X-Git-Url: https://git.sur5r.net/?p=freertos;a=blobdiff_plain;f=FreeRTOS-Plus%2FSource%2FFreeRTOS-Plus-TCP%2Fportable%2FNetworkInterface%2Finclude%2FphyHandling.h;fp=FreeRTOS-Plus%2FSource%2FFreeRTOS-Plus-TCP%2Fportable%2FNetworkInterface%2Finclude%2FphyHandling.h;h=0000000000000000000000000000000000000000;hp=9e8a11387d474c8a05614a2dbd0dad3a68af7b5c;hb=b15dfacb6026af3b0ba697e5753844923b468d2b;hpb=4334233a064299a09d167a497889d3860932a587

diff --git a/FreeRTOS-Plus/Source/FreeRTOS-Plus-TCP/portable/NetworkInterface/include/phyHandling.h b/FreeRTOS-Plus/Source/FreeRTOS-Plus-TCP/portable/NetworkInterface/include/phyHandling.h
deleted file mode 100644
index 9e8a11387..000000000
--- a/FreeRTOS-Plus/Source/FreeRTOS-Plus-TCP/portable/NetworkInterface/include/phyHandling.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * Handling of Ethernet PHY's
- * PHY's communicate with an EMAC either through
- * a Media-Independent Interface (MII), or a Reduced Media-Independent Interface (RMII).
- * The EMAC can poll for PHY ports on 32 different addresses. Each of the PHY ports
- * shall be treated independently.
- * 
- */
-
-#ifndef PHYHANDLING_H
-
-#define PHYHANDLING_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-#ifndef ipconfigPHY_MAX_PORTS
-	/* There can be at most 32 PHY ports, but in most cases there are 4 or less. */
-	#define	ipconfigPHY_MAX_PORTS	4
-#endif
-
-/* A generic user-provided function that reads from the PHY-port at 'xAddress'( 0-based ). A 16-bit value shall be stored in
-  '*pulValue'. xRegister is the register number ( 0 .. 31 ). In fact all PHY registers are 16-bit.
-  Return non-zero in case the action failed. */
-typedef BaseType_t ( *xApplicationPhyReadHook_t )( BaseType_t xAddress, BaseType_t xRegister, uint32_t *pulValue );
-
-/* A generic user-provided function that writes 'ulValue' to the
-   PHY-port at 'xAddress' ( 0-based ). xRegister is the register number ( 0 .. 31 ).
-   Return non-zero in case the action failed. */
-typedef BaseType_t ( *xApplicationPhyWriteHook_t )( BaseType_t xAddress, BaseType_t xRegister, uint32_t ulValue );
-
-typedef struct xPhyProperties
-{
-	uint8_t ucSpeed;
-	uint8_t ucMDI_X;		/* MDI-X : Medium Dependent Interface - Crossover */
-	uint8_t ucDuplex;
-	uint8_t ucSpare;
-} PhyProperties_t;
-
-typedef struct xEthernetPhy
-{
-	xApplicationPhyReadHook_t fnPhyRead;
-	xApplicationPhyWriteHook_t fnPhyWrite;
-	uint32_t ulPhyIDs[ ipconfigPHY_MAX_PORTS ];
-	uint8_t ucPhyIndexes[ ipconfigPHY_MAX_PORTS ];
-	TimeOut_t xLinkStatusTimer;
-	TickType_t xLinkStatusRemaining;
-	BaseType_t xPortCount;
-	uint32_t ulBCRValue;
-	uint32_t ulACRValue;
-	uint32_t ulLinkStatusMask;
-	PhyProperties_t xPhyPreferences;
-	PhyProperties_t xPhyProperties;
-} EthernetPhy_t;
-
-/* Some defines used internally here to indicate preferences about speed, MDIX
-(wired direct or crossed), and duplex (half or full). */
-
-/* Values for PhyProperties_t::ucSpeed : */
-#define	PHY_SPEED_10		1
-#define	PHY_SPEED_100		2
-#define	PHY_SPEED_AUTO		3
-
-/* Values for PhyProperties_t::ucMDI_X : */
-#define	PHY_MDIX_DIRECT		1
-#define	PHY_MDIX_CROSSED	2
-#define	PHY_MDIX_AUTO		3
-
-/* Values for PhyProperties_t::ucDuplex : */
-#define	PHY_DUPLEX_HALF		1
-#define	PHY_DUPLEX_FULL		2
-#define	PHY_DUPLEX_AUTO		3
-
-/* ID's of supported PHY's : */
-#define PHY_ID_LAN8742A		0x0007c130
-#define PHY_ID_LAN8720		0x0007c0f0
-
-#define PHY_ID_KSZ8041		0x000010A1
-#define PHY_ID_KSZ8051		0x000010A1
-#define PHY_ID_KSZ8081		0x000010A1
-
-#define PHY_ID_KSZ8863		0x00221430
-#define PHY_ID_KSZ8081MNXIA 0x00221560
-
-#define PHY_ID_DP83848I		0x20005C90
-
-
-/* Initialise the struct and assign a PHY-read and -write function. */
-void vPhyInitialise( EthernetPhy_t *pxPhyObject, xApplicationPhyReadHook_t fnPhyRead, xApplicationPhyWriteHook_t fnPhyWrite );
-
-/* Discover all PHY's connected by polling 32 indexes ( zero-based ) */
-BaseType_t xPhyDiscover( EthernetPhy_t *pxPhyObject );
-
-/* Send a reset command to the connected PHY ports and send configuration. */
-BaseType_t xPhyConfigure( EthernetPhy_t *pxPhyObject, const PhyProperties_t *pxPhyProperties );
-
-/* Give a command to start auto negotiation on a set of PHY port's. */
-BaseType_t xPhyStartAutoNegotiation( EthernetPhy_t *pxPhyObject, uint32_t ulPhyMask );
-
-/* Do not use auto negotiation but use predefined values from 'pxPhyObject->xPhyPreferences'. */
-BaseType_t xPhyFixedValue( EthernetPhy_t *pxPhyObject, uint32_t ulPhyMask );
-
-/* Check the current Link Status.
-'xHadReception' : make this true if a packet has been received since the
-last call to this function. */
-BaseType_t xPhyCheckLinkStatus( EthernetPhy_t *pxPhyObject, BaseType_t xHadReception );
-
-/* Get the bitmask of a given 'EthernetPhy_t'. */
-#define xPhyGetMask( pxPhyObject ) \
-	( ( ( ( uint32_t ) 1u ) << ( pxPhyObject )->xPortCount ) - 1u )
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif