
- * state when the queue send task writes to the queue. As the queue send task \r
- * writes to the queue every 200 milliseconds, the queue receive task leaves the \r
- * Blocked state every 200 milliseconds, and therefore toggles the blue LED \r
+ * if the value equals the expected 100, toggles the blue LED. The 'block\r
+ * time' parameter passed to the queue receive function specifies that the task\r
+ * should be held in the Blocked state indefinitely to wait for data to be\r
+ * available on the queue. The queue receive task will only leave the Blocked\r
+ * state when the queue send task writes to the queue. As the queue send task\r
+ * writes to the queue every 200 milliseconds, the queue receive task leaves the\r
+ * Blocked state every 200 milliseconds, and therefore toggles the blue LED\r
* every 200 milliseconds.\r
*\r
* The LED Software Timer and the Button Interrupt:\r
* The user button SW2 is configured to generate an interrupt each time it is\r
- * pressed. The interrupt service routine switches the green LED on, and \r
- * resets the LED software timer. The LED timer has a 5000 millisecond (5 \r
- * second) period, and uses a callback function that is defined to just turn the \r
- * LED off again. Therefore, pressing the user button will turn the LED on, and \r
- * the LED will remain on until a full five seconds pass without the button \r
+ * pressed. The interrupt service routine switches the green LED on, and\r
+ * resets the LED software timer. The LED timer has a 5000 millisecond (5\r
+ * second) period, and uses a callback function that is defined to just turn the\r
+ * LED off again. Therefore, pressing the user button will turn the LED on, and\r
+ * the LED will remain on until a full five seconds pass without the button\r
* being pressed.\r
*/\r
\r
{\r
/* Start the two tasks as described in the comments at the top of this\r
file. */\r
- xTaskCreate( prvQueueReceiveTask, ( signed char * ) "Rx", configMINIMAL_STACK_SIZE, NULL, mainQUEUE_RECEIVE_TASK_PRIORITY, NULL );\r
- xTaskCreate( prvQueueSendTask, ( signed char * ) "TX", configMINIMAL_STACK_SIZE, NULL, mainQUEUE_SEND_TASK_PRIORITY, NULL );\r
+ xTaskCreate( prvQueueReceiveTask, "Rx", configMINIMAL_STACK_SIZE, NULL, mainQUEUE_RECEIVE_TASK_PRIORITY, NULL );\r
+ xTaskCreate( prvQueueSendTask, "TX", configMINIMAL_STACK_SIZE, NULL, mainQUEUE_SEND_TASK_PRIORITY, NULL );\r
\r
/* Create the software timer that is responsible for turning off the LED\r
if the button is not pushed within 5000ms, as described at the top of\r
this file. */\r
- xButtonLEDTimer = xTimerCreate( ( const signed char * ) "ButtonLEDTimer", /* A text name, purely to help debugging. */\r
- mainBUTTON_LED_TIMER_PERIOD_MS, /* The timer period, in this case 5000ms (5s). */\r
- pdFALSE, /* This is a one shot timer, so xAutoReload is set to pdFALSE. */\r
- ( void * ) 0, /* The ID is not used, so can be set to anything. */\r
- prvButtonLEDTimerCallback /* The callback function that switches the LED off. */\r
+ xButtonLEDTimer = xTimerCreate( "ButtonLEDTimer", /* A text name, purely to help debugging. */\r
+ mainBUTTON_LED_TIMER_PERIOD_MS, /* The timer period, in this case 5000ms (5s). */\r
+ pdFALSE, /* This is a one shot timer, so xAutoReload is set to pdFALSE. */\r
+ ( void * ) 0, /* The ID is not used, so can be set to anything. */\r
+ prvButtonLEDTimerCallback /* The callback function that switches the LED off. */\r
);\r
\r
/* Start the tasks and timer running. */\r
/* Enable the interrupt on SW1. */\r
PORTE_PCR26 = PORT_PCR_MUX( 1 ) | PORT_PCR_IRQC( 0xA ) | PORT_PCR_PE_MASK | PORT_PCR_PS_MASK;\r
enable_irq( mainGPIO_E_VECTOR );\r
- \r
+\r
/* The interrupt calls an interrupt safe API function - so its priority must\r
be equal to or lower than configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY. */\r
set_irq_priority( mainGPIO_E_VECTOR, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );\r
- \r
+\r
/* Set PTA10, PTA11, PTA28, and PTA29 (connected to LED's) for GPIO\r
functionality. */\r
PORTA_PCR10 = ( 0 | PORT_PCR_MUX( 1 ) );\r
PORTA_PCR11 = ( 0 | PORT_PCR_MUX( 1 ) );\r
PORTA_PCR28 = ( 0 | PORT_PCR_MUX( 1 ) );\r
PORTA_PCR29 = ( 0 | PORT_PCR_MUX( 1 ) );\r
- \r
+\r
/* Change PTA10, PTA29 to outputs. */\r
- GPIOA_PDDR=GPIO_PDDR_PDD( mainTASK_CONTROLLED_LED | mainTIMER_CONTROLLED_LED ); \r
+ GPIOA_PDDR=GPIO_PDDR_PDD( mainTASK_CONTROLLED_LED | mainTIMER_CONTROLLED_LED );\r
\r
/* Start with LEDs off. */\r
GPIOA_PTOR = ~0U;\r
}\r
/*-----------------------------------------------------------*/\r
\r
-void vApplicationStackOverflowHook( xTaskHandle pxTask, signed char *pcTaskName )\r
+void vApplicationStackOverflowHook( xTaskHandle pxTask, char *pcTaskName )\r
{\r
( void ) pcTaskName;\r
( void ) pxTask;\r
void vMainConfigureTimerForRunTimeStats( void ) {}\r
unsigned long ulMainGetRunTimeCounterValue( void ) { return 0UL; }\r
\r
-/* A tick hook is used by the "Full" build configuration. The Full and blinky \r
-build configurations share a FreeRTOSConfig.h header file, so this simple build \r
-configuration also has to define a tick hook - even though it does not actually \r
+/* A tick hook is used by the "Full" build configuration. The Full and blinky\r
+build configurations share a FreeRTOSConfig.h header file, so this simple build\r
+configuration also has to define a tick hook - even though it does not actually\r
use it for anything. */\r
void vApplicationTickHook( void ) {}\r
\r