--- /dev/null
+/**\r
+ ******************************************************************************\r
+ * @file stm32l4xx_hal_conf.h\r
+ * @brief HAL configuration file. \r
+ ******************************************************************************\r
+ * @attention\r
+ *\r
+ * <h2><center>© COPYRIGHT(c) 2019 STMicroelectronics</center></h2>\r
+ *\r
+ * Redistribution and use in source and binary forms, with or without modification,\r
+ * are permitted provided that the following conditions are met:\r
+ * 1. Redistributions of source code must retain the above copyright notice,\r
+ * this list of conditions and the following disclaimer.\r
+ * 2. Redistributions in binary form must reproduce the above copyright notice,\r
+ * this list of conditions and the following disclaimer in the documentation\r
+ * and/or other materials provided with the distribution.\r
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors\r
+ * may be used to endorse or promote products derived from this software\r
+ * without specific prior written permission.\r
+ *\r
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"\r
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE\r
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE\r
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE\r
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL\r
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR\r
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER\r
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,\r
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE\r
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.\r
+ *\r
+ ******************************************************************************\r
+ */ \r
+\r
+/* Define to prevent recursive inclusion -------------------------------------*/\r
+#ifndef __STM32L4xx_HAL_CONF_H\r
+#define __STM32L4xx_HAL_CONF_H\r
+\r
+#ifdef __cplusplus\r
+ extern "C" {\r
+#endif\r
+\r
+/* Exported types ------------------------------------------------------------*/\r
+/* Exported constants --------------------------------------------------------*/\r
+\r
+/* ########################## Module Selection ############################## */\r
+/**\r
+ * @brief This is the list of modules to be used in the HAL driver \r
+ */\r
+\r
+#define HAL_MODULE_ENABLED \r
+/*#define HAL_ADC_MODULE_ENABLED */\r
+/*#define HAL_CRYP_MODULE_ENABLED */\r
+/*#define HAL_CAN_MODULE_ENABLED */\r
+/*#define HAL_COMP_MODULE_ENABLED */\r
+/*#define HAL_CRC_MODULE_ENABLED */\r
+/*#define HAL_CRYP_MODULE_ENABLED */\r
+/*#define HAL_DAC_MODULE_ENABLED */\r
+/*#define HAL_DCMI_MODULE_ENABLED */\r
+/*#define HAL_DMA2D_MODULE_ENABLED */\r
+#define HAL_DFSDM_MODULE_ENABLED\r
+/*#define HAL_DSI_MODULE_ENABLED */\r
+/*#define HAL_FIREWALL_MODULE_ENABLED */\r
+/*#define HAL_GFXMMU_MODULE_ENABLED */\r
+/*#define HAL_HCD_MODULE_ENABLED */\r
+/*#define HAL_HASH_MODULE_ENABLED */\r
+/*#define HAL_I2S_MODULE_ENABLED */\r
+/*#define HAL_IRDA_MODULE_ENABLED */\r
+/*#define HAL_IWDG_MODULE_ENABLED */\r
+/*#define HAL_LTDC_MODULE_ENABLED */\r
+/*#define HAL_LCD_MODULE_ENABLED */\r
+/*#define HAL_LPTIM_MODULE_ENABLED */\r
+/*#define HAL_MMC_MODULE_ENABLED */\r
+/*#define HAL_NAND_MODULE_ENABLED */\r
+/*#define HAL_NOR_MODULE_ENABLED */\r
+/*#define HAL_OPAMP_MODULE_ENABLED */\r
+/*#define HAL_OSPI_MODULE_ENABLED */\r
+/*#define HAL_OSPI_MODULE_ENABLED */\r
+#define HAL_PCD_MODULE_ENABLED\r
+/*#define HAL_QSPI_MODULE_ENABLED */\r
+#define HAL_QSPI_MODULE_ENABLED\r
+/*#define HAL_RNG_MODULE_ENABLED */\r
+/*#define HAL_RTC_MODULE_ENABLED */\r
+/*#define HAL_SAI_MODULE_ENABLED */\r
+/*#define HAL_SD_MODULE_ENABLED */\r
+/*#define HAL_SMBUS_MODULE_ENABLED */\r
+/*#define HAL_SMARTCARD_MODULE_ENABLED */\r
+#define HAL_SPI_MODULE_ENABLED\r
+/*#define HAL_SRAM_MODULE_ENABLED */\r
+/*#define HAL_SWPMI_MODULE_ENABLED */\r
+#define HAL_TIM_MODULE_ENABLED\r
+/*#define HAL_TSC_MODULE_ENABLED */\r
