/*\r
- * FreeRTOS Kernel V10.0.1\r
- * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved.\r
+ * FreeRTOS Kernel V10.2.1\r
+ * Copyright (C) 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.\r
*\r
* Permission is hereby granted, free of charge, to any person obtaining a copy of\r
* this software and associated documentation files (the "Software"), to deal in\r
*/\r
#define tskSTACK_FILL_BYTE ( 0xa5U )\r
\r
-/* Sometimes the FreeRTOSConfig.h settings only allow a task to be created using\r
-dynamically allocated RAM, in which case when any task is deleted it is known\r
-that both the task's stack and TCB need to be freed. Sometimes the\r
-FreeRTOSConfig.h settings only allow a task to be created using statically\r
-allocated RAM, in which case when any task is deleted it is known that neither\r
-the task's stack or TCB should be freed. Sometimes the FreeRTOSConfig.h\r
-settings allow a task to be created using either statically or dynamically\r
-allocated RAM, in which case a member of the TCB is used to record whether the\r
-stack and/or TCB were allocated statically or dynamically, so when a task is\r
-deleted the RAM that was allocated dynamically is freed again and no attempt is\r
-made to free the RAM that was allocated statically.\r
-tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE is only true if it is possible for a\r
-task to be created using either statically or dynamically allocated RAM. Note\r
-that if portUSING_MPU_WRAPPERS is 1 then a protected task can be created with\r
-a statically allocated stack and a dynamically allocated TCB.\r
-!!!NOTE!!! If the definition of tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE is\r
-changed then the definition of StaticTask_t must also be updated. */\r
-#define tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE ( ( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) )\r
+/* Bits used to recored how a task's stack and TCB were allocated. */\r
#define tskDYNAMICALLY_ALLOCATED_STACK_AND_TCB ( ( uint8_t ) 0 )\r
#define tskSTATICALLY_ALLOCATED_STACK_ONLY ( ( uint8_t ) 1 )\r
#define tskSTATICALLY_ALLOCATED_STACK_AND_TCB ( ( uint8_t ) 2 )\r
/* If any of the following are set then task stacks are filled with a known\r
value so the high water mark can be determined. If none of the following are\r
set then don't fill the stack so there is no unnecessary dependency on memset. */\r
-#if( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) || ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark == 1 ) )\r
+#if( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) || ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark2 == 1 ) )\r
#define tskSET_NEW_STACKS_TO_KNOWN_VALUE 1\r
#else\r
#define tskSET_NEW_STACKS_TO_KNOWN_VALUE 0\r
* and stores task state information, including a pointer to the task's context\r
* (the task's run time environment, including register values)\r
*/\r
-typedef struct TaskControlBlock_t\r
+typedef struct tskTaskControlBlock /* The old naming convention is used to prevent breaking kernel aware debuggers. */\r
{\r
volatile StackType_t *pxTopOfStack; /*< Points to the location of the last item placed on the tasks stack. THIS MUST BE THE FIRST MEMBER OF THE TCB STRUCT. */\r
\r
responsible for resulting newlib operation. User must be familiar with\r
newlib and must provide system-wide implementations of the necessary\r
stubs. Be warned that (at the time of writing) the current newlib design\r
- implements a system-wide malloc() that must be provided with locks. */\r
+ implements a system-wide malloc() that must be provided with locks.\r
+\r
+ See the third party link http://www.nadler.com/embedded/newlibAndFreeRTOS.html\r
+ for additional information. */\r
struct _reent xNewLib_reent;\r
#endif\r
\r
volatile uint8_t ucNotifyState;\r
#endif\r
\r
- /* See the comments above the definition of\r
+ /* See the comments in FreeRTOS.h with the definition of\r
tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE. */\r
#if( tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE != 0 ) /*lint !e731 !e9029 Macro has been consolidated for readability reasons. */\r
uint8_t ucStaticallyAllocated; /*< Set to pdTRUE if the task is a statically allocated to ensure no attempt is made to free the memory. */\r
uint8_t ucDelayAborted;\r
#endif\r
\r
+ #if( configUSE_POSIX_ERRNO == 1 )\r
+ int iTaskErrno;\r
+ #endif\r
+\r
} tskTCB;\r
\r
/* The old tskTCB name is maintained above then typedefed to the new TCB_t name\r
which static variables must be declared volatile. */\r
PRIVILEGED_DATA TCB_t * volatile pxCurrentTCB = NULL;\r
\r
-/* Lists for ready and blocked tasks. --------------------*/\r
+/* Lists for ready and blocked tasks. --------------------\r
+xDelayedTaskList1 and xDelayedTaskList2 could be move to function scople but\r
+doing so breaks some kernel aware debuggers and debuggers that rely on removing\r
+the static qualifier. */\r
PRIVILEGED_DATA static List_t pxReadyTasksLists[ configMAX_PRIORITIES ];/*< Prioritised ready tasks. */\r
+PRIVILEGED_DATA static List_t xDelayedTaskList1; /*< Delayed tasks. */\r
