X-Git-Url: https://git.sur5r.net/?p=freertos;a=blobdiff_plain;f=FreeRTOS-Plus%2FSource%2FFreeRTOS-Plus-TCP%2Fportable%2FNetworkInterface%2FSTM32Fxx%2Fstm32fxx_hal_eth.c;fp=FreeRTOS-Plus%2FSource%2FFreeRTOS-Plus-TCP%2Fportable%2FNetworkInterface%2FSTM32Fxx%2Fstm32fxx_hal_eth.c;h=0000000000000000000000000000000000000000;hp=dad16aaf8a2779cf8bbc158f371aa27e0aac9424;hb=b15dfacb6026af3b0ba697e5753844923b468d2b;hpb=4334233a064299a09d167a497889d3860932a587 diff --git a/FreeRTOS-Plus/Source/FreeRTOS-Plus-TCP/portable/NetworkInterface/STM32Fxx/stm32fxx_hal_eth.c b/FreeRTOS-Plus/Source/FreeRTOS-Plus-TCP/portable/NetworkInterface/STM32Fxx/stm32fxx_hal_eth.c deleted file mode 100644 index dad16aaf8..000000000 --- a/FreeRTOS-Plus/Source/FreeRTOS-Plus-TCP/portable/NetworkInterface/STM32Fxx/stm32fxx_hal_eth.c +++ /dev/null @@ -1,1468 +0,0 @@ -/** - ****************************************************************************** - * @file stm32fxx_hal_eth.c - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief ETH HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Ethernet (ETH) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral Control functions - * + Peripheral State and Errors functions - * - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - (#)Declare a ETH_HandleTypeDef handle structure, for example: - ETH_HandleTypeDef heth; - - (#)Fill parameters of Init structure in heth handle - - (#)Call HAL_ETH_Init() API to initialize the Ethernet peripheral (MAC, DMA, ...) - - (#)Initialize the ETH low level resources through the HAL_ETH_MspInit() API: - (##) Enable the Ethernet interface clock using - (+++) __HAL_RCC_ETHMAC_CLK_ENABLE(); - (+++) __HAL_RCC_ETHMACTX_CLK_ENABLE(); - (+++) __HAL_RCC_ETHMACRX_CLK_ENABLE(); - - (##) Initialize the related GPIO clocks - (##) Configure Ethernet pin-out - (##) Configure Ethernet NVIC interrupt (IT mode) - - (#)Initialize Ethernet DMA Descriptors in chain mode and point to allocated buffers: - (##) HAL_ETH_DMATxDescListInit(); for Transmission process - (##) HAL_ETH_DMARxDescListInit(); for Reception process - - (#)Enable MAC and DMA transmission and reception: - (##) HAL_ETH_Start(); - - (#)Prepare ETH DMA TX Descriptors and give the hand to ETH DMA to transfer - the frame to MAC TX FIFO: - (##) HAL_ETH_TransmitFrame(); - - (#)Poll for a received frame in ETH RX DMA Descriptors and get received - frame parameters - (##) HAL_ETH_GetReceivedFrame(); (should be called into an infinite loop) - - (#) Get a received frame when an ETH RX interrupt occurs: - (##) HAL_ETH_GetReceivedFrame_IT(); (called in IT mode only) - - (#) Communicate with external PHY device: - (##) Read a specific register from the PHY - HAL_ETH_ReadPHYRegister(); - (##) Write data to a specific RHY register: - HAL_ETH_WritePHYRegister(); - - (#) Configure the Ethernet MAC after ETH peripheral initialization - HAL_ETH_ConfigMAC(); all MAC parameters should be filled. - - (#) Configure the Ethernet DMA after ETH peripheral initialization - HAL_ETH_ConfigDMA(); all DMA parameters should be filled. - - -@- The PTP protocol and the DMA descriptors ring mode are not supported - in this driver - - @endverbatim - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2015 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ - -#if defined(STM32F7xx) - #include "stm32f7xx_hal.h" - #define stm_is_F7 1 -#elif defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) - #include "stm32f4xx_hal.h" - #define stm_is_F4 1 -#elif defined(STM32F2xx) - #include "stm32f2xx_hal.h" - #define stm_is_F2 1 -#else - #error For what part should this be compiled? -#endif - -#include "stm32fxx_hal_eth.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup ETH ETH - * @brief ETH HAL module driver - * @{ - */ - -#if !defined( ARRAY_SIZE ) - #define ARRAY_SIZE( x ) ( sizeof ( x ) / sizeof ( x )[ 0 ] ) -#endif - -#ifdef HAL_ETH_MODULE_ENABLED - -#if( stm_is_F2 != 0 || stm_is_F4 != 0 || stm_is_F7 ) - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @defgroup ETH_Private_Constants ETH Private Constants - * @{ - */ - -/** - * @} - */ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @defgroup ETH_Private_Functions ETH Private Functions - * @{ - */ -static void ETH_MACDMAConfig(ETH_HandleTypeDef *heth, uint32_t err); -static void ETH_MACAddressConfig(ETH_HandleTypeDef *heth, uint32_t MacAddr, uint8_t *Addr); -static void ETH_MACReceptionEnable(ETH_HandleTypeDef *heth); -static void ETH_MACReceptionDisable(ETH_HandleTypeDef *heth); -static void ETH_MACTransmissionEnable(ETH_HandleTypeDef *heth); -static void ETH_MACTransmissionDisable(ETH_HandleTypeDef *heth); -static void ETH_DMATransmissionEnable(ETH_HandleTypeDef *heth); -static void ETH_DMATransmissionDisable(ETH_HandleTypeDef *heth); -static void ETH_DMAReceptionEnable(ETH_HandleTypeDef *heth); -static void ETH_DMAReceptionDisable(ETH_HandleTypeDef *heth); -static void ETH_FlushTransmitFIFO(ETH_HandleTypeDef *heth); - -/** - * @} - */ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup ETH_Exported_Functions ETH Exported Functions - * @{ - */ - -/** @defgroup ETH_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * - @verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Initialize and configure the Ethernet peripheral - (+) De-initialize the Ethernet peripheral - - @endverbatim - * @{ - */ -extern void vMACBProbePhy ( void ); - -/** - * @brief Initializes the Ethernet MAC and DMA according to default - * parameters. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_Init(ETH_HandleTypeDef *heth) -{ - uint32_t tmpreg = 0uL; - uint32_t hclk = 60000000uL; - uint32_t err = ETH_SUCCESS; - - /* Check the ETH peripheral state */ - if( heth == NULL ) - { - return HAL_ERROR; - } - - /* Check parameters */ - assert_param(IS_ETH_AUTONEGOTIATION(heth->Init.AutoNegotiation)); - assert_param(IS_ETH_RX_MODE(heth->Init.RxMode)); - assert_param(IS_ETH_CHECKSUM_MODE(heth->Init.ChecksumMode)); - assert_param(IS_ETH_MEDIA_INTERFACE(heth->Init.MediaInterface)); - - if( heth->State == HAL_ETH_STATE_RESET ) - { - /* Init the low level hardware : GPIO, CLOCK, NVIC. */ - HAL_ETH_MspInit( heth ); - } - - /* Enable SYSCFG Clock */ - __HAL_RCC_SYSCFG_CLK_ENABLE(); - - /* Select MII or RMII Mode*/ - SYSCFG->PMC &= ~(SYSCFG_PMC_MII_RMII_SEL); - SYSCFG->PMC |= (uint32_t)heth->Init.MediaInterface; - - /* Ethernet Software reset */ - /* Set the SWR bit: resets all MAC subsystem internal registers and logic */ - /* After reset all the registers holds their respective reset values */ - /* Also enable EDFE: Enhanced descriptor format enable. */ - heth->Instance->DMABMR |= ETH_DMABMR_SR | ETH_DMABMR_EDE; - - /* Wait for software reset */ - while ((heth->Instance->DMABMR & ETH_DMABMR_SR) != (uint32_t)RESET) - { - /* If your program hangs here, please check the value of 'ipconfigUSE_RMII'. */ - } - - /*-------------------------------- MAC Initialization ----------------------*/ - /* Get the ETHERNET MACMIIAR value */ - tmpreg = heth->Instance->MACMIIAR; - /* Clear CSR Clock Range CR[2:0] bits */ - tmpreg &= ETH_MACMIIAR_CR_MASK; - - /* Get hclk frequency value (e.g. 168,000,000) */ - hclk = HAL_RCC_GetHCLKFreq(); - - /* Set CR bits depending on hclk value */ - if(( hclk >= 20000000uL ) && ( hclk < 35000000uL ) ) - { - /* CSR Clock Range between 20-35 MHz */ - tmpreg |= ( uint32_t) ETH_MACMIIAR_CR_Div16; - } - else if( ( hclk >= 35000000uL ) && ( hclk < 60000000uL ) ) - { - /* CSR Clock Range between 35-60 MHz */ - tmpreg |= ( uint32_t ) ETH_MACMIIAR_CR_Div26; - } - else if( ( hclk >= 60000000uL ) && ( hclk < 100000000uL ) ) - { - /* CSR Clock Range between 60-100 MHz */ - tmpreg |= (uint32_t)ETH_MACMIIAR_CR_Div42; - } - else if( ( hclk >= 100000000uL ) && ( hclk < 150000000uL ) ) - { - /* CSR Clock Range between 100-150 MHz */ - tmpreg |= (uint32_t)ETH_MACMIIAR_CR_Div62; - } - else /* ( ( hclk >= 150000000uL ) && ( hclk <= 183000000uL ) ) */ - { - /* CSR Clock Range between 150-183 MHz */ - tmpreg |= (uint32_t)ETH_MACMIIAR_CR_Div102; - } - - /* Write to ETHERNET MAC MIIAR: Configure the ETHERNET CSR Clock Range */ - heth->Instance->MACMIIAR = (uint32_t)tmpreg; - - /* Initialise the MACB and set all PHY properties */ - vMACBProbePhy(); - - /* Config MAC and DMA */ - ETH_MACDMAConfig(heth, err); - - /* Set ETH HAL State to Ready */ - heth->State= HAL_ETH_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief De-Initializes the ETH peripheral. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_DeInit(ETH_HandleTypeDef *heth) -{ - /* Set the ETH peripheral state to BUSY */ - heth->State = HAL_ETH_STATE_BUSY; - - /* De-Init the low level hardware : GPIO, CLOCK, NVIC. */ - HAL_ETH_MspDeInit( heth ); - - /* Set ETH HAL state to Disabled */ - heth->State= HAL_ETH_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK( heth ); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Initializes the ETH MSP. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval None - */ -__weak void HAL_ETH_MspInit(ETH_HandleTypeDef *heth) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_ETH_MspInit could be implemented in the user file - */ - ( void ) heth; -} - -/** - * @brief DeInitializes ETH MSP. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval None - */ -__weak void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_ETH_MspDeInit could be implemented in the user file - */ - ( void ) heth; -} - -/** - * @} - */ - -/** @defgroup ETH_Exported_Functions_Group2 IO operation functions - * @brief Data transfers functions - * - @verbatim - ============================================================================== - ##### IO operation functions ##### - ============================================================================== - [..] This section provides functions allowing to: - (+) Transmit a frame - HAL_ETH_TransmitFrame(); - (+) Receive a frame - HAL_ETH_GetReceivedFrame(); - HAL_ETH_GetReceivedFrame_IT(); - (+) Read from an External PHY register - HAL_ETH_ReadPHYRegister(); - (+) Write to an External PHY register - HAL_ETH_WritePHYRegister(); - - @endverbatim - - * @{ - */ - -#define ETH_DMA_ALL_INTS \ - ( ETH_DMA_IT_TST | ETH_DMA_IT_PMT | ETH_DMA_IT_MMC | ETH_DMA_IT_NIS | ETH_DMA_IT_AIS | ETH_DMA_IT_ER | \ - ETH_DMA_IT_FBE | ETH_DMA_IT_ET | ETH_DMA_IT_RWT | ETH_DMA_IT_RPS | ETH_DMA_IT_RBU | ETH_DMA_IT_R | \ - ETH_DMA_IT_TU | ETH_DMA_IT_RO | ETH_DMA_IT_TJT | ETH_DMA_IT_TPS | ETH_DMA_IT_T ) - -//#define ETH_DMA_ALL_INTS ETH_DMA_IT_RBU | ETH_DMA_FLAG_T | ETH_DMA_FLAG_AIS - -#define INT_MASK ( ( uint32_t ) ~ ( ETH_DMA_IT_TBU ) ) -void HAL_ETH_IRQHandler(ETH_HandleTypeDef *heth) -{ - uint32_t dmasr; - - dmasr = heth->Instance->DMASR & ETH_DMA_ALL_INTS; - heth->Instance->DMASR = dmasr; - - /* Frame received */ - if( ( dmasr & ( ETH_DMA_FLAG_R | ETH_DMA_IT_RBU ) ) != 0 ) - { - /* Receive complete callback */ - HAL_ETH_RxCpltCallback( heth ); - } - /* Frame transmitted */ - if( ( dmasr & ( ETH_DMA_FLAG_T ) ) != 0 ) - { - /* Transfer complete callback */ - HAL_ETH_TxCpltCallback( heth ); - } - - /* ETH DMA Error */ - if( ( dmasr & ( ETH_DMA_FLAG_AIS ) ) != 0 ) - { - /* Ethernet Error callback */ - HAL_ETH_ErrorCallback( heth ); - } -} - -/** - * @brief Tx Transfer completed callbacks. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval None - */ -__weak void HAL_ETH_TxCpltCallback(ETH_HandleTypeDef *heth) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_ETH_TxCpltCallback could be implemented in the user file - */ - ( void ) heth; -} - -/** - * @brief Rx Transfer completed callbacks. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval None - */ -__weak void HAL_ETH_RxCpltCallback(ETH_HandleTypeDef *heth) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_ETH_TxCpltCallback could be implemented in the user file - */ - ( void ) heth; -} - -/** - * @brief Ethernet transfer error callbacks - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval None - */ -__weak void HAL_ETH_ErrorCallback(ETH_HandleTypeDef *heth) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_ETH_TxCpltCallback could be implemented in the user file - */ - ( void ) heth; -} - -/** - * @brief Reads a PHY register - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param PHYReg: PHY register address, is the index of one of the 32 PHY register. - * This parameter can be one of the following values: - * PHY_BCR: Transceiver Basic Control Register, - * PHY_BSR: Transceiver Basic Status Register. - * More PHY register could be read depending on the used PHY - * @param RegValue: PHY register value - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t *RegValue) -{ -uint32_t tmpreg = 0uL; -uint32_t tickstart = 0uL; -HAL_StatusTypeDef xResult; - - /* Check parameters */ - assert_param(IS_ETH_PHY_ADDRESS(heth->Init.PhyAddress)); - - /* Check the ETH peripheral state */ - if( heth->State == HAL_ETH_STATE_BUSY_RD ) - { - xResult = HAL_BUSY; - } - else - { - __HAL_LOCK( heth ); - - /* Set ETH HAL State to BUSY_RD */ - heth->State = HAL_ETH_STATE_BUSY_RD; - - /* Get the ETHERNET MACMIIAR value */ - tmpreg = heth->Instance->MACMIIAR; - - /* Keep only the CSR Clock Range CR[2:0] bits value */ - tmpreg &= ~ETH_MACMIIAR_CR_MASK; - - /* Prepare the MII address register value */ - tmpreg |= ( ( ( uint32_t )heth->Init.PhyAddress << 11) & ETH_MACMIIAR_PA ); /* Set the PHY device address */ - tmpreg |= ( ( ( uint32_t )PHYReg << 6 ) & ETH_MACMIIAR_MR ); /* Set the PHY register address */ - tmpreg &= ~ETH_MACMIIAR_MW; /* Set the read mode */ - tmpreg |= ETH_MACMIIAR_MB; /* Set the MII Busy bit */ - - /* Write the result value into the MII Address register */ - heth->Instance->MACMIIAR = tmpreg; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Check for the Busy flag */ - while( 1 ) - { - tmpreg = heth->Instance->MACMIIAR; - - if( ( tmpreg & ETH_MACMIIAR_MB ) == 0uL ) - { - /* Get MACMIIDR value */ - *RegValue = ( uint32_t ) heth->Instance->MACMIIDR; - xResult = HAL_OK; - break; - } - /* Check for the Timeout */ - if( ( HAL_GetTick( ) - tickstart ) > PHY_READ_TO ) - { - xResult = HAL_TIMEOUT; - break; - } - - } - - /* Set ETH HAL State to READY */ - heth->State = HAL_ETH_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK( heth ); - } - - /* Return function status */ - return xResult; -} - -/** - * @brief Writes to a PHY register. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param PHYReg: PHY register address, is the index of one of the 32 PHY register. - * This parameter can be one of the following values: - * PHY_BCR: Transceiver Control Register. - * More PHY register could be written depending on the used PHY - * @param RegValue: the value to write - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_WritePHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t RegValue) -{ -uint32_t tmpreg = 0; -uint32_t tickstart = 0; -HAL_StatusTypeDef xResult; - - /* Check parameters */ - assert_param( IS_ETH_PHY_ADDRESS( heth->Init.PhyAddress ) ); - - /* Check the ETH peripheral state */ - if( heth->State == HAL_ETH_STATE_BUSY_WR ) - { - xResult = HAL_BUSY; - } - else - { - __HAL_LOCK( heth ); - - /* Set ETH HAL State to BUSY_WR */ - heth->State = HAL_ETH_STATE_BUSY_WR; - - /* Get the ETHERNET MACMIIAR value */ - tmpreg = heth->Instance->MACMIIAR; - - /* Keep only the CSR Clock Range CR[2:0] bits value */ - tmpreg &= ~ETH_MACMIIAR_CR_MASK; - - /* Prepare the MII register address value */ - tmpreg |= ( ( ( uint32_t ) heth->Init.PhyAddress << 11 ) & ETH_MACMIIAR_PA ); /* Set the PHY device address */ - tmpreg |= ( ( ( uint32_t ) PHYReg << 6 ) & ETH_MACMIIAR_MR ); /* Set the PHY register address */ - tmpreg |= ETH_MACMIIAR_MW; /* Set the write mode */ - tmpreg |= ETH_MACMIIAR_MB; /* Set the MII Busy bit */ - - /* Give the value to the MII data register */ - heth->Instance->MACMIIDR = ( uint16_t ) RegValue; - - /* Write the result value into the MII Address register */ - heth->Instance->MACMIIAR = tmpreg; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Check for the Busy flag */ - while( 1 ) - { - tmpreg = heth->Instance->MACMIIAR; - - if( ( tmpreg & ETH_MACMIIAR_MB ) == 0ul ) - { - xResult = HAL_OK; - break; - } - /* Check for the Timeout */ - if( ( HAL_GetTick( ) - tickstart ) > PHY_WRITE_TO ) - { - xResult = HAL_TIMEOUT; - break; - } - } - - /* Set ETH HAL State to READY */ - heth->State = HAL_ETH_STATE_READY; - /* Process Unlocked */ - __HAL_UNLOCK( heth ); - } - - /* Return function status */ - return xResult; -} - -/** - * @} - */ - -/** @defgroup ETH_Exported_Functions_Group3 Peripheral Control functions - * @brief Peripheral Control functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Enable MAC and DMA transmission and reception. - HAL_ETH_Start(); - (+) Disable MAC and DMA transmission and reception. - HAL_ETH_Stop(); - (+) Set the MAC configuration in runtime mode - HAL_ETH_ConfigMAC(); - (+) Set