/*\r
- FreeRTOS V7.6.0 - Copyright (C) 2013 Real Time Engineers Ltd.\r
+ FreeRTOS V8.0.1 - Copyright (C) 2014 Real Time Engineers Ltd.\r
All rights reserved\r
\r
VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.\r
the terms of the GNU General Public License (version 2) as published by the\r
Free Software Foundation >>!AND MODIFIED BY!<< the FreeRTOS exception.\r
\r
- >>! NOTE: The modification to the GPL is included to allow you to distribute\r
- >>! a combined work that includes FreeRTOS without being obliged to provide\r
- >>! the source code for proprietary components outside of the FreeRTOS\r
- >>! kernel.\r
+ >>! NOTE: The modification to the GPL is included to allow you to !<<\r
+ >>! distribute a combined work that includes FreeRTOS without being !<<\r
+ >>! obliged to provide the source code for proprietary components !<<\r
+ >>! outside of the FreeRTOS kernel. !<<\r
\r
FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY\r
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS\r
/*\r
* See header file for description.\r
*/\r
-StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, pdTASK_CODE pxCode, void *pvParameters )\r
+StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )\r
{\r
/* Simulate the stack frame as it would be created by a context switch\r
interrupt. */\r
#if( configASSERT_DEFINED == 1 )\r
{\r
volatile uint32_t ulOriginalPriority;\r
- volatile int8_t * const pcFirstUserPriorityRegister = ( volatile int8_t * const ) ( portNVIC_IP_REGISTERS_OFFSET_16 + portFIRST_USER_INTERRUPT_NUMBER );\r
+ volatile uint8_t * const pucFirstUserPriorityRegister = ( volatile uint8_t * const ) ( portNVIC_IP_REGISTERS_OFFSET_16 + portFIRST_USER_INTERRUPT_NUMBER );\r
volatile uint8_t ucMaxPriorityValue;\r
\r
/* Determine the maximum priority from which ISR safe FreeRTOS API\r
ensure interrupt entry is as fast and simple as possible.\r
\r
Save the interrupt priority value that is about to be clobbered. */\r
- ulOriginalPriority = *pcFirstUserPriorityRegister;\r
+ ulOriginalPriority = *pucFirstUserPriorityRegister;\r
\r
/* Determine the number of priority bits available. First write to all\r
possible bits. */\r
- *pcFirstUserPriorityRegister = portMAX_8_BIT_VALUE;\r
+ *pucFirstUserPriorityRegister = portMAX_8_BIT_VALUE;\r
\r
/* Read the value back to see how many bits stuck. */\r
- ucMaxPriorityValue = *pcFirstUserPriorityRegister;\r
+ ucMaxPriorityValue = *pucFirstUserPriorityRegister;\r
\r
/* Use the same mask on the maximum system call priority. */\r
ucMaxSysCallPriority = configMAX_SYSCALL_INTERRUPT_PRIORITY & ucMaxPriorityValue;\r
\r
/* Restore the clobbered interrupt priority register to its original\r
value. */\r
- *pcFirstUserPriorityRegister = ulOriginalPriority;\r
+ *pucFirstUserPriorityRegister = ulOriginalPriority;\r
}\r
#endif /* conifgASSERT_DEFINED */\r
\r
#endif /* configUSE_TICKLESS_IDLE */\r
\r
/* Configure SysTick to interrupt at the requested rate. */\r
- portNVIC_SYSTICK_LOAD_REG = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL;;\r
+ portNVIC_SYSTICK_LOAD_REG = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL;\r
portNVIC_SYSTICK_CTRL_REG = ( portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT | portNVIC_SYSTICK_ENABLE_BIT );\r
}\r
/*-----------------------------------------------------------*/\r