+PRIVILEGED_DATA static List_t xDelayedTaskList2; /*< Delayed tasks (two lists are used - one for delays that have overflowed the current tick count. */\r
PRIVILEGED_DATA static List_t * volatile pxDelayedTaskList; /*< Points to the delayed task list currently being used. */\r
PRIVILEGED_DATA static List_t * volatile pxOverflowDelayedTaskList; /*< Points to the delayed task list currently being used to hold tasks that have overflowed the current tick count. */\r
PRIVILEGED_DATA static List_t xPendingReadyList; /*< Tasks that have been readied while the scheduler was suspended. They will be moved to the ready list when the scheduler is resumed. */\r
\r
#endif\r
\r
+/* Global POSIX errno. Its value is changed upon context switching to match\r
+the errno of the currently running task. */\r
+#if ( configUSE_POSIX_ERRNO == 1 )\r
+ int FreeRTOS_errno = 0;\r
+#endif\r
+\r
/* Other file private variables. --------------------------------*/\r
PRIVILEGED_DATA static volatile UBaseType_t uxCurrentNumberOfTasks = ( UBaseType_t ) 0U;\r
PRIVILEGED_DATA static volatile TickType_t xTickCount = ( TickType_t ) configINITIAL_TICK_COUNT;\r
PRIVILEGED_DATA static volatile UBaseType_t uxTopReadyPriority = tskIDLE_PRIORITY;\r
PRIVILEGED_DATA static volatile BaseType_t xSchedulerRunning = pdFALSE;\r
-PRIVILEGED_DATA static volatile UBaseType_t uxPendedTicks = ( UBaseType_t ) 0U;\r
+PRIVILEGED_DATA static volatile TickType_t xPendedTicks = ( TickType_t ) 0U;\r
PRIVILEGED_DATA static volatile BaseType_t xYieldPending = pdFALSE;\r
PRIVILEGED_DATA static volatile BaseType_t xNumOfOverflows = ( BaseType_t ) 0;\r
PRIVILEGED_DATA static UBaseType_t uxTaskNumber = ( UBaseType_t ) 0U;\r
accessed from a critical section. */\r
PRIVILEGED_DATA static volatile UBaseType_t uxSchedulerSuspended = ( UBaseType_t ) pdFALSE;\r
\r
+#if ( configGENERATE_RUN_TIME_STATS == 1 )\r
+\r
+ /* Do not move these variables to function scope as doing so prevents the\r
+ code working with debuggers that need to remove the static qualifier. */\r
+ PRIVILEGED_DATA static uint32_t ulTaskSwitchedInTime = 0UL; /*< Holds the value of a timer/counter the last time a task was switched in. */\r
+ PRIVILEGED_DATA static uint32_t ulTotalRunTime = 0UL; /*< Holds the total amount of execution time as defined by the run time counter clock. */\r
+\r
+#endif\r
+\r
/*lint -restore */\r
\r
/*-----------------------------------------------------------*/\r
* This function determines the 'high water mark' of the task stack by\r
* determining how much of the stack remains at the original preset value.\r
*/\r
-#if ( ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark == 1 ) )\r
+#if ( ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark2 == 1 ) )\r
\r
static configSTACK_DEPTH_TYPE prvTaskCheckFreeStackSpace( const uint8_t * pucStackByte ) PRIVILEGED_FUNCTION;\r
\r
task was created statically in case the task is later deleted. */\r
pxNewTCB->ucStaticallyAllocated = tskSTATICALLY_ALLOCATED_STACK_AND_TCB;\r
}\r
- #endif /* configSUPPORT_DYNAMIC_ALLOCATION */\r
+ #endif /* tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE */\r
\r
prvInitialiseNewTask( pxTaskCode, pcName, ulStackDepth, pvParameters, uxPriority, &xReturn, pxNewTCB, NULL );\r
prvAddNewTaskToReadyList( pxNewTCB );\r
task was created statically in case the task is later deleted. */\r
pxNewTCB->ucStaticallyAllocated = tskSTATICALLY_ALLOCATED_STACK_AND_TCB;\r
}\r
- #endif /* configSUPPORT_DYNAMIC_ALLOCATION */\r
+ #endif /* tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE */\r
\r
prvInitialiseNewTask( pxTaskDefinition->pvTaskCode,\r
pxTaskDefinition->pcName,\r
/* Store the stack location in the TCB. */\r
pxNewTCB->pxStack = pxTaskDefinition->puxStackBuffer;\r
\r
- #if( configSUPPORT_STATIC_ALLOCATION == 1 )\r
+ #if( tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE != 0 )\r
{\r
/* Tasks can be created statically or dynamically, so note\r
this task had a statically allocated stack in case it is\r
later deleted. The TCB was allocated dynamically. */\r
pxNewTCB->ucStaticallyAllocated = tskSTATICALLY_ALLOCATED_STACK_ONLY;\r
}\r
- #endif\r
+ #endif /* tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE */\r
\r
prvInitialiseNewTask( pxTaskDefinition->pvTaskCode,\r
pxTaskDefinition->pcName,\r
task was created dynamically in case it is later deleted. */\r
pxNewTCB->ucStaticallyAllocated = tskDYNAMICALLY_ALLOCATED_STACK_AND_TCB;\r
}\r
- #endif /* configSUPPORT_STATIC_ALLOCATION */\r
+ #endif /* tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE */\r
\r
prvInitialiseNewTask( pxTaskCode, pcName, ( uint32_t ) usStackDepth, pvParameters, uxPriority, pxCreatedTask, pxNewTCB, NULL );\r
prvAddNewTaskToReadyList( pxNewTCB );\r
uxPriority &= ~portPRIVILEGE_BIT;\r
#endif /* portUSING_MPU_WRAPPERS == 1 */\r
\r
- configASSERT( pcName );\r
-\r
/* Avoid dependency on memset() if it is not required. */\r
#if( tskSET_NEW_STACKS_TO_KNOWN_VALUE == 1 )\r
{\r
#endif /* portSTACK_GROWTH */\r
\r
/* Store the task name in the TCB. */\r
- for( x = ( UBaseType_t ) 0; x < ( UBaseType_t ) configMAX_TASK_NAME_LEN; x++ )\r
+ if( pcName != NULL )\r
{\r
- pxNewTCB->pcTaskName[ x ] = pcName[ x ];\r
-\r