the DMA configuration in runtime mode - HAL_ETH_ConfigDMA(); - -@endverbatim - * @{ - */ - - /** - * @brief Enables Ethernet MAC and DMA reception/transmission - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_Start( ETH_HandleTypeDef *heth ) -{ - /* Process Locked */ - __HAL_LOCK( heth ); - - /* Set the ETH peripheral state to BUSY */ - heth->State = HAL_ETH_STATE_BUSY; - - /* Enable transmit state machine of the MAC for transmission on the MII */ - ETH_MACTransmissionEnable( heth ); - - /* Enable receive state machine of the MAC for reception from the MII */ - ETH_MACReceptionEnable( heth ); - - /* Flush Transmit FIFO */ - ETH_FlushTransmitFIFO( heth ); - - /* Start DMA transmission */ - ETH_DMATransmissionEnable( heth ); - - /* Start DMA reception */ - ETH_DMAReceptionEnable( heth ); - - /* Set the ETH state to READY*/ - heth->State= HAL_ETH_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK( heth ); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stop Ethernet MAC and DMA reception/transmission - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_Stop(ETH_HandleTypeDef *heth) -{ - /* Process Locked */ - __HAL_LOCK( heth ); - - /* Set the ETH peripheral state to BUSY */ - heth->State = HAL_ETH_STATE_BUSY; - - /* Stop DMA transmission */ - ETH_DMATransmissionDisable( heth ); - - /* Stop DMA reception */ - ETH_DMAReceptionDisable( heth ); - - /* Disable receive state machine of the MAC for reception from the MII */ - ETH_MACReceptionDisable( heth ); - - /* Flush Transmit FIFO */ - ETH_FlushTransmitFIFO( heth ); - - /* Disable transmit state machine of the MAC for transmission on the MII */ - ETH_MACTransmissionDisable( heth ); - - /* Set the ETH state*/ - heth->State = HAL_ETH_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK( heth ); - - /* Return function status */ - return HAL_OK; -} - -static void vRegisterDelay() -{ -uint32_t uxCount; - /* - * Regarding the HAL delay functions, I noticed that HAL delay is being used to workaround the - * "Successive write operations to the same register might not be fully taken into account" errata. - * The workaround requires a delay of four TX_CLK/RX_CLK clock cycles. For a 10 Mbit connection, - * these clocks are running at 2.5 MHz, so this delay would be at most 1.6 microseconds. - * 180 Mhz = 288 loops - * 168 Mhz = 269 loops - * 100 Mhz = 160 loops - * 84 Mhz = 134 loops - */ - #define WAIT_TIME_NS 1600uL /* 1.6 microseconds */ - #define CPU_MAX_FREQ SystemCoreClock /* 84, 100, 168 or 180 MHz */ - uint32_t NOP_COUNT = ( WAIT_TIME_NS * ( CPU_MAX_FREQ / 1000uL ) ) / 1000000uL; - for( uxCount = NOP_COUNT; uxCount > 0uL; uxCount-- ) - { - __NOP(); - } -} - -static void prvWriteMACFCR( ETH_HandleTypeDef *heth, uint32_t ulValue) -{ - /* Enable the MAC transmission */ - heth->Instance->MACFCR = ulValue; - - /* Wait until the write operation will be taken into account: - at least four TX_CLK/RX_CLK clock cycles. - Read it back, wait a ms and */ - ( void ) heth->Instance->MACFCR; - - vRegisterDelay(); - - heth->Instance->MACFCR = ulValue; -} - -static void prvWriteDMAOMR( ETH_HandleTypeDef *heth, uint32_t ulValue) -{ - /* Enable the MAC transmission */ - heth->Instance->DMAOMR = ulValue; - - /* Wait until the write operation will be taken into account: - at least four TX_CLK/RX_CLK clock cycles. - Read it back, wait a ms and */ - ( void ) heth->Instance->DMAOMR; - - vRegisterDelay(); - - heth->Instance->DMAOMR = ulValue; -} - -static void prvWriteMACCR( ETH_HandleTypeDef *heth, uint32_t ulValue) -{ - /* Enable the MAC transmission */ - heth->Instance->MACCR = ulValue; - - /* Wait until the write operation will be taken into account: - at least four TX_CLK/RX_CLK clock cycles. - Read it back, wait a ms and */ - ( void ) heth->Instance->MACCR; - - vRegisterDelay(); - - heth->Instance->MACCR = ulValue; -} - -/** - * @brief Set ETH MAC Configuration. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param macconf: MAC Configuration structure - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_ConfigMAC(ETH_HandleTypeDef *heth, ETH_MACInitTypeDef *macconf) -{ - uint32_t tmpreg = 0uL; - - /* Process Locked */ - __HAL_LOCK( heth ); - - /* Set the ETH peripheral state to BUSY */ - heth->State= HAL_ETH_STATE_BUSY; - - assert_param(IS_ETH_SPEED(heth->Init.Speed)); - assert_param(IS_ETH_DUPLEX_MODE(heth->Init.DuplexMode)); - - if (macconf != NULL) - { - /* Check the parameters */ - assert_param(IS_ETH_WATCHDOG(macconf->Watchdog)); - assert_param(IS_ETH_JABBER(macconf->Jabber)); - assert_param(IS_ETH_INTER_FRAME_GAP(macconf->InterFrameGap)); - assert_param(IS_ETH_CARRIER_SENSE(macconf->CarrierSense)); - assert_param(IS_ETH_RECEIVE_OWN(macconf->ReceiveOwn)); - assert_param(IS_ETH_LOOPBACK_MODE(macconf->LoopbackMode)); - assert_param(IS_ETH_CHECKSUM_OFFLOAD(macconf->ChecksumOffload)); - assert_param(IS_ETH_RETRY_TRANSMISSION(macconf->RetryTransmission)); - assert_param(IS_ETH_AUTOMATIC_PADCRC_STRIP(macconf->AutomaticPadCRCStrip)); - assert_param(IS_ETH_BACKOFF_LIMIT(macconf->BackOffLimit)); - assert_param(IS_ETH_DEFERRAL_CHECK(macconf->DeferralCheck)); - assert_param(IS_ETH_RECEIVE_ALL(macconf->ReceiveAll)); - assert_param(IS_ETH_SOURCE_ADDR_FILTER(macconf->SourceAddrFilter)); - assert_param(IS_ETH_CONTROL_FRAMES(macconf->PassControlFrames)); - assert_param(IS_ETH_BROADCAST_FRAMES_RECEPTION(macconf->BroadcastFramesReception)); - assert_param(IS_ETH_DESTINATION_ADDR_FILTER(macconf->DestinationAddrFilter)); - assert_param(IS_ETH_PROMISCUOUS_MODE(macconf->PromiscuousMode)); - assert_param(IS_ETH_MULTICAST_FRAMES_FILTER(macconf->MulticastFramesFilter)); - assert_param(IS_ETH_UNICAST_FRAMES_FILTER(macconf->UnicastFramesFilter)); - assert_param(IS_ETH_PAUSE_TIME(macconf->PauseTime)); - assert_param(IS_ETH_ZEROQUANTA_PAUSE(macconf->ZeroQuantaPause)); - assert_param(IS_ETH_PAUSE_LOW_THRESHOLD(macconf->PauseLowThreshold)); - assert_param(IS_ETH_UNICAST_PAUSE_FRAME_DETECT(macconf->UnicastPauseFrameDetect)); - assert_param(IS_ETH_RECEIVE_FLOWCONTROL(macconf->ReceiveFlowControl)); - assert_param(IS_ETH_TRANSMIT_FLOWCONTROL(macconf->TransmitFlowControl)); - assert_param(IS_ETH_VLAN_TAG_COMPARISON(macconf->VLANTagComparison)); - assert_param(IS_ETH_VLAN_TAG_IDENTIFIER(macconf->VLANTagIdentifier)); - - /*------------------------ ETHERNET MACCR Configuration --------------------*/ - /* Get the ETHERNET MACCR value */ - tmpreg = heth->Instance->MACCR; - /* Clear WD, PCE, PS, TE and RE bits */ - tmpreg &= ETH_MACCR_CLEAR_MASK; - - tmpreg |= (uint32_t)( - macconf->Watchdog | - macconf->Jabber | - macconf->InterFrameGap | - macconf->CarrierSense | - heth->Init.Speed | - macconf->ReceiveOwn | - macconf->LoopbackMode | - heth->Init.DuplexMode | - macconf->ChecksumOffload | - macconf->RetryTransmission | - macconf->AutomaticPadCRCStrip | - macconf->BackOffLimit | - macconf->DeferralCheck); - - /* Write to ETHERNET MACCR */ - prvWriteMACCR( heth, tmpreg ); - - /*----------------------- ETHERNET MACFFR Configuration --------------------*/ - /* Write to ETHERNET MACFFR */ - heth->Instance->MACFFR = (uint32_t)( - macconf->ReceiveAll | - macconf->SourceAddrFilter | - macconf->PassControlFrames | - macconf->BroadcastFramesReception | - macconf->DestinationAddrFilter | - macconf->PromiscuousMode | - macconf->MulticastFramesFilter | - macconf->UnicastFramesFilter); - - /* Wait until the write operation will be taken into account : - at least four TX_CLK/RX_CLK clock cycles */ - tmpreg = heth->Instance->MACFFR; - vRegisterDelay(); - heth->Instance->MACFFR = tmpreg; - - /*--------------- ETHERNET MACHTHR and MACHTLR Configuration ---------------*/ - /* Write to ETHERNET MACHTHR */ - heth->Instance->MACHTHR = (uint32_t)macconf->HashTableHigh; - - /* Write to ETHERNET MACHTLR */ - heth->Instance->MACHTLR = (uint32_t)macconf->HashTableLow; - /*----------------------- ETHERNET MACFCR Configuration --------------------*/ - - /* Get the ETHERNET MACFCR value */ - tmpreg = heth->Instance->MACFCR; - /* Clear xx bits */ - tmpreg &= ETH_MACFCR_CLEAR_MASK; - - tmpreg |= (uint32_t)(( - macconf->PauseTime << 16) | - macconf->ZeroQuantaPause | - macconf->PauseLowThreshold | - macconf->UnicastPauseFrameDetect | - macconf->ReceiveFlowControl | - macconf->TransmitFlowControl); - - /* Write to ETHERNET MACFCR */ - prvWriteMACFCR( heth, tmpreg ); - - /*----------------------- ETHERNET MACVLANTR Configuration -----------------*/ - heth->Instance->MACVLANTR = (uint32_t)(macconf->VLANTagComparison | - macconf->VLANTagIdentifier); - - /* Wait until the write operation will be taken into account : - at least four TX_CLK/RX_CLK clock cycles */ - tmpreg = heth->Instance->MACVLANTR; - vRegisterDelay(); - heth->Instance->MACVLANTR = tmpreg; - } - else /* macconf == NULL : here we just configure Speed and Duplex mode */ - { - /*------------------------ ETHERNET MACCR Configuration --------------------*/ - /* Get the ETHERNET MACCR value */ - tmpreg = heth->Instance->MACCR; - - /* Clear FES and DM bits */ - tmpreg &= ~( ( uint32_t ) 0x00004800uL ); - - tmpreg |= (uint32_t)(heth->Init.Speed | heth->Init.DuplexMode); - - /* Write to ETHERNET MACCR */ - prvWriteMACCR( heth, tmpreg ); - } - - /* Set the ETH state to Ready */ - heth->State= HAL_ETH_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK( heth ); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Sets ETH DMA Configuration. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param dmaconf: DMA Configuration structure - * @retval HAL status - */ -HAL_StatusTypeDef HAL_ETH_ConfigDMA(ETH_HandleTypeDef *heth, ETH_DMAInitTypeDef *dmaconf) -{ - uint32_t tmpreg = 0uL; - - /* Process Locked */ - __HAL_LOCK( heth ); - - /* Set the ETH peripheral state to BUSY */ - heth->State= HAL_ETH_STATE_BUSY; - - /* Check parameters */ - assert_param(IS_ETH_DROP_TCPIP_CHECKSUM_FRAME(dmaconf->DropTCPIPChecksumErrorFrame)); - assert_param(IS_ETH_RECEIVE_STORE_FORWARD(dmaconf->ReceiveStoreForward)); - assert_param(IS_ETH_FLUSH_RECEIVE_FRAME(dmaconf->FlushReceivedFrame)); - assert_param(IS_ETH_TRANSMIT_STORE_FORWARD(dmaconf->TransmitStoreForward)); - assert_param(IS_ETH_TRANSMIT_THRESHOLD_CONTROL(dmaconf->TransmitThresholdControl)); - assert_param(IS_ETH_FORWARD_ERROR_FRAMES(dmaconf->ForwardErrorFrames)); - assert_param(IS_ETH_FORWARD_UNDERSIZED_GOOD_FRAMES(dmaconf->ForwardUndersizedGoodFrames)); - assert_param(IS_ETH_RECEIVE_THRESHOLD_CONTROL(dmaconf->ReceiveThresholdControl)); - assert_param(IS_ETH_SECOND_FRAME_OPERATE(dmaconf->SecondFrameOperate)); - assert_param(IS_ETH_ADDRESS_ALIGNED_BEATS(dmaconf->AddressAlignedBeats)); - assert_param(IS_ETH_FIXED_BURST(dmaconf->FixedBurst)); - assert_param(IS_ETH_RXDMA_BURST_LENGTH(dmaconf->RxDMABurstLength)); - assert_param(IS_ETH_TXDMA_BURST_LENGTH(dmaconf->TxDMABurstLength)); - assert_param(IS_ETH_ENHANCED_DESCRIPTOR_FORMAT(dmaconf->EnhancedDescriptorFormat)); - assert_param(IS_ETH_DMA_DESC_SKIP_LENGTH(dmaconf->DescriptorSkipLength)); - assert_param(IS_ETH_DMA_ARBITRATION_ROUNDROBIN_RXTX(dmaconf->DMAArbitration)); - - /*----------------------- ETHERNET DMAOMR Configuration --------------------*/ - /* Get the ETHERNET DMAOMR value */ - tmpreg = heth->Instance->DMAOMR; - /* Clear xx bits */ - tmpreg &= ETH_DMAOMR_CLEAR_MASK; - - tmpreg |= (uint32_t)( - dmaconf->DropTCPIPChecksumErrorFrame | - dmaconf->ReceiveStoreForward | - dmaconf->FlushReceivedFrame | - dmaconf->TransmitStoreForward | - dmaconf->TransmitThresholdControl | - dmaconf->ForwardErrorFrames | - dmaconf->ForwardUndersizedGoodFrames | - dmaconf->ReceiveThresholdControl | - dmaconf->SecondFrameOperate); - - /* Write to ETHERNET DMAOMR */ - prvWriteDMAOMR( heth, tmpreg ); - - /*----------------------- ETHERNET DMABMR Configuration --------------------*/ - heth->Instance->DMABMR = (uint32_t)(dmaconf->AddressAlignedBeats | - dmaconf->FixedBurst | - dmaconf->RxDMABurstLength | /* !! if 4xPBL is selected for Tx or Rx it is applied for the other */ - dmaconf->TxDMABurstLength | - dmaconf->EnhancedDescriptorFormat | - (dmaconf->DescriptorSkipLength << 2) | - dmaconf->DMAArbitration | - ETH_DMABMR_USP); /* Enable use of separate PBL for Rx and Tx */ - - /* Wait until the write operation will be taken into account: - at least four TX_CLK/RX_CLK clock cycles */ - tmpreg = heth->Instance->DMABMR; - vRegisterDelay(); - heth->Instance->DMABMR = tmpreg; - - /* Set the ETH state to Ready */ - heth->State= HAL_ETH_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK( heth ); - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup ETH_Exported_Functions_Group4 Peripheral State functions - * @brief Peripheral State functions - * - @verbatim - =============================================================================== - ##### Peripheral State functions ##### - =============================================================================== - [..] - This subsection permits to get in run-time the status of the peripheral - and the data flow. - (+) Get the ETH handle state: - HAL_ETH_GetState(); - - - @endverbatim - * @{ - */ - -/** - * @brief Return the ETH HAL state - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval HAL state - */ -HAL_ETH_StateTypeDef HAL_ETH_GetState(ETH_HandleTypeDef *heth) -{ - /* Return ETH state */ - return heth->State; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup ETH_Private_Functions - * @{ - */ - -/** - * @brief Configures Ethernet MAC and DMA with default parameters. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param err: Ethernet Init error - * @retval HAL status - */ -static void ETH_MACDMAConfig(ETH_HandleTypeDef *heth, uint32_t err) -{ - ETH_MACInitTypeDef macinit; - ETH_DMAInitTypeDef dmainit; - uint32_t tmpreg = 0uL; - - if (err != ETH_SUCCESS) /* Auto-negotiation failed */ - { - /* Set Ethernet duplex mode to Full-duplex */ - heth->Init.DuplexMode = ETH_MODE_FULLDUPLEX; - - /* Set Ethernet speed to 100M */ - heth->Init.Speed = ETH_SPEED_100M; - } - - /* Ethernet MAC default initialization **************************************/ - macinit.Watchdog = ETH_WATCHDOG_ENABLE; - macinit.Jabber = ETH_JABBER_ENABLE; - macinit.InterFrameGap = ETH_INTERFRAMEGAP_96BIT; - macinit.CarrierSense = ETH_CARRIERSENCE_ENABLE; - macinit.ReceiveOwn = ETH_RECEIVEOWN_ENABLE; - macinit.LoopbackMode = ETH_LOOPBACKMODE_DISABLE; - if(heth->Init.ChecksumMode == ETH_CHECKSUM_BY_HARDWARE) - { - macinit.ChecksumOffload = ETH_CHECKSUMOFFLAOD_ENABLE; - } - else - { - macinit.ChecksumOffload = ETH_CHECKSUMOFFLAOD_DISABLE; - } - macinit.RetryTransmission = ETH_RETRYTRANSMISSION_DISABLE; - macinit.AutomaticPadCRCStrip = ETH_AUTOMATICPADCRCSTRIP_DISABLE; - macinit.BackOffLimit = ETH_BACKOFFLIMIT_10; - macinit.DeferralCheck = ETH_DEFFERRALCHECK_DISABLE; - macinit.ReceiveAll = ETH_RECEIVEAll_DISABLE; - macinit.SourceAddrFilter = ETH_SOURCEADDRFILTER_DISABLE; - macinit.PassControlFrames = ETH_PASSCONTROLFRAMES_BLOCKALL; - macinit.BroadcastFramesReception = ETH_BROADCASTFRAMESRECEPTION_ENABLE; - macinit.DestinationAddrFilter = ETH_DESTINATIONADDRFILTER_NORMAL; - macinit.PromiscuousMode = ETH_PROMISCUOUS_MODE_DISABLE; - macinit.MulticastFramesFilter = ETH_MULTICASTFRAMESFILTER_PERFECT; - macinit.UnicastFramesFilter = ETH_UNICASTFRAMESFILTER_PERFECT; - macinit.HashTableHigh = 0x0uL; - macinit.HashTableLow = 0x0uL; - macinit.PauseTime = 0x0uL; - macinit.ZeroQuantaPause = ETH_ZEROQUANTAPAUSE_DISABLE; - macinit.PauseLowThreshold = ETH_PAUSELOWTHRESHOLD_MINUS4; - macinit.UnicastPauseFrameDetect = ETH_UNICASTPAUSEFRAMEDETECT_DISABLE; - macinit.ReceiveFlowControl = ETH_RECEIVEFLOWCONTROL_DISABLE; - macinit.TransmitFlowControl = ETH_TRANSMITFLOWCONTROL_DISABLE; - macinit.VLANTagComparison = ETH_VLANTAGCOMPARISON_16BIT; - macinit.VLANTagIdentifier = 0x0uL; - - /*------------------------ ETHERNET MACCR Configuration --------------------*/ - /* Get the ETHERNET MACCR value */ - tmpreg = heth->Instance->MACCR; - /* Clear WD, PCE, PS, TE and RE bits */ - tmpreg &= ETH_MACCR_CLEAR_MASK; - /* Set the WD bit according to ETH Watchdog value */ - /* Set the JD: bit according to ETH Jabber value */ - /* Set the IFG bit according to ETH InterFrameGap value */ - /* Set the DCRS bit according to ETH CarrierSense value */ - /* Set the FES bit according to ETH Speed value */ - /* Set the DO bit according to ETH ReceiveOwn value */ - /* Set the LM bit according to ETH LoopbackMode value */ - /* Set the DM bit according to ETH Mode value */ - /* Set the IPCO bit according to ETH ChecksumOffload value */ - /* Set the DR bit according to ETH RetryTransmission value */ - /* Set the ACS bit according to ETH AutomaticPadCRCStrip value */ - /* Set the BL bit according to ETH BackOffLimit value */ - /* Set the DC bit according to ETH DeferralCheck value */ - tmpreg |= (uint32_t)(macinit.Watchdog | - macinit.Jabber | - macinit.InterFrameGap | - macinit.CarrierSense | - heth->Init.Speed | - macinit.ReceiveOwn | - macinit.LoopbackMode | - heth->Init.DuplexMode | - macinit.ChecksumOffload | - macinit.RetryTransmission | - macinit.AutomaticPadCRCStrip | - macinit.BackOffLimit | - macinit.DeferralCheck); - - /* Write to ETHERNET MACCR */ - prvWriteMACCR( heth, tmpreg ); - - /*----------------------- ETHERNET MACFFR Configuration --------------------*/ - /* Set the RA bit according to ETH ReceiveAll value */ - /* Set the SAF and SAIF bits according to ETH SourceAddrFilter value */ - /* Set the PCF bit according to ETH PassControlFrames value */ - /* Set the DBF bit according to ETH BroadcastFramesReception value */ - /* Set the DAIF bit according to ETH DestinationAddrFilter value */ - /* Set the PR bit according to ETH PromiscuousMode value */ - /* Set the PM, HMC and HPF bits according to ETH MulticastFramesFilter value */ - /* Set the HUC and HPF bits according to ETH UnicastFramesFilter value */ - /* Write to ETHERNET MACFFR */ - heth->Instance->MACFFR = (uint32_t)(macinit.ReceiveAll | - macinit.SourceAddrFilter | - macinit.PassControlFrames | - macinit.BroadcastFramesReception | - macinit.DestinationAddrFilter | - macinit.PromiscuousMode | - macinit.MulticastFramesFilter | - macinit.UnicastFramesFilter); - - /* Wait until the write operation will be taken into account: - at least four TX_CLK/RX_CLK clock cycles */ - tmpreg = heth->Instance->MACFFR; - vRegisterDelay(); - heth->Instance->MACFFR = tmpreg; - - /*--------------- ETHERNET MACHTHR and MACHTLR Configuration --------------*/ - /* Write to ETHERNET MACHTHR */ - heth->Instance->MACHTHR = (uint32_t)macinit.HashTableHigh; - - /* Write to ETHERNET MACHTLR */ - heth->Instance->MACHTLR = (uint32_t)macinit.HashTableLow; - /*----------------------- ETHERNET MACFCR Configuration -------------------*/ - - /* Get the ETHERNET MACFCR value */ - tmpreg = heth->Instance->MACFCR; - /* Clear xx bits */ - tmpreg &= ETH_MACFCR_CLEAR_MASK; - - /* Set the PT bit according to ETH PauseTime value */ - /* Set the DZPQ bit according to ETH ZeroQuantaPause value */ - /* Set the PLT bit according to ETH PauseLowThreshold value */ - /* Set the UP bit according to ETH UnicastPauseFrameDetect value */ - /* Set the RFE bit according to ETH ReceiveFlowControl value */ - /* Set the TFE bit according to ETH TransmitFlowControl value */ - tmpreg |= (uint32_t)((macinit.PauseTime << 16) | - macinit.ZeroQuantaPause | - macinit.PauseLowThreshold | - macinit.UnicastPauseFrameDetect | - macinit.ReceiveFlowControl | - macinit.TransmitFlowControl); - - /* Write to ETHERNET MACFCR */ - prvWriteMACFCR( heth, tmpreg ); - - /*----------------------- ETHERNET MACVLANTR Configuration ----------------*/ - /* Set the ETV bit according to ETH VLANTagComparison value */ - /* Set the VL bit according to ETH VLANTagIdentifier value */ - heth->Instance->MACVLANTR = (uint32_t)(macinit.VLANTagComparison | - macinit.VLANTagIdentifier); - - /* Wait until the write operation will be taken into account: - at least four TX_CLK/RX_CLK clock cycles */ - tmpreg = heth->Instance->MACVLANTR; - vRegisterDelay(); - heth->Instance->MACVLANTR = tmpreg; - - /* Ethernet DMA default initialization ************************************/ - dmainit.DropTCPIPChecksumErrorFrame = ETH_DROPTCPIPCHECKSUMERRORFRAME_ENABLE; - dmainit.ReceiveStoreForward = ETH_RECEIVESTOREFORWARD_ENABLE; - dmainit.FlushReceivedFrame = ETH_FLUSHRECEIVEDFRAME_ENABLE; - dmainit.TransmitStoreForward = ETH_TRANSMITSTOREFORWARD_ENABLE; - dmainit.TransmitThresholdControl = ETH_TRANSMITTHRESHOLDCONTROL_64BYTES; - dmainit.ForwardErrorFrames = ETH_FORWARDERRORFRAMES_DISABLE; - dmainit.ForwardUndersizedGoodFrames = ETH_FORWARDUNDERSIZEDGOODFRAMES_DISABLE; - dmainit.ReceiveThresholdControl = ETH_RECEIVEDTHRESHOLDCONTROL_64BYTES; - dmainit.SecondFrameOperate = ETH_SECONDFRAMEOPERARTE_ENABLE; - dmainit.AddressAlignedBeats = ETH_ADDRESSALIGNEDBEATS_ENABLE; - dmainit.FixedBurst = ETH_FIXEDBURST_ENABLE; - dmainit.RxDMABurstLength = ETH_RXDMABURSTLENGTH_32BEAT; - dmainit.TxDMABurstLength = ETH_TXDMABURSTLENGTH_32BEAT; - dmainit.EnhancedDescriptorFormat = ETH_DMAENHANCEDDESCRIPTOR_ENABLE; - dmainit.DescriptorSkipLength = 0x0uL; - dmainit.DMAArbitration = ETH_DMAARBITRATION_ROUNDROBIN_RXTX_1_1; - - /* Get the ETHERNET DMAOMR value */ - tmpreg = heth->Instance->DMAOMR; - /* Clear xx bits */ - tmpreg &= ETH_DMAOMR_CLEAR_MASK; - - /* Set the DT bit according to ETH DropTCPIPChecksumErrorFrame value */ - /* Set the RSF bit according to ETH ReceiveStoreForward value */ - /* Set the DFF bit according to ETH FlushReceivedFrame value */ - /* Set the TSF bit according to ETH TransmitStoreForward value */ - /* Set the TTC bit according to ETH TransmitThresholdControl value */ - /* Set the FEF bit according to ETH ForwardErrorFrames value */ - /* Set the FUF bit according to ETH ForwardUndersizedGoodFrames value */ - /* Set the RTC bit according to ETH ReceiveThresholdControl value */ - /* Set the OSF bit according to ETH SecondFrameOperate value */ - tmpreg |= (uint32_t)(dmainit.DropTCPIPChecksumErrorFrame | - dmainit.ReceiveStoreForward | - dmainit.FlushReceivedFrame | - dmainit.TransmitStoreForward | - dmainit.TransmitThresholdControl | - dmainit.ForwardErrorFrames | - dmainit.ForwardUndersizedGoodFrames | - dmainit.ReceiveThresholdControl | - dmainit.SecondFrameOperate); - - /* Write to ETHERNET DMAOMR */ - prvWriteDMAOMR( heth, tmpreg ); - - /*----------------------- ETHERNET DMABMR Configuration ------------------*/ - /* Set the AAL bit according to ETH AddressAlignedBeats value */ - /* Set the FB bit according to ETH FixedBurst value */ - /* Set the RPBL and 4*PBL bits according to ETH RxDMABurstLength value */ - /* Set the PBL and 4*PBL bits according to ETH TxDMABurstLength value */ - /* Set the Enhanced DMA descriptors bit according to ETH EnhancedDescriptorFormat value*/ - /* Set the DSL bit according to ETH DesciptorSkipLength value */ - /* Set the PR and DA bits according to ETH DMAArbitration value */ - heth->Instance->DMABMR = (uint32_t)(dmainit.AddressAlignedBeats | - dmainit.FixedBurst | - dmainit.RxDMABurstLength | /* !! if 4xPBL is selected for Tx or Rx it is applied for the other */ - dmainit.TxDMABurstLength | - dmainit.EnhancedDescriptorFormat | - (dmainit.DescriptorSkipLength << 2) | - dmainit.DMAArbitration | - ETH_DMABMR_USP); /* Enable use of separate PBL for Rx and Tx */ - - /* Wait until the write operation will be taken into account: - at least four TX_CLK/RX_CLK clock cycles */ - tmpreg = heth->Instance->DMABMR; - vRegisterDelay(); - heth->Instance->DMABMR = tmpreg; - - if(heth->Init.RxMode == ETH_RXINTERRUPT_MODE) - { - /* Enable the Ethernet Rx Interrupt */ - __HAL_ETH_DMA_ENABLE_IT(( heth ), ETH_DMA_IT_NIS | ETH_DMA_IT_R); - } - - /* Initialize MAC address in ethernet MAC */ - ETH_MACAddressConfig(heth, ETH_MAC_ADDRESS0, heth->Init.MACAddr); -} - -/** - * @brief Configures the selected MAC address. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @param MacAddr: The MAC address to configure - * This parameter can be one of the following values: - * @arg ETH_MAC_Address0: MAC Address0 - * @arg ETH_MAC_Address1: MAC Address1 - * @arg ETH_MAC_Address2: MAC Address2 - * @arg ETH_MAC_Address3: MAC Address3 - * @param Addr: Pointer to MAC address buffer data (6 bytes) - * @retval HAL status - */ -static void ETH_MACAddressConfig(ETH_HandleTypeDef *heth, uint32_t MacAddr, uint8_t *Addr) -{ - uint32_t tmpreg; - - ( void ) heth; - - /* Check the parameters */ - assert_param( IS_ETH_MAC_ADDRESS0123( MacAddr ) ); - - /* Calculate the selected MAC address high register */ - /* Register ETH_MACA0HR: Bit 31 MO: Always 1. */ - tmpreg = 0x80000000uL | ( ( uint32_t )Addr[ 5 ] << 8) | (uint32_t)Addr[ 4 ]; - /* Load the selected MAC address high register */ - ( * ( __IO uint32_t * ) ( ( uint32_t ) ( ETH_MAC_ADDR_HBASE + MacAddr ) ) ) = tmpreg; - /* Calculate the selected MAC address low register */ - tmpreg = ( ( uint32_t )Addr[ 3 ] << 24 ) | ( ( uint32_t )Addr[ 2 ] << 16 ) | ( ( uint32_t )Addr[ 1 ] << 8 ) | Addr[ 0 ]; - - /* Load the selected MAC address low register */ - ( * ( __IO uint32_t * ) ( ( uint32_t ) ( ETH_MAC_ADDR_LBASE + MacAddr ) ) ) = tmpreg; -} - -/** - * @brief Enables the MAC transmission. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval None - */ -static void ETH_MACTransmissionEnable(ETH_HandleTypeDef *heth) -{ - uint32_t tmpreg = heth->Instance->MACCR | ETH_MACCR_TE; - - prvWriteMACCR( heth, tmpreg ); -} - -/** - * @brief Disables the MAC transmission. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval None - */ -static void ETH_MACTransmissionDisable(ETH_HandleTypeDef *heth) -{ - uint32_t tmpreg = heth->Instance->MACCR & ~( ETH_MACCR_TE ); - - prvWriteMACCR( heth, tmpreg ); -} - -/** - * @brief Enables the MAC reception. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval None - */ -static void ETH_MACReceptionEnable(ETH_HandleTypeDef *heth) -{ - __IO uint32_t tmpreg = heth->Instance->MACCR | ETH_MACCR_RE; - - prvWriteMACCR( heth, tmpreg ); -} - -/** - * @brief Disables the MAC reception. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval None - */ -static void ETH_MACReceptionDisable(ETH_HandleTypeDef *heth) -{ - __IO uint32_t tmpreg = heth->Instance->MACCR & ~( ETH_MACCR_RE ); - - prvWriteMACCR( heth, tmpreg ); -} - -/** - * @brief Enables the DMA transmission. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval None - */ -static void ETH_DMATransmissionEnable(ETH_HandleTypeDef *heth) -{ - /* Enable the DMA transmission */ - __IO uint32_t tmpreg = heth->Instance->DMAOMR | ETH_DMAOMR_ST; - - prvWriteDMAOMR( heth, tmpreg ); -} - -/** - * @brief Disables the DMA transmission. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval None - */ -static void ETH_DMATransmissionDisable(ETH_HandleTypeDef *heth) -{ - /* Disable the DMA transmission */ - __IO uint32_t tmpreg = heth->Instance->DMAOMR & ~( ETH_DMAOMR_ST ); - - prvWriteDMAOMR( heth, tmpreg ); -} - -/** - * @brief Enables the DMA reception. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval None - */ -static void ETH_DMAReceptionEnable(ETH_HandleTypeDef *heth) -{ - /* Enable the DMA reception */ - __IO uint32_t tmpreg = heth->Instance->DMAOMR | ETH_DMAOMR_SR; - - prvWriteDMAOMR( heth, tmpreg ); -} - -/** - * @brief Disables the DMA reception. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval None - */ -static void ETH_DMAReceptionDisable(ETH_HandleTypeDef *heth) -{ - /* Disable the DMA reception */ - __IO uint32_t tmpreg = heth->Instance->DMAOMR & ~( ETH_DMAOMR_SR ); - - prvWriteDMAOMR( heth, tmpreg ); -} - -/** - * @brief Clears the ETHERNET transmit FIFO. - * @param heth: pointer to a ETH_HandleTypeDef structure that contains - * the configuration information for ETHERNET module - * @retval None - */ -static void ETH_FlushTransmitFIFO(ETH_HandleTypeDef *heth) -{ - /* Set the Flush Transmit FIFO bit */ - __IO uint32_t tmpreg = heth->Instance->DMAOMR | ETH_DMAOMR_FTF; - - prvWriteDMAOMR( heth, tmpreg ); -} - -/** - * @} - */ -#endif /* stm_is_F2 != 0 || stm_is_F4 != 0 || stm_is_F7 */ - -#endif /* HAL_ETH_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/