/*\r
- FreeRTOS V7.6.0 - Copyright (C) 2013 Real Time Engineers Ltd. \r
+ FreeRTOS V8.1.2 - Copyright (C) 2014 Real Time Engineers Ltd.\r
All rights reserved\r
\r
VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.\r
the terms of the GNU General Public License (version 2) as published by the\r
Free Software Foundation >>!AND MODIFIED BY!<< the FreeRTOS exception.\r
\r
- >>! NOTE: The modification to the GPL is included to allow you to distribute\r
- >>! a combined work that includes FreeRTOS without being obliged to provide\r
- >>! the source code for proprietary components outside of the FreeRTOS\r
- >>! kernel.\r
+ >>! NOTE: The modification to the GPL is included to allow you to !<<\r
+ >>! distribute a combined work that includes FreeRTOS without being !<<\r
+ >>! obliged to provide the source code for proprietary components !<<\r
+ >>! outside of the FreeRTOS kernel. !<<\r
\r
FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY\r
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS\r
*/\r
\r
/*\r
- * Instead of the normal single demo application, the PIC18F demo is split \r
- * into several smaller programs of which this is the seventh. This enables the \r
+ * Instead of the normal single demo application, the PIC18F demo is split\r
+ * into several smaller programs of which this is the seventh. This enables the\r
* demo's to be executed on the RAM limited PIC-devices.\r
*\r
- * The Demo7 project is configured for a PIC18F4620 device. Main.c starts 10 \r
+ * The Demo7 project is configured for a PIC18F4620 device. Main.c starts 10\r
* tasks (including the idle task). See the indicated files in the demo/common\r
* directory for more information.\r
*\r
* demo/common/minimal/death.c: Creates 1 controltask and\r
* creates/deletes 4 suicidaltasks\r
*\r
- * Main.c also creates a check task. This periodically checks that all the \r
- * other tasks are still running and have not experienced any unexpected \r
- * results. If all the other tasks are executing correctly an LED is flashed \r
- * once every mainCHECK_PERIOD milliseconds. If any of the tasks have not \r
- * executed, or report an error, the frequency of the LED flash will increase \r
+ * Main.c also creates a check task. This periodically checks that all the\r
+ * other tasks are still running and have not experienced any unexpected\r
+ * results. If all the other tasks are executing correctly an LED is flashed\r
+ * once every mainCHECK_PERIOD milliseconds. If any of the tasks have not\r
+ * executed, or report an error, the frequency of the LED flash will increase\r
* to mainERROR_FLASH_RATE.\r
*\r
* On entry to main an 'X' is transmitted. Monitoring the serial port using a\r
- * dumb terminal allows for verification that the device is not continuously \r
+ * dumb terminal allows for verification that the device is not continuously\r
* being reset (no more than one 'X' should be transmitted).\r
*\r
- * http://www.FreeRTOS.org contains important information on the use of the \r
+ * http://www.FreeRTOS.org contains important information on the use of the\r
* wizC PIC18F port.\r
*/\r
\r
/* The period between executions of the check task before and after an error\r
has been discovered. If an error has been discovered the check task runs\r
more frequently - increasing the LED flash rate. */\r
-#define mainNO_ERROR_CHECK_PERIOD ( ( portTickType ) 10000 / portTICK_RATE_MS )\r
-#define mainERROR_CHECK_PERIOD ( ( portTickType ) 1000 / portTICK_RATE_MS )\r
+#define mainNO_ERROR_CHECK_PERIOD ( ( TickType_t ) 10000 / portTICK_PERIOD_MS )\r
+#define mainERROR_CHECK_PERIOD ( ( TickType_t ) 1000 / portTICK_PERIOD_MS )\r
#define mainCHECK_TASK_LED ( ( unsigned char ) 3 )\r
\r
/* Priority definitions for some of the tasks. Other tasks just use the idle\r
#define mainLED_FLASH_PRIORITY ( tskIDLE_PRIORITY + ( unsigned char ) 2 )\r
#define mainCREATOR_TASK_PRIORITY ( tskIDLE_PRIORITY + ( unsigned char ) 1 )\r
\r
-/* Constants required for the communications. Only one character is ever \r
+/* Constants required for the communications. Only one character is ever\r
transmitted. */\r
#define mainCOMMS_QUEUE_LENGTH ( ( unsigned char ) 5 )\r
-#define mainNO_BLOCK ( ( portTickType ) 0 )\r
+#define mainNO_BLOCK ( ( TickType_t ) 0 )\r
#define mainBAUD_RATE ( ( unsigned long ) 57600 )\r
\r
/*\r
vStartLEDFlashTasks( mainLED_FLASH_PRIORITY );\r
\r
/* Start the check task defined in this file. */\r
- xTaskCreate( vErrorChecks, ( const char * const ) "Check", portMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );\r
+ xTaskCreate( vErrorChecks, "Check", portMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );\r
\r
/* This task has to be created last as it keeps account of the number of tasks\r
it expects to see running. */\r
\r
static portTASK_FUNCTION( vErrorChecks, pvParameters )\r
{\r
-portTickType xLastCheckTime;\r
-portTickType xDelayTime = mainNO_ERROR_CHECK_PERIOD;\r
+TickType_t xLastCheckTime;\r
+TickType_t xDelayTime = mainNO_ERROR_CHECK_PERIOD;\r
char cErrorOccurred;\r
\r
- /* We need to initialise xLastCheckTime prior to the first call to \r
+ /* We need to initialise xLastCheckTime prior to the first call to\r
vTaskDelayUntil(). */\r
xLastCheckTime = xTaskGetTickCount();\r
- \r
+\r
/* Cycle for ever, delaying then checking all the other tasks are still\r
operating without error. */\r
for( ;; )\r
{\r
/* Wait until it is time to check the other tasks again. */\r
vTaskDelayUntil( &xLastCheckTime, xDelayTime );\r
- \r
+\r
/* Check all the other tasks are running, and running without ever\r
having an error. */\r
cErrorOccurred = prvCheckOtherTasksAreStillRunning();\r