- /* Don't copy all configMAX_TASK_NAME_LEN if the string is shorter than\r
- configMAX_TASK_NAME_LEN characters just in case the memory after the\r
- string is not accessible (extremely unlikely). */\r
- if( pcName[ x ] == ( char ) 0x00 )\r
- {\r
- break;\r
- }\r
- else\r
+ for( x = ( UBaseType_t ) 0; x < ( UBaseType_t ) configMAX_TASK_NAME_LEN; x++ )\r
{\r
- mtCOVERAGE_TEST_MARKER();\r
+ pxNewTCB->pcTaskName[ x ] = pcName[ x ];\r
+\r
+ /* Don't copy all configMAX_TASK_NAME_LEN if the string is shorter than\r
+ configMAX_TASK_NAME_LEN characters just in case the memory after the\r
+ string is not accessible (extremely unlikely). */\r
+ if( pcName[ x ] == ( char ) 0x00 )\r
+ {\r
+ break;\r
+ }\r
+ else\r
+ {\r
+ mtCOVERAGE_TEST_MARKER();\r
+ }\r
}\r
- }\r
\r
- /* Ensure the name string is terminated in the case that the string length\r
- was greater or equal to configMAX_TASK_NAME_LEN. */\r
- pxNewTCB->pcTaskName[ configMAX_TASK_NAME_LEN - 1 ] = '\0';\r
+ /* Ensure the name string is terminated in the case that the string length\r
+ was greater or equal to configMAX_TASK_NAME_LEN. */\r
+ pxNewTCB->pcTaskName[ configMAX_TASK_NAME_LEN - 1 ] = '\0';\r
+ }\r
+ else\r
+ {\r
+ /* The task has not been given a name, so just ensure there is a NULL\r
+ terminator when it is read out. */\r
+ pxNewTCB->pcTaskName[ 0 ] = 0x00;\r
+ }\r
\r
/* This is used as an array index so must ensure it's not too large. First\r
remove the privilege bit if one is present. */\r
\r
#if ( configUSE_NEWLIB_REENTRANT == 1 )\r
{\r
- /* Initialise this task's Newlib reent structure. */\r
+ /* Initialise this task's Newlib reent structure.\r
+ See the third party link http://www.nadler.com/embedded/newlibAndFreeRTOS.html\r
+ for additional information. */\r
_REENT_INIT_PTR( ( &( pxNewTCB->xNewLib_reent ) ) );\r
}\r
#endif\r
the top of stack variable is updated. */\r
#if( portUSING_MPU_WRAPPERS == 1 )\r
{\r
- pxNewTCB->pxTopOfStack = pxPortInitialiseStack( pxTopOfStack, pxTaskCode, pvParameters, xRunPrivileged );\r
+ /* If the port has capability to detect stack overflow,\r
+ pass the stack end address to the stack initialization\r
+ function as well. */\r
+ #if( portHAS_STACK_OVERFLOW_CHECKING == 1 )\r
+ {\r
+ #if( portSTACK_GROWTH < 0 )\r
+ {\r
+ pxNewTCB->pxTopOfStack = pxPortInitialiseStack( pxTopOfStack, pxNewTCB->pxStack, pxTaskCode, pvParameters, xRunPrivileged );\r
+ }\r
+ #else /* portSTACK_GROWTH */\r
+ {\r
+ pxNewTCB->pxTopOfStack = pxPortInitialiseStack( pxTopOfStack, pxNewTCB->pxEndOfStack, pxTaskCode, pvParameters, xRunPrivileged );\r
+ }\r
+ #endif /* portSTACK_GROWTH */\r
+ }\r
+ #else /* portHAS_STACK_OVERFLOW_CHECKING */\r
+ {\r
+ pxNewTCB->pxTopOfStack = pxPortInitialiseStack( pxTopOfStack, pxTaskCode, pvParameters, xRunPrivileged );\r
+ }\r
+ #endif /* portHAS_STACK_OVERFLOW_CHECKING */\r
}\r
#else /* portUSING_MPU_WRAPPERS */\r
{\r
- pxNewTCB->pxTopOfStack = pxPortInitialiseStack( pxTopOfStack, pxTaskCode, pvParameters );\r
+ /* If the port has capability to detect stack overflow,\r
+ pass the stack end address to the stack initialization\r
+ function as well. */\r
+ #if( portHAS_STACK_OVERFLOW_CHECKING == 1 )\r
+ {\r
+ #if( portSTACK_GROWTH < 0 )\r
+ {\r
+ pxNewTCB->pxTopOfStack = pxPortInitialiseStack( pxTopOfStack, pxNewTCB->pxStack, pxTaskCode, pvParameters );\r
+ }\r
+ #else /* portSTACK_GROWTH */\r
+ {\r
+ pxNewTCB->pxTopOfStack = pxPortInitialiseStack( pxTopOfStack, pxNewTCB->pxEndOfStack, pxTaskCode, pvParameters );\r
+ }\r
+ #endif /* portSTACK_GROWTH */\r
+ }\r
+ #else /* portHAS_STACK_OVERFLOW_CHECKING */\r
+ {\r
+ pxNewTCB->pxTopOfStack = pxPortInitialiseStack( pxTopOfStack, pxTaskCode, pvParameters );\r
+ }\r
+ #endif /* portHAS_STACK_OVERFLOW_CHECKING */\r
}\r
#endif /* portUSING_MPU_WRAPPERS */\r
\r
being deleted. */\r
pxTCB = prvGetTCBFromHandle( xTaskToDelete );\r
\r
- /* Remove task from the ready list. */\r
+ /* Remove task from the ready/delayed list. */\r
if( uxListRemove( &( pxTCB->xStateListItem ) ) == ( UBaseType_t ) 0 )\r
{\r
taskRESET_READY_PRIORITY( pxTCB->uxPriority );\r
check the xTasksWaitingTermination list. */\r
++uxDeletedTasksWaitingCleanUp;\r
\r
+ /* Call the delete hook before portPRE_TASK_DELETE_HOOK() as\r
+ portPRE_TASK_DELETE_HOOK() does not return in the Win32 port. */\r
+ traceTASK_DELETE( pxTCB );\r
+\r
/* The pre-delete hook is primarily for the Windows simulator,\r
in which Windows specific clean up operations are performed,\r
after which it is not possible to yield away from this task -\r
else\r
{\r
--uxCurrentNumberOfTasks;\r
+ traceTASK_DELETE( pxTCB );\r
prvDeleteTCB( pxTCB );\r
\r
/* Reset the next expected unblock time in case it referred to\r
the task that has just been deleted. */\r
prvResetNextTaskUnblockTime();\r
}\r
-\r
- traceTASK_DELETE( pxTCB );\r
}\r
taskEXIT_CRITICAL();\r
\r
#endif /* INCLUDE_vTaskDelay */\r
/*-----------------------------------------------------------*/\r
\r
-#if( ( INCLUDE_eTaskGetState == 1 ) || ( configUSE_TRACE_FACILITY == 1 ) )\r
+#if( ( INCLUDE_eTaskGetState == 1 ) || ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_xTaskAbortDelay == 1 ) )\r
\r
eTaskState eTaskGetState( TaskHandle_t xTask )\r