+#define HAL_UART_MODULE_ENABLED\r
+/*#define HAL_USART_MODULE_ENABLED */\r
+/*#define HAL_WWDG_MODULE_ENABLED */\r
+/*#define HAL_EXTI_MODULE_ENABLED */\r
+#define HAL_GPIO_MODULE_ENABLED\r
+#define HAL_EXTI_MODULE_ENABLED \r
+#define HAL_I2C_MODULE_ENABLED\r
+#define HAL_DMA_MODULE_ENABLED\r
+#define HAL_RCC_MODULE_ENABLED\r
+#define HAL_FLASH_MODULE_ENABLED\r
+#define HAL_PWR_MODULE_ENABLED\r
+#define HAL_CORTEX_MODULE_ENABLED\r
+\r
+/* ########################## Oscillator Values adaptation ####################*/\r
+/**\r
+ * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.\r
+ * This value is used by the RCC HAL module to compute the system frequency\r
+ * (when HSE is used as system clock source, directly or through the PLL). \r
+ */\r
+#if !defined (HSE_VALUE) \r
+ #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */\r
+#endif /* HSE_VALUE */\r
+\r
+#if !defined (HSE_STARTUP_TIMEOUT)\r
+ #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */\r
+#endif /* HSE_STARTUP_TIMEOUT */\r
+\r
+/**\r
+ * @brief Internal Multiple Speed oscillator (MSI) default value.\r
+ * This value is the default MSI range value after Reset.\r
+ */\r
+#if !defined (MSI_VALUE)\r
+ #define MSI_VALUE ((uint32_t)4000000U) /*!< Value of the Internal oscillator in Hz*/\r
+#endif /* MSI_VALUE */\r
+/**\r
+ * @brief Internal High Speed oscillator (HSI) value.\r
+ * This value is used by the RCC HAL module to compute the system frequency\r
+ * (when HSI is used as system clock source, directly or through the PLL). \r
+ */\r
+#if !defined (HSI_VALUE)\r
+ #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/\r
+#endif /* HSI_VALUE */\r
+\r
+/**\r
+ * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG.\r
+ * This internal oscillator is mainly dedicated to provide a high precision clock to\r
+ * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry.\r
+ * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency\r
+ * which is subject to manufacturing process variations.\r
+ */\r
+#if !defined (HSI48_VALUE) \r
+ #define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz.\r
+ The real value my vary depending on manufacturing process variations.*/\r
+#endif /* HSI48_VALUE */\r
+\r
+/**\r
+ * @brief Internal Low Speed oscillator (LSI) value.\r
+ */\r
+#if !defined (LSI_VALUE) \r
+ #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/\r
+#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz\r
+ The real value may vary depending on the variations\r
+ in voltage and temperature.*/\r
+\r
+/**\r
+ * @brief External Low Speed oscillator (LSE) value.\r
+ * This value is used by the UART, RTC HAL module to compute the system frequency\r
+ */\r
+#if !defined (LSE_VALUE)\r
+ #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/\r
+#endif /* LSE_VALUE */\r
+\r
+#if !defined (LSE_STARTUP_TIMEOUT)\r
+ #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */\r
+#endif /* HSE_STARTUP_TIMEOUT */\r
+\r
+/**\r
+ * @brief External clock source for SAI1 peripheral\r
+ * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source \r
+ * frequency.\r
+ */\r
+#if !defined (EXTERNAL_SAI1_CLOCK_VALUE)\r
+ #define EXTERNAL_SAI1_CLOCK_VALUE ((uint32_t)2097000U) /*!< Value of the SAI1 External clock source in Hz*/\r
+#endif /* EXTERNAL_SAI1_CLOCK_VALUE */\r
+\r
+/**\r
+ * @brief External clock source for SAI2 peripheral\r
+ * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source \r
+ * frequency.\r
+ */\r
+#if !defined (EXTERNAL_SAI2_CLOCK_VALUE)\r
+ #define EXTERNAL_SAI2_CLOCK_VALUE ((uint32_t)2097000U) /*!< Value of the SAI2 External clock source in Hz*/\r
+#endif /* EXTERNAL_SAI2_CLOCK_VALUE */\r
+\r
+/* Tip: To avoid modifying this file each time you need to use different HSE,\r
+ === you can define the HSE value in your toolchain compiler preprocessor. */\r
+\r
+/* ########################### System Configuration ######################### */\r
+/**\r
+ * @brief This is the HAL system configuration section\r
+ */ \r
+ \r
