From: gaurav-aws Date: Thu, 23 Jan 2020 01:50:25 +0000 (+0000) Subject: Updates to CM3_MPU GCC port X-Git-Tag: V10.3.0~17 X-Git-Url: https://git.sur5r.net/?p=freertos;a=commitdiff_plain;h=bc49773725746646bf289ff53f09891d675a5c4e Updates to CM3_MPU GCC port - System calls are now only allowed from kernel code. This change can be turned on or off using configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY. - MPU is disabled before reprogramming it and enabled afterwards to be compliant with ARM recommendations. git-svn-id: https://svn.code.sf.net/p/freertos/code/trunk@2806 1d2547de-c912-0410-9cb9-b8ca96c0e9e2 --- diff --git a/FreeRTOS/Source/portable/GCC/ARM_CM3_MPU/port.c b/FreeRTOS/Source/portable/GCC/ARM_CM3_MPU/port.c index 25eb4130e..312500950 100644 --- a/FreeRTOS/Source/portable/GCC/ARM_CM3_MPU/port.c +++ b/FreeRTOS/Source/portable/GCC/ARM_CM3_MPU/port.c @@ -30,8 +30,8 @@ *----------------------------------------------------------*/ /* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining -all the API functions to use the MPU wrappers. That should only be done when -task.h is included from an application file. */ + * all the API functions to use the MPU wrappers. That should only be done when + * task.h is included from an application file. */ #define MPU_WRAPPERS_INCLUDED_FROM_API_FILE /* Scheduler includes. */ @@ -46,7 +46,7 @@ task.h is included from an application file. */ #define portNVIC_SYSTICK_CLK ( 1UL << 2UL ) #else /* The way the SysTick is clocked is not modified in case it is not the same - as the core. */ + * as the core. */ #define portNVIC_SYSTICK_CLK ( 0 ) #endif @@ -86,21 +86,22 @@ task.h is included from an application file. */ #define portINITIAL_CONTROL_IF_PRIVILEGED ( 0x02 ) /* Constants required to check the validity of an interrupt priority. */ -#define portFIRST_USER_INTERRUPT_NUMBER ( 16 ) -#define portNVIC_IP_REGISTERS_OFFSET_16 ( 0xE000E3F0 ) -#define portAIRCR_REG ( * ( ( volatile uint32_t * ) 0xE000ED0C ) ) -#define portMAX_8_BIT_VALUE ( ( uint8_t ) 0xff ) -#define portTOP_BIT_OF_BYTE ( ( uint8_t ) 0x80 ) -#define portMAX_PRIGROUP_BITS ( ( uint8_t ) 7 ) -#define portPRIORITY_GROUP_MASK ( 0x07UL << 8UL ) -#define portPRIGROUP_SHIFT ( 8UL ) +#define portFIRST_USER_INTERRUPT_NUMBER ( 16 ) +#define portNVIC_IP_REGISTERS_OFFSET_16 ( 0xE000E3F0 ) +#define portAIRCR_REG ( * ( ( volatile uint32_t * ) 0xE000ED0C ) ) +#define portMAX_8_BIT_VALUE ( ( uint8_t ) 0xff ) +#define portTOP_BIT_OF_BYTE ( ( uint8_t ) 0x80 ) +#define portMAX_PRIGROUP_BITS ( ( uint8_t ) 7 ) +#define portPRIORITY_GROUP_MASK ( 0x07UL << 8UL ) +#define portPRIGROUP_SHIFT ( 8UL ) /* Offsets in the stack to the parameters when inside the SVC handler. */ #define portOFFSET_TO_PC ( 6 ) /* For strict compliance with the Cortex-M spec the task start address should -have bit-0 clear, as it is loaded into the PC on exit from an ISR. */ -#define portSTART_ADDRESS_MASK ( ( StackType_t ) 0xfffffffeUL ) + * have bit-0 clear, as it is loaded into the PC on exit from an ISR. */ +#define portSTART_ADDRESS_MASK ( ( StackType_t ) 0xfffffffeUL ) +/*-----------------------------------------------------------*/ /* * Configure a number of standard MPU regions that are used by all tasks. @@ -171,8 +172,8 @@ extern void vPortResetPrivilege( BaseType_t xRunningPrivileged ); /*-----------------------------------------------------------*/ /* Each task maintains its own interrupt status in the critical nesting -variable. Note this is not saved as part of the task context as context -switches can only occur when uxCriticalNesting is zero. */ + * variable. Note this is not saved as part of the task context as context + * switches can only occur when uxCriticalNesting is