{\r
#if ( configUSE_NEWLIB_REENTRANT == 1 )\r
{\r
/* Switch Newlib's _impure_ptr variable to point to the _reent\r
- structure specific to the task that will run first. */\r
+ structure specific to the task that will run first.\r
+ See the third party link http://www.nadler.com/embedded/newlibAndFreeRTOS.html\r
+ for additional information. */\r
_impure_ptr = &( pxCurrentTCB->xNewLib_reent );\r
}\r
#endif /* configUSE_NEWLIB_REENTRANT */\r
post in the FreeRTOS support forum before reporting this as a bug! -\r
http://goo.gl/wu4acr */\r
++uxSchedulerSuspended;\r
+ portMEMORY_BARRIER();\r
}\r
/*----------------------------------------------------------*/\r
\r
{\r
TCB_t *pxTCB = NULL;\r
BaseType_t xAlreadyYielded = pdFALSE;\r
+TickType_t xTicksToNextUnblockTime;\r
\r
/* If uxSchedulerSuspended is zero then this function does not match a\r
previous call to vTaskSuspendAll(). */\r
they should be processed now. This ensures the tick count does\r
not slip, and that any delayed tasks are resumed at the correct\r
time. */\r
+ while( xPendedTicks > ( TickType_t ) 0 )\r
{\r
- UBaseType_t uxPendedCounts = uxPendedTicks; /* Non-volatile copy. */\r
+ /* Calculate how far into the future the next task will\r
+ leave the Blocked state because its timeout expired. If\r
+ there are no tasks due to leave the blocked state between\r
+ the time now and the time at which the tick count overflows\r
+ then xNextTaskUnblockTime will the tick overflow time.\r
+ This means xNextTaskUnblockTime can never be less than\r
+ xTickCount, and the following can therefore not\r
+ underflow. */\r
+ configASSERT( xNextTaskUnblockTime >= xTickCount );\r
+ xTicksToNextUnblockTime = xNextTaskUnblockTime - xTickCount;\r
\r
- if( uxPendedCounts > ( UBaseType_t ) 0U )\r
+ /* Don't want to move the tick count more than the number\r
+ of ticks that are pending, so cap if necessary. */\r
+ if( xTicksToNextUnblockTime > xPendedTicks )\r
{\r
- do\r
- {\r
- if( xTaskIncrementTick() != pdFALSE )\r
- {\r
- xYieldPending = pdTRUE;\r
- }\r
- else\r
- {\r
- mtCOVERAGE_TEST_MARKER();\r
- }\r
- --uxPendedCounts;\r
- } while( uxPendedCounts > ( UBaseType_t ) 0U );\r
+ xTicksToNextUnblockTime = xPendedTicks;\r
+ }\r
\r
- uxPendedTicks = 0;\r
+ if( xTicksToNextUnblockTime == 0 )\r
+ {\r
+ /* xTicksToNextUnblockTime could be zero if the tick\r
+ count is about to overflow and xTicksToNetUnblockTime\r
+ holds the time at which the tick count will overflow\r
+ (rather than the time at which the next task will\r
+ unblock). Set to 1 otherwise xPendedTicks won't be\r
+ decremented below. */\r
+ xTicksToNextUnblockTime = ( TickType_t ) 1;\r
}\r
- else\r
+ else if( xTicksToNextUnblockTime > ( TickType_t ) 1 )\r
{\r
- mtCOVERAGE_TEST_MARKER();\r
+ /* Move the tick count one short of the next unblock\r
+ time, then call xTaskIncrementTick() to move the tick\r
+ count up to the next unblock time to unblock the task,\r
+ if any. This will also swap the blocked task and\r
+ overflow blocked task lists if necessary. */\r
+ xTickCount += ( xTicksToNextUnblockTime - ( TickType_t ) 1 );\r
}\r
+ xYieldPending |= xTaskIncrementTick();\r
+\r
+ /* Adjust for the number of ticks just added to\r
+ xTickCount and go around the loop again if\r
+ xTicksToCatchUp is still greater than 0. */\r
+ xPendedTicks -= xTicksToNextUnblockTime;\r
}\r
\r
if( xYieldPending != pdFALSE )\r
#endif /* configUSE_TICKLESS_IDLE */\r
/*----------------------------------------------------------*/\r
\r
+BaseType_t xTaskCatchUpTicks( TickType_t xTicksToCatchUp )\r
+{\r
+BaseType_t xYieldRequired = pdFALSE;\r
+\r
+ /* Must not be called with the scheduler suspended as the implementation\r
+ relies on xPendedTicks being wound down to 0 in xTaskResumeAll(). */\r
+ configASSERT( uxSchedulerSuspended == 0 );\r
+\r
+ /* Use xPendedTicks to mimic xTicksToCatchUp number of ticks occurring when\r
+ the scheduler is suspended so the ticks are executed in xTaskResumeAll(). */\r
+ vTaskSuspendAll();\r
+ xPendedTicks += xTicksToCatchUp;\r
+ xYieldRequired = xTaskResumeAll();\r
+\r
+ return xYieldRequired;\r
+}\r
+/*----------------------------------------------------------*/\r
+\r
+#if ( INCLUDE_xTaskAbortDelay == 1 )\r
+\r
+ BaseType_t xTaskAbortDelayFromISR( TaskHandle_t xTask, BaseType_t * const pxHigherPriorityTaskWoken )\r
+ {\r
+ TCB_t *pxTCB = xTask;\r
+ BaseType_t xReturn;\r
+ UBaseType_t uxSavedInterruptStatus;\r
+\r
+ configASSERT( pxTCB );\r
+\r
+ /* RTOS ports that support interrupt nesting have the concept of a maximum\r
+ system call (or maximum API call) interrupt priority. Interrupts that are\r
+ above the maximum system call priority are kept permanently enabled, even\r
+ when the RTOS kernel is in a critical section, but cannot make any calls to\r
+ FreeRTOS API functions. If configASSERT() is defined in FreeRTOSConfig.h\r
+ then portASSERT_IF_INTERRUPT_PRIORITY_INVALID() will result in an assertion\r
+ failure if a FreeRTOS API function is called from an interrupt that has been\r
+ assigned a priority above the configured maximum system call priority.\r
+ Only FreeRTOS functions that end in FromISR can be called from interrupts\r
