/*\r
- FreeRTOS V7.5.1 - Copyright (C) 2013 Real Time Engineers Ltd.\r
+ FreeRTOS V8.0.1 - Copyright (C) 2014 Real Time Engineers Ltd. \r
+ All rights reserved\r
\r
VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.\r
\r
the terms of the GNU General Public License (version 2) as published by the\r
Free Software Foundation >>!AND MODIFIED BY!<< the FreeRTOS exception.\r
\r
- >>! NOTE: The modification to the GPL is included to allow you to distribute\r
- >>! a combined work that includes FreeRTOS without being obliged to provide\r
- >>! the source code for proprietary components outside of the FreeRTOS\r
- >>! kernel.\r
+ >>! NOTE: The modification to the GPL is included to allow you to !<<\r
+ >>! distribute a combined work that includes FreeRTOS without being !<<\r
+ >>! obliged to provide the source code for proprietary components !<<\r
+ >>! outside of the FreeRTOS kernel. !<<\r
\r
FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY\r
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS\r
\r
/* The critical nesting value is initialised to a non zero value to ensure\r
interrupts don't accidentally become enabled before the scheduler is started. */\r
-#define portINITIAL_CRITICAL_NESTING (( unsigned short ) 10)\r
+#define portINITIAL_CRITICAL_NESTING (( uint16_t ) 10)\r
\r
/* Initial PSW value allocated to a newly created task.\r
* 1100011000000000\r
\r
/* We require the address of the pxCurrentTCB variable, but don't want to know\r
any details of its type. */\r
-typedef void tskTCB;\r
-extern volatile tskTCB * volatile pxCurrentTCB;\r
+typedef void TCB_t;\r
+extern volatile TCB_t * volatile pxCurrentTCB;\r
\r
/* Most ports implement critical sections by placing the interrupt flags on\r
the stack before disabling interrupts. Exiting the critical section is then\r
usCriticalNesting will get set to zero when the scheduler starts, but must\r
not be initialised to zero as this will cause problems during the startup\r
sequence. */\r
-volatile unsigned short usCriticalNesting = portINITIAL_CRITICAL_NESTING;\r
+volatile uint16_t usCriticalNesting = portINITIAL_CRITICAL_NESTING;\r
/*-----------------------------------------------------------*/\r
\r
/*\r
*\r
* See the header file portable.h.\r
*/\r
-portSTACK_TYPE *pxPortInitialiseStack( portSTACK_TYPE *pxTopOfStack, pdTASK_CODE pxCode, void *pvParameters )\r
+StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )\r
{\r
-unsigned long *pulLocal;\r
+uint32_t *pulLocal;\r
\r
#if configMEMORY_MODE == 1\r
{\r
pxTopOfStack--;\r
\r
/* Write in the parameter value. */\r
- pulLocal = ( unsigned long * ) pxTopOfStack;\r
- *pulLocal = ( unsigned long ) pvParameters;\r
+ pulLocal = ( uint32_t * ) pxTopOfStack;\r
+ *pulLocal = ( uint32_t ) pvParameters;\r
pxTopOfStack--;\r
\r
/* These values are just spacers. The return address of the function\r
would normally be written here. */\r
- *pxTopOfStack = ( portSTACK_TYPE ) 0xcdcd;\r
+ *pxTopOfStack = ( StackType_t ) 0xcdcd;\r
pxTopOfStack--;\r
- *pxTopOfStack = ( portSTACK_TYPE ) 0xcdcd;\r
+ *pxTopOfStack = ( StackType_t ) 0xcdcd;\r
pxTopOfStack--;\r
\r
/* The start address / PSW value is also written in as a 32bit value,\r
pxTopOfStack--;\r
\r
/* Task function start address combined with the PSW. */\r
- pulLocal = ( unsigned long * ) pxTopOfStack;\r
- *pulLocal = ( ( ( unsigned long ) pxCode ) | ( portPSW << 24UL ) );\r
+ pulLocal = ( uint32_t * ) pxTopOfStack;\r
+ *pulLocal = ( ( ( uint32_t ) pxCode ) | ( portPSW << 24UL ) );\r
pxTopOfStack--;\r
\r
/* An initial value for the AX register. */\r
- *pxTopOfStack = ( portSTACK_TYPE ) 0x1111;\r
+ *pxTopOfStack = ( StackType_t ) 0x1111;\r
pxTopOfStack--;\r
}\r
#else\r
pxTopOfStack--;\r
\r
/* Task function start address combined with the PSW. */\r
- pulLocal = ( unsigned long * ) pxTopOfStack;\r
- *pulLocal = ( ( ( unsigned long ) pxCode ) | ( portPSW << 24UL ) );\r
+ pulLocal = ( uint32_t * ) pxTopOfStack;\r
+ *pulLocal = ( ( ( uint32_t ) pxCode ) | ( portPSW << 24UL ) );\r
pxTopOfStack--;\r
\r
/* The parameter is passed in AX. */\r
- *pxTopOfStack = ( portSTACK_TYPE ) pvParameters;\r
+ *pxTopOfStack = ( StackType_t ) pvParameters;\r
pxTopOfStack--;\r
}\r
#endif\r
\r
/* An initial value for the HL register. */\r
- *pxTopOfStack = ( portSTACK_TYPE ) 0x2222;\r
+ *pxTopOfStack = ( StackType_t ) 0x2222;\r
pxTopOfStack--;\r
\r
/* CS and ES registers. */\r
- *pxTopOfStack = ( portSTACK_TYPE ) 0x0F00;\r
+ *pxTopOfStack = ( StackType_t ) 0x0F00;\r
pxTopOfStack--;\r
\r
/* Finally the remaining general purpose registers DE and BC */\r
- *pxTopOfStack = ( portSTACK_TYPE ) 0xDEDE;\r
+ *pxTopOfStack = ( StackType_t ) 0xDEDE;\r
pxTopOfStack--;\r
- *pxTopOfStack = ( portSTACK_TYPE ) 0xBCBC;\r
+ *pxTopOfStack = ( StackType_t ) 0xBCBC;\r
pxTopOfStack--;\r
\r
/* Finally the critical section nesting count is set to zero when the task\r
first starts. */\r
- *pxTopOfStack = ( portSTACK_TYPE ) portNO_CRITICAL_SECTION_NESTING; \r
+ *pxTopOfStack = ( StackType_t ) portNO_CRITICAL_SECTION_NESTING; \r
\r
/* Return a pointer to the top of the stack we have generated so this can\r
be stored in the task control block for the task. */\r
}\r
/*-----------------------------------------------------------*/\r
\r
-portBASE_TYPE xPortStartScheduler( void )\r
+BaseType_t xPortStartScheduler( void )\r
{\r
/* Setup the hardware to generate the tick. Interrupts are disabled when\r
this function is called. */\r
TMR05 = 0x0000;\r
\r
/* Set the compare match value according to the tick rate we want. */\r
- TDR05 = ( portTickType ) ( configCPU_CLOCK_HZ / configTICK_RATE_HZ );\r
+ TDR05 = ( TickType_t ) ( configCPU_CLOCK_HZ / configTICK_RATE_HZ );\r
\r
/* Set Timer Array Unit Channel 5 output mode */\r
TOM0 &= ~0x0020;\r
projects / freertos / blobdiff