zero. */ static UBaseType_t uxCriticalNesting = 0xaaaaaaaa; /* @@ -185,7 +186,6 @@ static UBaseType_t uxCriticalNesting = 0xaaaaaaaa; static uint32_t ulMaxPRIGROUPValue = 0; static const volatile uint8_t * const pcInterruptPriorityRegisters = ( const volatile uint8_t * const ) portNVIC_IP_REGISTERS_OFFSET_16; #endif /* configASSERT_DEFINED */ - /*-----------------------------------------------------------*/ /* @@ -194,7 +194,7 @@ static UBaseType_t uxCriticalNesting = 0xaaaaaaaa; StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters, BaseType_t xRunPrivileged ) { /* Simulate the stack frame as it would be created by a context switch - interrupt. */ + * interrupt. */ pxTopOfStack--; /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */ *pxTopOfStack = portINITIAL_XPSR; /* xPSR */ pxTopOfStack--; @@ -240,10 +240,25 @@ void vPortSVCHandler( void ) static void prvSVCHandler( uint32_t *pulParam ) { uint8_t ucSVCNumber; +uint32_t ulPC; +#if( configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY == 1 ) + #if defined( __ARMCC_VERSION ) + /* Declaration when these variable are defined in code instead of being + * exported from linker scripts. */ + extern uint32_t * __syscalls_flash_start__; + extern uint32_t * __syscalls_flash_end__; + #else + /* Declaration when these variable are exported from linker scripts. */ + extern uint32_t __syscalls_flash_start__[]; + extern uint32_t __syscalls_flash_end__[]; + #endif /* #if defined( __ARMCC_VERSION ) */ +#endif /* #if( configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY == 1 ) */ + + /* The stack contains: r0, r1, r2, r3, r12, LR, PC and xPSR. The first + * argument (r0) is pulParam[ 0 ]. */ + ulPC = pulParam[ portOFFSET_TO_PC ]; + ucSVCNumber = ( ( uint8_t * ) ulPC )[ -2 ]; - /* The stack contains: r0, r1, r2, r3, r12, r14, the return address and - xPSR. The first argument (r0) is pulParam[ 0 ]. */ - ucSVCNumber = ( ( uint8_t * ) pulParam[ portOFFSET_TO_PC ] )[ -2 ]; switch( ucSVCNumber ) { case portSVC_START_SCHEDULER : portNVIC_SYSPRI1_REG |= portNVIC_SVC_PRI; @@ -252,14 +267,32 @@ uint8_t ucSVCNumber; case portSVC_YIELD : portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; /* Barriers are normally not required - but do ensure the code is completely - within the specified behaviour for the - architecture. */ + * but do ensure the code is completely + * within the specified behaviour for the + * architecture. */ __asm volatile( "dsb" ::: "memory" ); __asm volatile( "isb" ); break; + + #if( configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY == 1 ) + case portSVC_RAISE_PRIVILEGE : /* Only raise the privilege, if the + * svc was raised from any of the + * system calls. */ + if( ulPC >= ( uint32_t ) __syscalls_flash_start__ && + ulPC <= ( uint32_t ) __syscalls_flash_end__ ) + { + __asm volatile + ( + " mrs r1, control \n" /* Obtain current control value. */ + " bic r1, #1 \n" /* Set privilege bit. */ + " msr control, r1 \n" /* Write back new control value. */ + ::: "r1", "memory" + ); + } + break; + #else case portSVC_RAISE_PRIVILEGE : __asm volatile ( " mrs r1, control \n" /* Obtain current control value. */ @@ -268,6 +301,7 @@ uint8_t ucSVCNumber; ::: "r1", "memory" ); break; + #endif /* #if( configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY == 1 ) */ default : /* Unknown SVC call. */ break; @@ -287,9 +321,23 @@ static void prvRestoreContextOfFirstTask( void ) " ldr r1, [r3] \n" " ldr r0, [r1] \n" /* The first item in the TCB is the task top of stack. */ " add r1, r1, #4 \n" /* Move onto the second item in the TCB... */ + " \n" + " dmb \n" /* Complete outstanding transfers before disabling MPU. */ + " ldr r2, =0xe000ed94 \n" /* MPU_CTRL register. */ + " ldr