+ that have been assigned a priority at or (logically) below the maximum\r
+ system call interrupt priority. FreeRTOS maintains a separate interrupt\r
+ safe API to ensure interrupt entry is as fast and as simple as possible.\r
+ More information (albeit Cortex-M specific) is provided on the following\r
+ link: http://www.freertos.org/RTOS-Cortex-M3-M4.html */\r
+ portASSERT_IF_INTERRUPT_PRIORITY_INVALID();\r
+\r
+ uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();\r
+ {\r
+ /* A task can only be prematurely removed from the Blocked state if\r
+ it is actually in the Blocked state. */\r
+ if( eTaskGetState( xTask ) == eBlocked )\r
+ {\r
+ xReturn = pdPASS;\r
+\r
+ /* Remove the reference to the task from the blocked list. A higher\r
+ priority interrupt won't touch the xStateListItem because of the\r
+ critical section. */\r
+ ( void ) uxListRemove( &( pxTCB->xStateListItem ) );\r
+\r
+ /* Is the task waiting on an event also? If so remove it from\r
+ the event list too. */\r
+ if( listLIST_ITEM_CONTAINER( &( pxTCB->xEventListItem ) ) != NULL )\r
+ {\r
+ ( void ) uxListRemove( &( pxTCB->xEventListItem ) );\r
+\r
+ /* This lets the task know it was forcibly removed from the\r
+ blocked state so it should not re-evaluate its block time and\r
+ then block again. */\r
+ pxTCB->ucDelayAborted = pdTRUE;\r
+ }\r
+ else\r
+ {\r
+ mtCOVERAGE_TEST_MARKER();\r
+ }\r
+\r
+ /* Place the unblocked task into the appropriate ready list. */\r
+ prvAddTaskToReadyList( pxTCB );\r
+\r
+ if( pxTCB->uxPriority > pxCurrentTCB->uxPriority )\r
+ {\r
+ if( pxHigherPriorityTaskWoken != NULL )\r
+ {\r
+ /* Pend the yield to be performed when the scheduler\r
+ is unsuspended. */\r
+ *pxHigherPriorityTaskWoken = pdTRUE;\r
+ }\r
+ }\r
+ else\r
+ {\r
+ mtCOVERAGE_TEST_MARKER();\r
+ }\r
+ }\r
+ else\r
+ {\r
+ xReturn = pdFAIL;\r
+ }\r
+ }\r
+ portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );\r
+\r
+ return xReturn;\r
+ }\r
+\r
+#endif\r
+/*----------------------------------------------------------*/\r
+\r
#if ( INCLUDE_xTaskAbortDelay == 1 )\r
\r
BaseType_t xTaskAbortDelay( TaskHandle_t xTask )\r
if( listLIST_ITEM_CONTAINER( &( pxTCB->xEventListItem ) ) != NULL )\r
{\r
( void ) uxListRemove( &( pxTCB->xEventListItem ) );\r
+\r
+ /* This lets the task know it was forcibly removed from the\r
+ blocked state so it should not re-evaluate its block time and\r
+ then block again. */\r
pxTCB->ucDelayAborted = pdTRUE;\r
}\r
else\r
{\r
/* Guard against the tick hook being called when the pended tick\r
count is being unwound (when the scheduler is being unlocked). */\r
- if( uxPendedTicks == ( UBaseType_t ) 0U )\r
+ if( xPendedTicks == ( TickType_t ) 0 )\r
{\r
vApplicationTickHook();\r
}\r
}\r
}\r
#endif /* configUSE_TICK_HOOK */\r
+\r
+ #if ( configUSE_PREEMPTION == 1 )\r
+ {\r
+ if( xYieldPending != pdFALSE )\r
+ {\r
+ xSwitchRequired = pdTRUE;\r
+ }\r
+ else\r
+ {\r
+ mtCOVERAGE_TEST_MARKER();\r
+ }\r
+ }\r
+ #endif /* configUSE_PREEMPTION */\r
}\r
else\r
{\r
- ++uxPendedTicks;\r
+ ++xPendedTicks;\r
\r
/* The tick hook gets called at regular intervals, even if the\r
scheduler is locked. */\r
#endif\r
}\r
\r
- #if ( configUSE_PREEMPTION == 1 )\r
- {\r
- if( xYieldPending != pdFALSE )\r
- {\r
- xSwitchRequired = pdTRUE;\r
- }\r
- else\r
- {\r
- mtCOVERAGE_TEST_MARKER();\r
- }\r
- }\r
- #endif /* configUSE_PREEMPTION */\r
-\r
return xSwitchRequired;\r
}\r
/*-----------------------------------------------------------*/\r
\r
TaskHookFunction_t xTaskGetApplicationTaskTag( TaskHandle_t xTask )\r
{\r
- TCB_t *xTCB;\r
+ TCB_t *pxTCB;\r
TaskHookFunction_t xReturn;\r
\r
- /* If xTask is NULL then we are setting our own task hook. */\r
- if( xTask == NULL )\r
- {\r
- xTCB = ( TCB_t * ) pxCurrentTCB;\r
- }\r
- else\r
- {\r
- xTCB = ( TCB_t * ) xTask;\r
- }\r
+ /* If xTask is NULL then set the calling task's hook. */\r
+ pxTCB = prvGetTCBFromHandle( xTask );\r
\r
/* Save the hook function in the TCB. A critical section is required as\r
the value can be accessed from an interrupt. */\r
taskENTER_CRITICAL();\r
{\r
- xReturn = xTCB->pxTaskTag;\r
+ xReturn = pxTCB->pxTaskTag;\r
}\r
taskEXIT_CRITICAL();\r
\r
#endif /* configUSE_APPLICATION_TASK_TAG */\r
/*-----------------------------------------------------------*/\r
\r
+#if ( configUSE_APPLICATION_TASK_TAG == 1 )\r
+\r
+ TaskHookFunction_t xTaskGetApplicationTaskTagFromISR( TaskHandle_t xTask )\r
+ {\r
+ TCB_t *pxTCB;\r
+ TaskHookFunction_t xReturn;\r
+ UBaseType_t uxSavedInterruptStatus;\r
+\r
+ /* If xTask is NULL then set the calling task's hook. */\r
+ pxTCB = prvGetTCBFromHandle( xTask );\r
+\r
+ /* Save the hook function in the TCB. A critical section is required as\r
+ the value can be accessed from an interrupt. */\r
+ uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();\r
+ {\r
+ xReturn = pxTCB->pxTaskTag;\r
+ }\r
+ portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );\r
+\r
+ return xReturn;\r
+ }\r
+\r
+#endif /* configUSE_APPLICATION_TASK_TAG */\r
+/*-----------------------------------------------------------*/\r
+\r
#if ( configUSE_APPLICATION_TASK_TAG == 1 )\r
\r
