* TRC_RECORDER_MODE_STREAMING\r
******************************************************************************/\r
#define TRC_CFG_RECORDER_MODE TRC_RECORDER_MODE_SNAPSHOT\r
+/******************************************************************************\r
+ * TRC_CFG_FREERTOS_VERSION\r
+ *\r
+ * Specify what version of FreeRTOS that is used (don't change unless using the\r
+ * trace recorder library with an older version of FreeRTOS).\r
+ *\r
+ * TRC_FREERTOS_VERSION_7_3 If using FreeRTOS v7.3.x\r
+ * TRC_FREERTOS_VERSION_7_4 If using FreeRTOS v7.4.x \r
+ * TRC_FREERTOS_VERSION_7_5_OR_7_6 If using FreeRTOS v7.5.0 - v7.6.0\r
+ * TRC_FREERTOS_VERSION_8_X If using FreeRTOS v8.X.X\r
+ * TRC_FREERTOS_VERSION_9_0_0 If using FreeRTOS v9.0.0\r
+ * TRC_FREERTOS_VERSION_9_0_1 If using FreeRTOS v9.0.1\r
+ * TRC_FREERTOS_VERSION_9_0_2 If using FreeRTOS v9.0.2\r
+ * TRC_FREERTOS_VERSION_10_0_0 If using FreeRTOS v10.0.0 or later\r
+ *****************************************************************************/\r
+#define TRC_CFG_FREERTOS_VERSION TRC_FREERTOS_VERSION_10_0_0\r
+\r
+/*******************************************************************************\r
+ * TRC_CFG_SCHEDULING_ONLY\r
+ *\r
+ * Macro which should be defined as an integer value.\r
+ *\r
+ * If this setting is enabled (= 1), only scheduling events are recorded.\r
+ * If disabled (= 0), all events are recorded (unless filtered in other ways).\r
+ *\r
+ * Default value is 0 (= include additional events).\r
+ ******************************************************************************/\r
+#define TRC_CFG_SCHEDULING_ONLY 0\r
+\r
+ /******************************************************************************\r
+ * TRC_CFG_INCLUDE_MEMMANG_EVENTS\r
+ *\r
+ * Macro which should be defined as either zero (0) or one (1).\r
+ *\r
+ * This controls if malloc and free calls should be traced. Set this to zero (0)\r
+ * to exclude malloc/free calls, or one (1) to include such events in the trace.\r
+ *\r
+ * Default value is 1.\r
+ *****************************************************************************/\r
+#define TRC_CFG_INCLUDE_MEMMANG_EVENTS 1\r
+\r
+ /******************************************************************************\r
+ * TRC_CFG_INCLUDE_USER_EVENTS\r
+ *\r
+ * Macro which should be defined as either zero (0) or one (1).\r
+ *\r
+ * If this is zero (0), all code related to User Events is excluded in order \r
+ * to reduce code size. Any attempts of storing User Events are then silently\r
+ * ignored.\r
+ *\r
+ * User Events are application-generated events, like "printf" but for the \r
+ * trace log, generated using vTracePrint and vTracePrintF. \r
+ * The formatting is done on host-side, by Tracealyzer. User Events are \r
+ * therefore much faster than a console printf and can often be used\r
+ * in timing critical code without problems.\r
+ *\r
+ * Note: In streaming mode, User Events are used to provide error messages\r
+ * and warnings from the recorder (in case of incorrect configuration) for\r
+ * display in Tracealyzer. Disabling user events will also disable these\r
+ * warnings. You can however still catch them by calling xTraceGetLastError\r
+ * or by putting breakpoints in prvTraceError and prvTraceWarning.\r
+ *\r
+ * Default value is 1.\r
+ *****************************************************************************/\r
+#define TRC_CFG_INCLUDE_USER_EVENTS 1\r
+\r
+ /*****************************************************************************\r
+ * TRC_CFG_INCLUDE_ISR_TRACING\r
+ *\r
+ * Macro which should be defined as either zero (0) or one (1).\r
+ *\r
+ * If this is zero (0), the code for recording Interrupt Service Routines is\r
+ * excluded, in order to reduce code size.\r
+ *\r
+ * Default value is 1.\r
+ *\r
+ * Note: tracing ISRs requires that you insert calls to vTraceStoreISRBegin\r
+ * and vTraceStoreISREnd in your interrupt handlers.\r
+ *****************************************************************************/\r
+#define TRC_CFG_INCLUDE_ISR_TRACING 1\r
+\r
+ /*****************************************************************************\r
+ * TRC_CFG_INCLUDE_READY_EVENTS\r
+ *\r
+ * Macro which should be defined as either zero (0) or one (1).\r
+ *\r
+ * If one (1), events are recorded when tasks enter scheduling state "ready".\r
+ * This allows Tracealyzer to show the initial pending time before tasks enter\r
+ * the execution state, and present accurate response times.\r
+ * If zero (0), "ready events" are not created, which allows for recording\r
+ * longer traces in the same amount of RAM.\r
+ *\r
+ * Default value is 1.\r
+ *****************************************************************************/\r
+#define TRC_CFG_INCLUDE_READY_EVENTS 1\r
+\r
+ /*****************************************************************************\r
+ * TRC_CFG_INCLUDE_OSTICK_EVENTS\r
+ *\r
+ * Macro which should be defined as either zero (0) or one (1).\r
+ *\r
+ * If this is one (1), events will be generated whenever the OS clock is\r
+ * increased. If zero (0), OS tick events are not generated, which allows for\r
+ * recording longer traces in the same amount of RAM.\r
+ *\r
+ * Default value is 1.\r
+ *****************************************************************************/\r
+#define TRC_CFG_INCLUDE_OSTICK_EVENTS 1\r
+\r
+ /*****************************************************************************\r
+ * TRC_CFG_INCLUDE_EVENT_GROUP_EVENTS\r
+ *\r
+ * Macro which should be defined as either zero (0) or one (1).\r
+ *\r
+ * If this is zero (0), the trace will exclude any "event group" events.\r
+ *\r
+ * Default value is 0 (excluded) since dependent on event_groups.c\r
+ *****************************************************************************/\r
+#define TRC_CFG_INCLUDE_EVENT_GROUP_EVENTS 1\r
+\r
+ /*****************************************************************************\r
+ * TRC_CFG_INCLUDE_TIMER_EVENTS\r
+ *\r
+ * Macro which should be defined as either zero (0) or one (1).\r
+ *\r
+ * If this is zero (0), the trace will exclude any Timer events.\r
+ *\r
+ * Default value is 0 since dependent on timers.c\r
+ *****************************************************************************/\r
+#define TRC_CFG_INCLUDE_TIMER_EVENTS 1\r
+\r
+ /*****************************************************************************\r
+ * TRC_CFG_INCLUDE_PEND_FUNC_CALL_EVENTS\r
+ *\r
+ * Macro which should be defined as either zero (0) or one (1).\r
+ *\r
+ * If this is zero (0), the trace will exclude any "pending function call" \r
+ * events, such as xTimerPendFunctionCall().\r
+ *\r
+ * Default value is 0 since dependent on timers.c\r
+ *****************************************************************************/\r
+#define TRC_CFG_INCLUDE_PEND_FUNC_CALL_EVENTS 1\r
+\r
+/*******************************************************************************\r
+ * Configuration Macro: TRC_CFG_INCLUDE_STREAM_BUFFER_EVENTS\r
+ *\r
+ * Macro which should be defined as either zero (0) or one (1).\r
+ *\r
+ * If this is zero (0), the trace will exclude any stream buffer or message\r
+ * buffer events.\r
+ *\r
+ * Default value is 0 since dependent on stream_buffer.c (new in FreeRTOS v10)\r
+ ******************************************************************************/\r
+#define TRC_CFG_INCLUDE_STREAM_BUFFER_EVENTS 1\r
\r
/*******************************************************************************\r
* Configuration Macro: TRC_CFG_RECORDER_BUFFER_ALLOCATION\r
******************************************************************************/\r
#define TRC_CFG_RECORDER_BUFFER_ALLOCATION TRC_RECORDER_BUFFER_ALLOCATION_STATIC\r
\r
-/******************************************************************************\r
- * TRC_CFG_FREERTOS_VERSION\r
- *\r
- * Specify what version of FreeRTOS that is used (don't change unless using the\r
- * trace recorder library with an older version of FreeRTOS).\r
- *\r
- * TRC_FREERTOS_VERSION_7_3_OR_7_4 If using FreeRTOS v7.3.0 - v7.4.2\r
- * TRC_FREERTOS_VERSION_7_5_OR_7_6 If using FreeRTOS v7.5.0 - v7.6.0\r
- * TRC_FREERTOS_VERSION_8_X If using FreeRTOS v8.X.X\r
- * TRC_FREERTOS_VERSION_9_X If using FreeRTOS v9.X.X\r
- *****************************************************************************/\r
-#define TRC_CFG_FREERTOS_VERSION TRC_FREERTOS_VERSION_9_X\r
-\r
/******************************************************************************\r
* TRC_CFG_MAX_ISR_NESTING\r
*\r
projects / freertos / blobdiff