+#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ \r
+#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ \r
+#define USE_RTOS 0U \r
+#define PREFETCH_ENABLE 0U\r
+#define INSTRUCTION_CACHE_ENABLE 1U\r
+#define DATA_CACHE_ENABLE 1U\r
+\r
+/* ########################## Assert Selection ############################## */\r
+/**\r
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the \r
+ * HAL drivers code\r
+ */\r
+/* #define USE_FULL_ASSERT 1U */\r
+\r
+/* ################## SPI peripheral configuration ########################## */\r
+\r
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver\r
+ * Activated: CRC code is present inside driver\r
+ * Deactivated: CRC code cleaned from driver\r
+ */\r
+\r
+#define USE_SPI_CRC 0U\r
+\r
+/* Includes ------------------------------------------------------------------*/\r
+/**\r
+ * @brief Include module's header file\r
+ */\r
+\r
+#ifdef HAL_RCC_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_rcc.h"\r
+ #include "stm32l4xx_hal_rcc_ex.h"\r
+#endif /* HAL_RCC_MODULE_ENABLED */\r
+\r
+#ifdef HAL_EXTI_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_exti.h"\r
+#endif /* HAL_EXTI_MODULE_ENABLED */\r
+\r
+#ifdef HAL_GPIO_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_gpio.h"\r
+#endif /* HAL_GPIO_MODULE_ENABLED */\r
+\r
+#ifdef HAL_DMA_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_dma.h"\r
+ #include "stm32l4xx_hal_dma_ex.h"\r
+#endif /* HAL_DMA_MODULE_ENABLED */\r
+\r
+#ifdef HAL_DFSDM_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_dfsdm.h"\r
+#endif /* HAL_DFSDM_MODULE_ENABLED */\r
+\r
+#ifdef HAL_CORTEX_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_cortex.h"\r
+#endif /* HAL_CORTEX_MODULE_ENABLED */\r
+\r
+#ifdef HAL_ADC_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_adc.h"\r
+#endif /* HAL_ADC_MODULE_ENABLED */\r
+\r
+#ifdef HAL_CAN_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_can.h"\r
+#endif /* HAL_CAN_MODULE_ENABLED */\r
+\r
+#ifdef HAL_COMP_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_comp.h"\r
+#endif /* HAL_COMP_MODULE_ENABLED */\r
+\r
+#ifdef HAL_CRC_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_crc.h"\r
+#endif /* HAL_CRC_MODULE_ENABLED */\r
+\r
+#ifdef HAL_CRYP_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_cryp.h"\r
+#endif /* HAL_CRYP_MODULE_ENABLED */\r
+\r
+#ifdef HAL_DAC_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_dac.h"\r
+#endif /* HAL_DAC_MODULE_ENABLED */\r
+\r
+#ifdef HAL_DCMI_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_dcmi.h"\r
+#endif /* HAL_DCMI_MODULE_ENABLED */\r
+\r
+#ifdef HAL_DMA2D_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_dma2d.h"\r
+#endif /* HAL_DMA2D_MODULE_ENABLED */\r
+\r
+#ifdef HAL_DSI_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_dsi.h"\r
+#endif /* HAL_DSI_MODULE_ENABLED */\r
+\r
+#ifdef HAL_FIREWALL_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_firewall.h"\r
+#endif /* HAL_FIREWALL_MODULE_ENABLED */\r
+\r
+#ifdef HAL_FLASH_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_flash.h"\r
+#endif /* HAL_FLASH_MODULE_ENABLED */\r
+\r
+#ifdef HAL_HASH_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_hash.h"\r
+#endif /* HAL_HASH_MODULE_ENABLED */\r
+\r
+#ifdef HAL_SRAM_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_sram.h"\r
+#endif /* HAL_SRAM_MODULE_ENABLED */\r
+\r
+#ifdef HAL_MMC_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_mmc.h"\r
+#endif /* HAL_MMC_MODULE_ENABLED */\r
+\r
+#ifdef HAL_NOR_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_nor.h"\r
+#endif /* HAL_NOR_MODULE_ENABLED */\r
+\r
+#ifdef HAL_NAND_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_nand.h"\r
+#endif /* HAL_NAND_MODULE_ENABLED */\r
+\r
+#ifdef HAL_I2C_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_i2c.h"\r
+#endif /* HAL_I2C_MODULE_ENABLED */\r
+\r
+#ifdef HAL_IWDG_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_iwdg.h"\r
+#endif /* HAL_IWDG_MODULE_ENABLED */\r
+\r
+#ifdef HAL_LCD_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_lcd.h"\r
+#endif /* HAL_LCD_MODULE_ENABLED */\r
+\r
+#ifdef HAL_LPTIM_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_lptim.h"\r
+#endif /* HAL_LPTIM_MODULE_ENABLED */\r
+\r
+#ifdef HAL_LTDC_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_ltdc.h"\r
+#endif /* HAL_LTDC_MODULE_ENABLED */\r
+\r
+#ifdef HAL_OPAMP_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_opamp.h"\r
+#endif /* HAL_OPAMP_MODULE_ENABLED */\r
+\r
+#ifdef HAL_OSPI_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_ospi.h"\r
+#endif /* HAL_OSPI_MODULE_ENABLED */\r
+\r
+#ifdef HAL_PWR_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_pwr.h"\r
+#endif /* HAL_PWR_MODULE_ENABLED */\r
+\r
+#ifdef HAL_QSPI_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_qspi.h"\r
+#endif /* HAL_QSPI_MODULE_ENABLED */\r
+\r
+#ifdef HAL_RNG_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_rng.h"\r
+#endif /* HAL_RNG_MODULE_ENABLED */\r
+\r
+#ifdef HAL_RTC_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_rtc.h"\r
+#endif /* HAL_RTC_MODULE_ENABLED */\r
+\r
+#ifdef HAL_SAI_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_sai.h"\r
+#endif /* HAL_SAI_MODULE_ENABLED */\r
+\r
+#ifdef HAL_SD_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_sd.h"\r
+#endif /* HAL_SD_MODULE_ENABLED */\r
+\r
+#ifdef HAL_SMBUS_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_smbus.h"\r
+#endif /* HAL_SMBUS_MODULE_ENABLED */\r
+\r
+#ifdef HAL_SPI_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_spi.h"\r
+#endif /* HAL_SPI_MODULE_ENABLED */\r
+\r
+#ifdef HAL_SWPMI_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_swpmi.h"\r
+#endif /* HAL_SWPMI_MODULE_ENABLED */\r
+\r
+#ifdef HAL_TIM_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_tim.h"\r
+#endif /* HAL_TIM_MODULE_ENABLED */\r
+\r
+#ifdef HAL_TSC_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_tsc.h"\r
+#endif /* HAL_TSC_MODULE_ENABLED */\r
+\r
+#ifdef HAL_UART_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_uart.h"\r
+#endif /* HAL_UART_MODULE_ENABLED */\r
+\r
+#ifdef HAL_USART_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_usart.h"\r
+#endif /* HAL_USART_MODULE_ENABLED */\r
+\r
+#ifdef HAL_IRDA_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_irda.h"\r
+#endif /* HAL_IRDA_MODULE_ENABLED */\r
+\r
+#ifdef HAL_SMARTCARD_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_smartcard.h"\r
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */\r
+\r
+#ifdef HAL_WWDG_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_wwdg.h"\r
+#endif /* HAL_WWDG_MODULE_ENABLED */\r
+\r
+#ifdef HAL_PCD_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_pcd.h"\r
+#endif /* HAL_PCD_MODULE_ENABLED */\r
+\r
+#ifdef HAL_HCD_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_hcd.h"\r
+#endif /* HAL_HCD_MODULE_ENABLED */\r
+\r
+#ifdef HAL_GFXMMU_MODULE_ENABLED\r
+ #include "stm32l4xx_hal_gfxmmu.h"\r
+#endif /* HAL_GFXMMU_MODULE_ENABLED */\r
+\r
+/* Exported macro ------------------------------------------------------------*/\r
+#ifdef USE_FULL_ASSERT\r
+/**\r
+ * @brief The assert_param macro is used for function's parameters check.\r
+ * @param expr: If expr is false, it calls assert_failed function\r
+ * which reports the name of the source file and the source\r
+ * line number of the call that failed.\r
+ * If expr is true, it returns no value.\r
+ * @retval None\r
+ */\r
+ #define assert_param(expr) ((expr) ? (void)0U : assert_failed((char *)__FILE__, __LINE__))\r
+/* Exported functions ------------------------------------------------------- */\r
+ void assert_failed(char *file, uint32_t line);\r
+#else\r
+ #define assert_param(expr) ((void)0U)\r
+#endif /* USE_FULL_ASSERT */\r
+\r
+#ifdef __cplusplus\r
+}\r
+#endif\r
+\r
+#endif /* __STM32L4xx_HAL_CONF_H */\r
+\r
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/\r
projects / freertos / blobdiff