BaseType_t xTaskCallApplicationTaskHook( TaskHandle_t xTask, void *pvParameter )\r
/* If xTask is NULL then we are calling our own task hook. */\r
if( xTask == NULL )\r
{\r
- xTCB = ( TCB_t * ) pxCurrentTCB;\r
+ xTCB = pxCurrentTCB;\r
}\r
else\r
{\r
\r
#if ( configGENERATE_RUN_TIME_STATS == 1 )\r
{\r
- PRIVILEGED_DATA static uint32_t ulTaskSwitchedInTime = 0UL; /*< Holds the value of a timer/counter the last time a task was switched in. */\r
- PRIVILEGED_DATA static uint32_t ulTotalRunTime = 0UL; /*< Holds the total amount of execution time as defined by the run time counter clock. */\r
-\r
- #ifdef portALT_GET_RUN_TIME_COUNTER_VALUE\r
- portALT_GET_RUN_TIME_COUNTER_VALUE( ulTotalRunTime );\r
- #else\r
- ulTotalRunTime = portGET_RUN_TIME_COUNTER_VALUE();\r
- #endif\r
+ #ifdef portALT_GET_RUN_TIME_COUNTER_VALUE\r
+ portALT_GET_RUN_TIME_COUNTER_VALUE( ulTotalRunTime );\r
+ #else\r
+ ulTotalRunTime = portGET_RUN_TIME_COUNTER_VALUE();\r
+ #endif\r
\r
- /* Add the amount of time the task has been running to the\r
- accumulated time so far. The time the task started running was\r
- stored in ulTaskSwitchedInTime. Note that there is no overflow\r
- protection here so count values are only valid until the timer\r
- overflows. The guard against negative values is to protect\r
- against suspect run time stat counter implementations - which\r
- are provided by the application, not the kernel. */\r
- if( ulTotalRunTime > ulTaskSwitchedInTime )\r
- {\r
- pxCurrentTCB->ulRunTimeCounter += ( ulTotalRunTime - ulTaskSwitchedInTime );\r
- }\r
- else\r
- {\r
- mtCOVERAGE_TEST_MARKER();\r
- }\r
- ulTaskSwitchedInTime = ulTotalRunTime;\r
+ /* Add the amount of time the task has been running to the\r
+ accumulated time so far. The time the task started running was\r
+ stored in ulTaskSwitchedInTime. Note that there is no overflow\r
+ protection here so count values are only valid until the timer\r
+ overflows. The guard against negative values is to protect\r
+ against suspect run time stat counter implementations - which\r
+ are provided by the application, not the kernel. */\r
+ if( ulTotalRunTime > ulTaskSwitchedInTime )\r
+ {\r
+ pxCurrentTCB->ulRunTimeCounter += ( ulTotalRunTime - ulTaskSwitchedInTime );\r
+ }\r
+ else\r
+ {\r
+ mtCOVERAGE_TEST_MARKER();\r
+ }\r
+ ulTaskSwitchedInTime = ulTotalRunTime;\r
}\r
#endif /* configGENERATE_RUN_TIME_STATS */\r
\r
/* Check for stack overflow, if configured. */\r
taskCHECK_FOR_STACK_OVERFLOW();\r
\r
+ /* Before the currently running task is switched out, save its errno. */\r
+ #if( configUSE_POSIX_ERRNO == 1 )\r
+ {\r
+ pxCurrentTCB->iTaskErrno = FreeRTOS_errno;\r
+ }\r
+ #endif\r
+\r
/* Select a new task to run using either the generic C or port\r
optimised asm code. */\r
taskSELECT_HIGHEST_PRIORITY_TASK(); /*lint !e9079 void * is used as this macro is used with timers and co-routines too. Alignment is known to be fine as the type of the pointer stored and retrieved is the same. */\r
traceTASK_SWITCHED_IN();\r
\r
+ /* After the new task is switched in, update the global errno. */\r
+ #if( configUSE_POSIX_ERRNO == 1 )\r
+ {\r
+ FreeRTOS_errno = pxCurrentTCB->iTaskErrno;\r
+ }\r
+ #endif\r
+\r
#if ( configUSE_NEWLIB_REENTRANT == 1 )\r
{\r
/* Switch Newlib's _impure_ptr variable to point to the _reent\r
- structure specific to this task. */\r
+ structure specific to this task.\r
+ See the third party link http://www.nadler.com/embedded/newlibAndFreeRTOS.html\r
+ for additional information. */\r
_impure_ptr = &( pxCurrentTCB->xNewLib_reent );\r
}\r
#endif /* configUSE_NEWLIB_REENTRANT */\r
{\r
( void ) uxListRemove( &( pxUnblockedTCB->xStateListItem ) );\r
prvAddTaskToReadyList( pxUnblockedTCB );\r
+\r
+ #if( configUSE_TICKLESS_IDLE != 0 )\r
+ {\r
+ /* If a task is blocked on a kernel object then xNextTaskUnblockTime\r
+ might be set to the blocked task's time out time. If the task is\r
+ unblocked for a reason other than a timeout xNextTaskUnblockTime is\r
+ normally left unchanged, because it is automatically reset to a new\r
+ value when the tick count equals xNextTaskUnblockTime. However if\r
+ tickless idling is used it might be more important to enter sleep mode\r
+ at the earliest possible time - so reset xNextTaskUnblockTime here to\r
+ ensure it is updated at the earliest possible time. */\r
+ prvResetNextTaskUnblockTime();\r
+ }\r
+ #endif\r
}\r
else\r
{\r
xReturn = pdFALSE;\r
}\r
\r
- #if( configUSE_TICKLESS_IDLE != 0 )\r
- {\r
- /* If a task is blocked on a kernel object then xNextTaskUnblockTime\r
- might be set to the blocked task's time out time. If the task is\r
- unblocked for a reason other than a timeout xNextTaskUnblockTime is\r
- normally left unchanged, because it is automatically reset to a new\r
- value when the tick count equals xNextTaskUnblockTime. However if\r
- tickless idling is used it might be more important to enter sleep mode\r
- at the earliest possible time - so reset xNextTaskUnblockTime here to\r
- ensure it is updated at the earliest possible time. */\r
- prvResetNextTaskUnblockTime();\r
- }\r
- #endif\r
-\r
return xReturn;\r
}\r
/*-----------------------------------------------------------*/\r
configASSERT( pxUnblockedTCB );\r
