+++ /dev/null
-/** ###################################################################\r
-** THIS BEAN MODULE IS GENERATED BY THE TOOL. DO NOT MODIFY IT.\r
-** Filename : COM0.H\r
-** Project : RTOSDemo\r
-** Processor : MC9S12DP256BCPV\r
-** Beantype : AsynchroSerial\r
-** Version : Bean 02.231, Driver 01.08, CPU db: 2.87.283\r
-** Compiler : Metrowerks HC12 C Compiler\r
-** Date/Time : 19/06/2005, 15:07\r
-** Abstract :\r
-** This bean "AsynchroSerial" implements an asynchronous serial\r
-** communication. The bean supports different settings of \r
-** parity, word width, stop-bit and communication speed,\r
-** user can select interrupt or polling handler.\r
-** Communication speed can be changed also in runtime.\r
-** The bean requires one on-chip asynchronous serial channel.\r
-** Settings :\r
-** Serial channel : SCI0\r
-**\r
-** Protocol\r
-** Init baud rate : 38400baud\r
-** Width : 8 bits\r
-** Stop bits : 1\r
-** Parity : none\r
-** Breaks : Disabled\r
-**\r
-** Registers\r
-** Input buffer : SCI0DRL [207]\r
-** Output buffer : SCI0DRL [207]\r
-** Control register : SCI0CR1 [202]\r
-** Mode register : SCI0CR2 [203]\r
-** Baud setting reg. : SCI0BD [200]\r
-** Special register : SCI0SR1 [204]\r
-**\r
-** Input interrupt\r
-** Vector name : INT_SCI0\r
-** Priority : 1\r
-**\r
-** Output interrupt\r
-** Vector name : INT_SCI0\r
-** Priority : 1\r
-**\r
-** Used pins : \r
-** ----------------------------------------------------\r
-** Function | On package | Name\r
-** ----------------------------------------------------\r
-** Input | 89 | PS0_RxD0\r
-** Output | 90 | PS1_TxD0\r
-** ----------------------------------------------------\r
-**\r
-**\r
-** Used baud modes :\r
-** ----------------------------------------------------\r
-** No. | Mode ID | Baud rate\r
-** ----------------------------------------------------\r
-** 0 | Bm_38400baud | 38400baud\r
-** 1 | Bm_19200baud | 19200baud\r
-** 2 | Bm_9600baud | 9600baud\r
-** 3 | Bm_4800baud | 4800baud\r
-** ----------------------------------------------------\r
-** Contents :\r
-** SetBaudRateMode - byte COM0_SetBaudRateMode(byte Mod);\r
-**\r
-** (c) Copyright UNIS, spol. s r.o. 1997-2002\r
-** UNIS, spol. s r.o.\r
-** Jundrovska 33\r
-** 624 00 Brno\r
-** Czech Republic\r
-** http : www.processorexpert.com\r
-** mail : info@processorexpert.com\r
-** ###################################################################*/\r
-\r
-#ifndef __COM0\r
-#define __COM0\r
-\r
-/* MODULE COM0. */\r
-\r
-#include "Cpu.h"\r
-\r
-#define COM0_Bm_38400baud 0 /* Constant for switch to mode 0 */\r
-#define COM0_Bm_19200baud 1 /* Constant for switch to mode 1 */\r
-#define COM0_Bm_9600baud 2 /* Constant for switch to mode 2 */\r
-#define COM0_Bm_4800baud 3 /* Constant for switch to mode 3 */\r
-\r
-\r
-\r
-#ifndef __BWUserType_tItem\r
-#define __BWUserType_tItem\r
- typedef struct { /* Item of the index table for possible baudrates */\r
- word div; /* divisior */\r
- byte val; /* values of the prescalers */\r
- } tItem;\r
-#endif\r
-#ifndef __BWUserType_COM0_TError\r
-#define __BWUserType_COM0_TError\r
-typedef union {\r
- byte err;\r
- struct {\r
- bool OverRun : 1; /* OverRun error flag */\r
- bool Framing : 1; /* Framing error flag */\r
- bool Parity : 1; /* Parity error flag */\r
- bool RxBufOvf : 1; /* Rx buffer full error flag */\r
- bool Noise : 1; /* Noise error */\r
- bool Break : 1; /* Break detect */\r
- bool Idle : 1; /* Idle characted */\r
- }errName;\r
-} COM0_TError;\r
-#endif\r
-#ifndef __BWUserType_TDirection\r
-#define __BWUserType_TDirection\r
- typedef enum { /* */\r
- TXD_INPUT,\r
- TXD_OUTPUT\r
- } TDirection;\r
-#endif\r
-\r
-#ifndef __BWUserType_COM0_TComData\r
-#define __BWUserType_COM0_TComData\r
- typedef byte COM0_TComData ; /* User type for communication. Size of this type depends on the communication data witdh. */\r
-#endif\r
-\r
-#pragma CODE_SEG COM0_CODE /* Code section for this module. */\r
-\r
-byte COM0_SetBaudRateMode(byte Mod);\r
-/*\r
-** ===================================================================\r
-** Method : COM0_SetBaudRateMode (bean AsynchroSerial)\r
-**\r
-** Description :\r
-** This method changes the channel communication speed (baud\r
-** rate). This method can be used only if you specify a list\r
-** of possible period settings at design time (see <Timing\r
-** dialog box> - Runtime setting - from a list of values).\r
-** Each of these settings constitutes a mode and Processor\r
-** Expert^[TM] assigns them a mode identifier. The prescaler\r
-** and compare values corresponding to each mode are\r
-** calculated at design time. You may switch modes at\r
-** runtime by referring only to a mode identifier. No\r
-** run-time calculations are performed, all the calculations\r
-** are performed at design time.\r
-** Parameters :\r
-** NAME - DESCRIPTION\r
-** Mod - Timing mode to set\r
-** Returns :\r
-** --- - Error code, possible codes:\r
-** ERR_OK - OK\r
-** ERR_SPEED - This device does not work in\r
-** the active speed mode\r
-** ===================================================================\r
-*/\r
-\r
-#pragma CODE_SEG __NEAR_SEG NON_BANKED /* Interrupt section for this module. Placement will be in NON_BANKED area. */\r
-__interrupt void COM0_Interrupt(void);\r
-#pragma CODE_SEG COM0_CODE /* Code section for this module. */\r
-/*\r
-** ===================================================================\r
-** Method : COM0_Interrupt (bean AsynchroSerial)\r
-**\r
-** Description :\r
-** This method is internal. It is used by Processor Expert\r
-** only.\r
-** ===================================================================\r
-*/\r
-\r
-\r
-void COM0_Init(void);\r
-/*\r
-** ===================================================================\r
-** Method : COM0_Init (bean AsynchroSerial)\r
-**\r
-** Description :\r
-** This method is internal. It is used by Processor Expert\r
-** only.\r
-** ===================================================================\r
-*/\r
-\r
-\r
-#pragma CODE_SEG DEFAULT /* Change code section to DEFAULT. */\r
-\r
-/* END COM0. */\r
-\r
-/*\r
-** ###################################################################\r
-**\r
-** This file was created by UNIS Processor Expert 03.33 for \r
-** the Motorola HCS12 series of microcontrollers.\r
-**\r
-** ###################################################################\r
-*/\r
-\r
-#endif /* ifndef __COM0 */\r
projects / freertos / blobdiff