X-Git-Url: https://git.sur5r.net/?p=freertos;a=blobdiff_plain;f=FreeRTOS%2FDemo%2FRX600_RX63N-RSK_Renesas%2FRTOSDemo%2FRenesas-Files%2Fboard%2Frskrx63n%2Flowsrc.c;fp=FreeRTOS%2FDemo%2FRX600_RX63N-RSK_Renesas%2FRTOSDemo%2FRenesas-Files%2Fboard%2Frskrx63n%2Flowsrc.c;h=0000000000000000000000000000000000000000;hp=ad9f32ce45ee76266590fd725d108788f533e8fe;hb=b15dfacb6026af3b0ba697e5753844923b468d2b;hpb=4334233a064299a09d167a497889d3860932a587 diff --git a/FreeRTOS/Demo/RX600_RX63N-RSK_Renesas/RTOSDemo/Renesas-Files/board/rskrx63n/lowsrc.c b/FreeRTOS/Demo/RX600_RX63N-RSK_Renesas/RTOSDemo/Renesas-Files/board/rskrx63n/lowsrc.c deleted file mode 100644 index ad9f32ce4..000000000 --- a/FreeRTOS/Demo/RX600_RX63N-RSK_Renesas/RTOSDemo/Renesas-Files/board/rskrx63n/lowsrc.c +++ /dev/null @@ -1,332 +0,0 @@ -/*********************************************************************************************************************** -* DISCLAIMER -* This software is supplied by Renesas Electronics Corporation and is only intended for use with Renesas products. No -* other uses are authorized. This software is owned by Renesas Electronics Corporation and is protected under all -* applicable laws, including copyright laws. -* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING -* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, -* FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED. TO THE MAXIMUM -* EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES -* SHALL BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR ANY REASON RELATED TO THIS -* SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. -* Renesas reserves the right, without notice, to make changes to this software and to discontinue the availability of -* this software. By using this software, you agree to the additional terms and conditions found by accessing the -* following link: -* http://www.renesas.com/disclaimer -* -* Copyright (C) 2012 Renesas Electronics Corporation. All rights reserved. -***********************************************************************************************************************/ -/*********************************************************************************************************************** -* File Name : lowsrc.c -* Description : Functions to support stream I/O -***********************************************************************************************************************/ -/*********************************************************************************************************************** -* History : DD.MM.YYYY Version Description -* : 26.10.2011 1.00 First Release -***********************************************************************************************************************/ -/*********************************************************************************************************************** -Includes , "Project Includes" -***********************************************************************************************************************/ -#include -#include -#include - -/*********************************************************************************************************************** -Macro definitions -***********************************************************************************************************************/ -/*Number of I/O Stream*/ -#define IOSTREAM 20 - -/* file number */ -#define STDIN 0 /* Standard input (console) */ -#define STDOUT 1 /* Standard output (console) */ -#define STDERR 2 /* Standard error output (console) */ - -#define FLMIN 0 /* Minimum file number */ -#define _MOPENR 0x1 -#define _MOPENW 0x2 -#define _MOPENA 0x4 -#define _MTRUNC 0x8 -#define _MCREAT 0x10 -#define _MBIN 0x20 -#define _MEXCL 0x40 -#define _MALBUF 0x40 -#define _MALFIL 0x80 -#define _MEOF 0x100 -#define _MERR 0x200 -#define _MLBF 0x400 -#define _MNBF 0x800 -#define _MREAD 0x1000 -#define _MWRITE 0x2000 -#define _MBYTE 0x4000 -#define _MWIDE 0x8000 -/* File Flags */ -#define O_RDONLY 0x0001 /* Read only */ -#define O_WRONLY 0x0002 /* Write only */ -#define O_RDWR 0x0004 /* Both read and Write */ -#define O_CREAT 0x0008 /* A file is created if it is not existed */ -#define O_TRUNC 0x0010 /* The file size