( void ) uxListRemove( pxEventListItem );\r
\r
+ #if( configUSE_TICKLESS_IDLE != 0 )\r
+ {\r
+ /* If a task is blocked on a kernel object then xNextTaskUnblockTime\r
+ might be set to the blocked task's time out time. If the task is\r
+ unblocked for a reason other than a timeout xNextTaskUnblockTime is\r
+ normally left unchanged, because it is automatically reset to a new\r
+ value when the tick count equals xNextTaskUnblockTime. However if\r
+ tickless idling is used it might be more important to enter sleep mode\r
+ at the earliest possible time - so reset xNextTaskUnblockTime here to\r
+ ensure it is updated at the earliest possible time. */\r
+ prvResetNextTaskUnblockTime();\r
+ }\r
+ #endif\r
+\r
/* Remove the task from the delayed list and add it to the ready list. The\r
scheduler is suspended so interrupts will not be accessing the ready\r
lists. */\r
\r
if( xTask != NULL )\r
{\r
- pxTCB = ( TCB_t * ) xTask;\r
+ pxTCB = xTask;\r
uxReturn = pxTCB->uxTaskNumber;\r
}\r
else\r
\r
if( xTask != NULL )\r
{\r
- pxTCB = ( TCB_t * ) xTask;\r
+ pxTCB = xTask;\r
pxTCB->uxTaskNumber = uxHandle;\r
}\r
}\r
/* In case a task that has a secure context deletes itself, in which case\r
the idle task is responsible for deleting the task's secure context, if\r
any. */\r
- portTASK_CALLS_SECURE_FUNCTIONS();\r
+ portALLOCATE_SECURE_CONTEXT( configMINIMAL_SECURE_STACK_SIZE );\r
\r
for( ;; )\r
{\r
const UBaseType_t uxNonApplicationTasks = 1;\r
eSleepModeStatus eReturn = eStandardSleep;\r
\r
+ /* This function must be called from a critical section. */\r
+\r
if( listCURRENT_LIST_LENGTH( &xPendingReadyList ) != 0 )\r
{\r
/* A task was made ready while the scheduler was suspended. */\r
static void prvInitialiseTaskLists( void )\r
{\r
UBaseType_t uxPriority;\r
-PRIVILEGED_DATA static List_t xDelayedTaskList1; /*< Delayed tasks. */\r
-PRIVILEGED_DATA static List_t xDelayedTaskList2; /*< Delayed tasks (two lists are used - one for delays that have overflowed the current tick count. */\r
\r
for( uxPriority = ( UBaseType_t ) 0U; uxPriority < ( UBaseType_t ) configMAX_PRIORITIES; uxPriority++ )\r
{\r
#endif /* configUSE_TRACE_FACILITY */\r
/*-----------------------------------------------------------*/\r
\r
-#if ( ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark == 1 ) )\r
+#if ( ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark2 == 1 ) )\r
\r
static configSTACK_DEPTH_TYPE prvTaskCheckFreeStackSpace( const uint8_t * pucStackByte )\r
{\r
return ( configSTACK_DEPTH_TYPE ) ulCount;\r
}\r
\r
-#endif /* ( ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark == 1 ) ) */\r
+#endif /* ( ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark2 == 1 ) ) */\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( INCLUDE_uxTaskGetStackHighWaterMark2 == 1 )\r
+\r
+ /* uxTaskGetStackHighWaterMark() and uxTaskGetStackHighWaterMark2() are the\r
+ same except for their return type. Using configSTACK_DEPTH_TYPE allows the\r
+ user to determine the return type. It gets around the problem of the value\r
+ overflowing on 8-bit types without breaking backward compatibility for\r
+ applications that expect an 8-bit return type. */\r
+ configSTACK_DEPTH_TYPE uxTaskGetStackHighWaterMark2( TaskHandle_t xTask )\r
+ {\r
+ TCB_t *pxTCB;\r
+ uint8_t *pucEndOfStack;\r
+ configSTACK_DEPTH_TYPE uxReturn;\r
+\r
+ /* uxTaskGetStackHighWaterMark() and uxTaskGetStackHighWaterMark2() are\r
+ the same except for their return type. Using configSTACK_DEPTH_TYPE\r
+ allows the user to determine the return type. It gets around the\r
+ problem of the value overflowing on 8-bit types without breaking\r
+ backward compatibility for applications that expect an 8-bit return\r
+ type. */\r
+\r
+ pxTCB = prvGetTCBFromHandle( xTask );\r
+\r
+ #if portSTACK_GROWTH < 0\r
+ {\r
+ pucEndOfStack = ( uint8_t * ) pxTCB->pxStack;\r
+ }\r
+ #else\r
+ {\r
+ pucEndOfStack = ( uint8_t * ) pxTCB->pxEndOfStack;\r
+ }\r
+ #endif\r
+\r
+ uxReturn = prvTaskCheckFreeStackSpace( pucEndOfStack );\r
+\r
+ return uxReturn;\r
+ }\r
+\r
+#endif /* INCLUDE_uxTaskGetStackHighWaterMark2 */\r
/*-----------------------------------------------------------*/\r
\r
#if ( INCLUDE_uxTaskGetStackHighWaterMark == 1 )\r
portCLEAN_UP_TCB( pxTCB );\r
\r
/* Free up the memory allocated by the scheduler for the task. It is up\r
- to the task to free any memory allocated at the application level. */\r
+ to the task to free any memory allocated at the application level.\r
+ See the third party link http://www.nadler.com/embedded/newlibAndFreeRTOS.html\r
+ for additional information. */\r
#if ( configUSE_NEWLIB_REENTRANT == 1 )\r
{\r
_reclaim_reent( &( pxTCB->xNewLib_reent ) );\r
{\r
if( uxListRemove( &( pxMutexHolderTCB->xStateListItem ) ) == ( UBaseType_t ) 0 )\r
{\r
- taskRESET_READY_PRIORITY( pxMutexHolderTCB->uxPriority );\r
+ /* It is known that the task is in its ready list so\r
+ there is no need to check again and the port level\r
+ reset macro can be called directly. */\r
+ portRESET_READY_PRIORITY( pxMutexHolderTCB->uxPriority, uxTopReadyPriority );\r
}\r
else\r
{\r
the mutex. If the mutex is held by a task then it cannot be\r
given from an interrupt, and if a mutex is given by the\r
holding task then it must be the running state task. Remove\r
- the holding task from the ready list. */\r
+ the holding task from the ready/delayed list. */\r
if( uxListRemove( &( pxTCB->xStateListItem ) ) == ( UBaseType_t ) 0 )\r
{\r
taskRESET_READY_PRIORITY( pxTCB->uxPriority );\r
{\r
if( uxListRemove( &( pxTCB->xStateListItem ) ) == ( UBaseType_t ) 0 )\r
{\r
- taskRESET_READY_PRIORITY( pxTCB->uxPriority );\r
+ /* It is known that the task is in its ready list so\r
+ there is no need to check again and the port level\r
+ reset macro can be called directly. */\r
+ portRESET_READY_PRIORITY( pxTCB->uxPriority, uxTopReadyPriority );\r
}\r
else\r
{\r
\r
/* Write the rest of the string. */\r
sprintf( pcWriteBuffer, "\t%c\t%u\t%u\t%u\r\n", cStatus, ( unsigned int ) pxTaskStatusArray[ x ].uxCurrentPriority, ( unsigned int ) pxTaskStatusArray[ x ].usStackHighWaterMark, ( unsigned int ) pxTaskStatusArray[ x ].xTaskNumber ); /*lint !e586 sprintf() allowed as this is compiled with many compilers and this is a utility function only - not part of the core kernel implementation. */\r
- pcWriteBuffer += strlen( pcWriteBuffer ); /*lint !e9016 Pointer arithmetic ok on char pointers. */\r
+ pcWriteBuffer += strlen( pcWriteBuffer ); /*lint !e9016 Pointer arithmetic ok on char pointers especially as in this case where it best denotes the intent of the code. */\r
}\r
\r
/* Free the array again. NOTE! If configSUPPORT_DYNAMIC_ALLOCATION\r
#endif\r
}\r
\r
- pcWriteBuffer += strlen( pcWriteBuffer ); /*lint !e9016 Pointer arithmetic ok on char pointers. */\r
+ pcWriteBuffer += strlen( pcWriteBuffer ); /*lint !e9016 Pointer arithmetic ok on char pointers especially as in this case where it best denotes the intent of the code. */\r
}\r
}\r
else\r
\r
#if ( configUSE_MUTEXES == 1 )\r
\r
- void *pvTaskIncrementMutexHeldCount( void )\r
+ TaskHandle_t pvTaskIncrementMutexHeldCount( void )\r
{\r
/* If xSemaphoreCreateMutex() is called before any tasks have been created\r
then pxCurrentTCB will be NULL. */\r
uint8_t ucOriginalNotifyState;\r
\r
configASSERT( xTaskToNotify );\r
- pxTCB = ( TCB_t * ) xTaskToNotify;\r
+ pxTCB = xTaskToNotify;\r
\r
taskENTER_CRITICAL();\r
{\r
\r
default:\r
/* Should not get here if all enums are handled.\r
- Artificially force an assert. */\r
- configASSERT( ( volatile uint32_t ) 0 );\r
+ Artificially force an assert by testing a value the\r
+ compiler can't assume is const. */\r
+ configASSERT( pxTCB->ulNotifiedValue == ~0UL );\r
\r
break;\r
}\r
http://www.freertos.org/RTOS-Cortex-M3-M4.html */\r
portASSERT_IF_INTERRUPT_PRIORITY_INVALID();\r
\r
- pxTCB = ( TCB_t * ) xTaskToNotify;\r
+ pxTCB = xTaskToNotify;\r
\r
uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();\r
{\r
\r
default:\r
/* Should not get here if all enums are handled.\r
- Artificially force an assert. */\r
- configASSERT( ( volatile uint32_t ) 0 );\r
+ Artificially force an assert by testing a value the\r
+ compiler can't assume is const. */\r
+ configASSERT( pxTCB->ulNotifiedValue == ~0UL );\r
break;\r
}\r
\r
http://www.freertos.org/RTOS-Cortex-M3-M4.html */\r
portASSERT_IF_INTERRUPT_PRIORITY_INVALID();\r
\r
- pxTCB = ( TCB_t * ) xTaskToNotify;\r
+ pxTCB = xTaskToNotify;\r
\r
uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();\r
{\r
}\r
\r
#endif /* configUSE_TASK_NOTIFICATIONS */\r
-\r
/*-----------------------------------------------------------*/\r
\r
#if( configUSE_TASK_NOTIFICATIONS == 1 )\r
#endif /* configUSE_TASK_NOTIFICATIONS */\r
/*-----------------------------------------------------------*/\r
\r
+#if( configUSE_TASK_NOTIFICATIONS == 1 )\r
+\r
+ uint32_t ulTaskNotifyValueClear( TaskHandle_t xTask, uint32_t ulBitsToClear )\r
+ {\r
+ TCB_t *pxTCB;\r
+ uint32_t ulReturn;\r
+\r
+ /* If null is passed in here then it is the calling task that is having\r
+ its notification state cleared. */\r
+ pxTCB = prvGetTCBFromHandle( xTask );\r
+\r
+ taskENTER_CRITICAL();\r
+ {\r
+ /* Return the notification as it was before the bits were cleared,\r
+ then clear the bit mask. */\r
+ ulReturn = pxCurrentTCB->ulNotifiedValue;\r
+ pxTCB->ulNotifiedValue &= ~ulBitsToClear;\r
+ }\r
+ taskEXIT_CRITICAL();\r
+\r
+ return ulReturn;\r
+ }\r
+\r
+#endif /* configUSE_TASK_NOTIFICATIONS */\r
+/*-----------------------------------------------------------*/\r
+\r
+#if( ( configGENERATE_RUN_TIME_STATS == 1 ) && ( INCLUDE_xTaskGetIdleTaskHandle == 1 ) )\r
+\r
+ uint32_t ulTaskGetIdleRunTimeCounter( void )\r
+ {\r
+ return xIdleTaskHandle->ulRunTimeCounter;\r
+ }\r
+\r
+#endif\r
+/*-----------------------------------------------------------*/\r
\r
static void prvAddCurrentTaskToDelayedList( TickType_t xTicksToWait, const BaseType_t xCanBlockIndefinitely )\r
{\r
\r
#include "freertos_tasks_c_additions.h"\r
\r
- static void freertos_tasks_c_additions_init( void )\r
- {\r
- #ifdef FREERTOS_TASKS_C_ADDITIONS_INIT\r
+ #ifdef FREERTOS_TASKS_C_ADDITIONS_INIT\r
+ static void freertos_tasks_c_additions_init( void )\r
+ {\r
FREERTOS_TASKS_C_ADDITIONS_INIT();\r
- #endif\r
- }\r
+ }\r
+ #endif\r
\r
#endif\r
\r
projects / freertos / blobdiff