is changed to 0 if it is existed. */ -#define O_APPEND 0x0020 /* The position is set for next reading/writing */ - /* 0: Top of the file 1: End of file */ - -/* Special character code */ -#define CR 0x0d /* Carriage return */ -#define LF 0x0a /* Line feed */ - -#if defined( __RX ) -const long _nfiles = IOSTREAM; /* The number of files for input/output files */ -#else -const int _nfiles = IOSTREAM; /* The number of files for input/output files */ -#endif -char flmod[IOSTREAM]; /* The location for the mode of opened file. */ - -unsigned char sml_buf[IOSTREAM]; - -#define FPATH_STDIN "C:\\stdin" -#define FPATH_STDOUT "C:\\stdout" -#define FPATH_STDERR "C:\\stderr" - -/* H8 Normal mode ,SH and RX */ -#if defined( __2000N__ ) || defined( __2600N__ ) || defined( __300HN__ ) || defined( _SH ) -/* Output one character to standard output */ -extern void charput(char); -/* Input one character from standard input */ -extern char charget(void); -/* Output one character to the file */ -extern char fcharput(char, unsigned char); -/* Input one character from the file */ -extern char fcharget(char*, unsigned char); -/* Open the file */ -extern char fileopen(char*, unsigned char, unsigned char*); -/* Close the file */ -extern char fileclose(unsigned char); -/* Move the file offset */ -extern char fpseek(unsigned char, long, unsigned char); -/* Get the file offset */ -extern char fptell(unsigned char, long*); - -/* RX */ -#elif defined( __RX ) -/* Output one character to standard output */ -extern void charput(unsigned char); -/* Input one character from standard input */ -extern unsigned char charget(void); - -/* H8 Advanced mode */ -#elif defined( __2000A__ ) || defined( __2600A__ ) || defined( __300HA__ ) || defined( __H8SXN__ ) || defined( __H8SXA__ ) || defined( __H8SXM__ ) || defined( __H8SXX__ ) -/* Output one character to standard output */ -extern void charput(char); -/* Input one character from standard input */ -extern char charget(void); -/* Output one character to the file */ -extern char fcharput(char, unsigned char); -/* Input one character from the file */ -extern char fcharget(char*, unsigned char); -/* Open the file */ -/* Specified as the number of register which stored paramter is 3 */ -extern char __regparam3 fileopen(char*, unsigned char, unsigned char*); -/* Close the file */ -extern char fileclose(unsigned char); -/* Move the file offset */ -extern char fpseek(unsigned char, long, unsigned char); -/* Get the file offset */ -extern char fptell(unsigned char, long*); - -/* H8300 and H8300L */ -#elif defined( __300__ ) || defined( __300L__ ) -/* Output one character to standard output */ -extern void charput(char); -/* Input one character from standard input */ -extern char charget(void); -/* Output one character to the file */ -extern char fcharput(char, unsigned char); -/* Input one character from the file */ -extern char fcharget(char*, unsigned char); -/* Open the file */ -/* Specified as the number of register which stored paramter is 3 */ -extern char __regparam3 fileopen(char*, unsigned char, unsigned char*); -/* Close the file */ -extern char fileclose(unsigned char); -/* Move the file offset */ -/* Move the file offset */ -extern char __regparam3 fpseek(unsigned char, long, unsigned char); -/* Get the file offset */ -extern char fptell(unsigned char, long*); -#endif - -#include -FILE *_Files[IOSTREAM]; // structure for FILE -char *env_list[] = { // Array for environment variables(**environ) - "ENV1=temp01", - "ENV2=temp02", - "ENV9=end", - '\0' // Terminal for environment variables -}; - -char **environ = env_list; - -/****************************************************************************/ -/* _INIT_IOLIB */ -/* Initialize C library Functions, if necessary. */ -/* Define USES_SIMIO on Assembler Option. */ -/****************************************************************************/ -void _INIT_IOLIB( void ) -{ - /* A file for standard input/output is opened or created. Each FILE */ - /* structure members are initialized by the library. Each _Buf member */ - /* in it is re-set the end of buffer pointer. */ - - /* Standard Input File */ - if( freopen( FPATH_STDIN, "r", stdin ) == NULL ) - stdin->_Mode = 0xffff; /* Not allow the access if it fails to open */ - stdin->_Mode = _MOPENR; /* Read only attribute */ - stdin->_Mode |= _MNBF; /* Non-buffering for data */ - stdin->_Bend = stdin->_Buf + 1; /* Re-set pointer to the end of buffer */ - - /* Standard Output File */ - if( freopen( FPATH_STDOUT, "w", stdout ) == NULL ) - stdout->_Mode = 0xffff; /* Not allow the access if it fails to open */ - stdout->_Mode |= _MNBF; /* Non-buffering for data */ - stdout->_Bend = stdout->_Buf + 1;/* Re-set pointer to the end of buffer */ - - /* Standard Error File */ - if( freopen( FPATH_STDERR, "w", stderr ) == NULL ) - stderr->_Mode = 0xffff; /* Not allow the access if it fails to open */ - stderr->_Mode |= _MNBF; /* Non-buffering for data */ - stderr->_Bend = stderr->_Buf + 1;/* Re-set pointer to the end of buffer */ -} - -/****************************************************************************/ -/* _CLOSEALL */ -/****************************************************************************/ -void _CLOSEALL( void ) -{ - long i; - - for( i=0; i < _nfiles; i++ ) - { - /* Checks if the file is opened or not */ - if( _Files[i]->_Mode & (_MOPENR | _MOPENW | _MOPENA ) ) - fclose( _Files[i] ); /* Closes the file */ - } -} - -/**************************************************************************/ -/* open:file open */ -/* Return value:File number (Pass) */ -/* -1 (Failure) */ -/**************************************************************************/ -#if defined( __RX ) -long open(const char *name, /* File name */ - long mode, /* Open mode */ - long flg) /* Open flag */ -#else -int open(char *name, /* File name */ - int mode, /* Open mode */ - int flg) /* Open flag */ -#endif -{ - - - if( strcmp( name, FPATH_STDIN ) == 0 ) /* Standard Input file? */ - { - if( ( mode & O_RDONLY ) == 0 ) return -1; - flmod[STDIN] = mode; - return STDIN; - } - else if( strcmp( name, FPATH_STDOUT ) == 0 )/* Standard Output file? */ - { - if( ( mode & O_WRONLY ) == 0 ) return -1; - flmod[STDOUT] = mode; - return STDOUT; - } - else if(strcmp(name, FPATH_STDERR ) == 0 ) /* Standard Error file? */ - { - if( ( mode & O_WRONLY ) == 0 ) return -1; - flmod[STDERR] = mode; - return STDERR; - } - else return -1; /*Others */ -} - -#if defined( __RX ) -long close( long fileno ) -#else -int close( int fileno ) -#endif -{ - return 1; -} - -/**************************************************************************/ -/* write:Data write */ -/* Return value:Number of write characters (Pass) */ -/* -1 (Failure) */ -/**************************************************************************/ -#if defined( __RX ) -long write(long fileno, /* File number */ - const unsigned char *buf, /* The address of destination buffer */ - long count) /* The number of chacter to write */ -#else -int write(int fileno, /* File number */ - char *buf, /* The address of destination buffer */ - int count) /* The number of chacter to write */ -#endif -{ - long i; /* A variable for counter */ - unsigned char c; /* An output character */ - - /* Checking the mode of file , output each character */ - /* Checking the attribute for Write-Only, Read-Only or Read-Write */ - if(flmod[fileno]&O_WRONLY || flmod[fileno]&O_RDWR) - { - if( fileno == STDIN ) return -1; /* Standard Input */ - else if( (fileno == STDOUT) || (fileno == STDERR) ) - /* Standard Error/output */ - { - for( i = count; i > 0; --i ) - { - c = *buf++; - charput(c); - } - return count; /*Return the number of written characters */ - } - else return -1; /* Incorrect file number */ - } - else return -1; /* An error */ -} - -#if defined( __RX ) -long read( long fileno, unsigned char *buf, long count ) -#else -int read( int fileno, char *buf, unsigned int count ) -#endif -{ - long i; - - /* Checking the file mode with the file number, each character is input and stored the buffer */ - - if((flmod[fileno]&_MOPENR) || (flmod[fileno]&O_RDWR)){ - for(i = count; i > 0; i--){ - *buf = charget(); - if(*buf==CR){ /* Replace the new line character */ - *buf = LF; - } - buf++; - } - return count; - } - else { - return -1; - } -} - -#if defined( __RX ) -long lseek( long fileno, long offset, long base ) -#else -long lseek( int fileno, long offset, int base ) -#endif -{ - return -1L; -} -