r3, [r2] \n" /* Read the value of MPU_CTRL. */ + " bic r3, #1 \n" /* r3 = r3 & ~1 i.e. Clear the bit 0 in r3. */ + " str r3, [r2] \n" /* Disable MPU. */ + " \n" " ldr r2, =0xe000ed9c \n" /* Region Base Address register. */ " ldmia r1!, {r4-r11} \n" /* Read 4 sets of MPU registers. */ " stmia r2!, {r4-r11} \n" /* Write 4 sets of MPU registers. */ + " \n" + " ldr r2, =0xe000ed94 \n" /* MPU_CTRL register. */ + " ldr r3, [r2] \n" /* Read the value of MPU_CTRL. */ + " orr r3, #1 \n" /* r3 = r3 | 1 i.e. Set the bit 0 in r3. */ + " str r3, [r2] \n" /* Enable MPU. */ + " dsb \n" /* Force memory writes before continuing. */ + " \n" " ldmia r0!, {r3, r4-r11} \n" /* Pop the registers that are not automatically saved on exception entry. */ " msr control, r3 \n" " msr psp, r0 \n" /* Restore the task stack pointer. */ @@ -310,7 +358,7 @@ static void prvRestoreContextOfFirstTask( void ) BaseType_t xPortStartScheduler( void ) { /* configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to 0. See - http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html */ + * http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html */ configASSERT( ( configMAX_SYSCALL_INTERRUPT_PRIORITY ) ); #if( configASSERT_DEFINED == 1 ) @@ -320,15 +368,15 @@ BaseType_t xPortStartScheduler( void ) volatile uint8_t ucMaxPriorityValue; /* Determine the maximum priority from which ISR safe FreeRTOS API - functions can be called. ISR safe functions are those that end in - "FromISR". FreeRTOS maintains separate thread and ISR API functions to - ensure interrupt entry is as fast and simple as possible. + * functions can be called. ISR safe functions are those that end in + * "FromISR". FreeRTOS maintains separate thread and ISR API functions + * to ensure interrupt entry is as fast and simple as possible. - Save the interrupt priority value that is about to be clobbered. */ + * Save the interrupt priority value that is about to be clobbered. */ ulOriginalPriority = *pucFirstUserPriorityRegister; /* Determine the number of priority bits available. First write to all - possible bits. */ + * possible bits. */ *pucFirstUserPriorityRegister = portMAX_8_BIT_VALUE; /* Read the value back to see how many bits stuck. */ @@ -338,7 +386,7 @@ BaseType_t xPortStartScheduler( void ) ucMaxSysCallPriority = configMAX_SYSCALL_INTERRUPT_PRIORITY & ucMaxPriorityValue; /* Calculate the maximum acceptable priority group value for the number - of bits read back. */ + * of bits read back. */ ulMaxPRIGROUPValue = portMAX_PRIGROUP_BITS; while( ( ucMaxPriorityValue & portTOP_BIT_OF_BYTE ) == portTOP_BIT_OF_BYTE ) { @@ -349,8 +397,8 @@ BaseType_t xPortStartScheduler( void ) #ifdef __NVIC_PRIO_BITS { /* Check the CMSIS configuration that defines the number of - priority bits matches the number of priority bits actually queried - from the hardware. */ + * priority bits matches the number of priority bits actually queried + * from the hardware. */ configASSERT( ( portMAX_PRIGROUP_BITS - ulMaxPRIGROUPValue ) == __NVIC_PRIO_BITS ); } #endif @@ -358,26 +406,26 @@ BaseType_t xPortStartScheduler( void ) #ifdef configPRIO_BITS { /* Check the FreeRTOS configuration that defines the number of - priority bits matches the number of priority bits actually queried - from the hardware. */ + * priority bits matches the number of priority bits actually queried + * from the hardware. */ configASSERT( ( portMAX_PRIGROUP_BITS - ulMaxPRIGROUPValue ) == configPRIO_BITS ); } #endif /* Shift the priority group value back to its position within the AIRCR - register. */ + * register. */ ulMaxPRIGROUPValue <<= portPRIGROUP_SHIFT; ulMaxPRIGROUPValue &= portPRIORITY_GROUP_MASK; /* Restore the clobbered interrupt priority register to its original - value. */ + * value. */ *pucFirstUserPriorityRegister = ulOriginalPriority; } #endif /* conifgASSERT_DEFINED */ /* Make PendSV and SysTick the same priority as the kernel, and the SVC - handler higher priority so it can be used to exit a critical section (where - lower priorities are masked). */ + * handler higher priority so it can be used to exit a critical section (where + * lower priorities are masked). */ portNVIC_SYSPRI2_REG |= portNVIC_PENDSV_PRI; portNVIC_SYSPRI2_REG |= portNVIC_SYSTICK_PRI; @@ -385,7 +433,7 @@ BaseType_t xPortStartScheduler( void ) prvSetupMPU(); /* Start the timer that generates the tick ISR. Interrupts are disabled - here already. */ + * here already. */ vPortSetupTimerInterrupt(); /* Initialise the critical nesting count ready for the first task. */ @@ -413,7 +461,7 @@ BaseType_t xPortStartScheduler( void ) void vPortEndScheduler( void ) { /* Not implemented in ports where there is nothing to return to. - Artificially force an assert. */ + * Artificially force an assert. */ configASSERT( uxCriticalNesting == 1000UL ); } /*-----------------------------------------------------------*/ @@ -471,9 +519,23 @@ void xPortPendSVHandler( void ) " ldr r1, [r3] \n" " ldr r0, [r1] \n" /* The first item in the TCB is the task top of stack. */ " add r1, r1, #4 \n" /* Move onto the second item in the TCB... */ + " \n" + " dmb \n" /* Complete outstanding transfers before disabling MPU. */ + " ldr r2, =0xe000ed94 \n" /* MPU_CTRL register. */ + " ldr r3, [r2] \n" /* Read the value of MPU_CTRL. */ + " bic r3, #1 \n" /* r3 = r3 & ~1 i.e. Clear the bit 0 in r3. */ + " str r3, [r2] \n" /* Disable MPU. */ + " \n" " ldr r2, =0xe000ed9c \n" /* Region Base Address register. */ " ldmia r1!, {r4-r11} \n" /* Read 4 sets of MPU registers. */ " stmia r2!, {r4-r11} \n" /* Write 4 sets of MPU registers. */ + " \n" + " ldr r2, =0xe000ed94 \n" /* MPU_CTRL register. */ + " ldr r3, [r2] \n" /* Read the value of MPU_CTRL. */ + " orr r3, #1 \n" /* r3 = r3 | 1 i.e. Set the bit 0 in r3. */ + " str r3, [r2] \n" /* Enable MPU. */ + " dsb \n" /* Force memory writes before continuing. */ + " \n" " ldmia r0!, {r3, r4-r11} \n" /* Pop the registers that are not automatically saved on exception entry. */ " msr control, r3 \n" " \n" @@ -542,8 +604,8 @@ extern uint32_t __privileged_data_end__[]; ( portMPU_REGION_ENABLE ); /* Setup the first 16K for privileged only access (even though less - than 10K is actually being used). This is where the kernel code is - placed. */ + * than 10K is actually being used). This is where the kernel code is + * placed. */ portMPU_REGION_BASE_ADDRESS_REG = ( ( uint32_t ) __FLASH_segment_start__ ) | /* Base address. */ ( portMPU_REGION_VALID ) | ( portPRIVILEGED_FLASH_REGION ); @@ -554,7 +616,7 @@ extern uint32_t __privileged_data_end__[]; ( portMPU_REGION_ENABLE ); /* Setup the privileged data RAM region. This is where the kernel data - is placed. */ + * is placed. */ portMPU_REGION_BASE_ADDRESS_REG = ( ( uint32_t ) __privileged_data_start__ ) | /* Base address. */ ( portMPU_REGION_VALID ) | ( portPRIVILEGED_RAM_REGION ); @@ -565,7 +627,7 @@ extern uint32_t __privileged_data_end__[]; ( portMPU_REGION_ENABLE ); /* By default allow everything to access the general peripherals. The - system peripherals and registers are protected. */ + * system peripherals and registers are protected. */ portMPU_REGION_BASE_ADDRESS_REG = ( portPERIPHERALS_START_ADDRESS ) | ( portMPU_REGION_VALID ) | ( portGENERAL_PERIPHERALS_REGION ); @@ -588,7 +650,7 @@ static uint32_t prvGetMPURegionSizeSetting( uint32_t ulActualSizeInBytes ) uint32_t ulRegionSize, ulReturnValue = 4; /* 32 is the smallest region size, 31 is the largest valid value for - ulReturnValue. */ + * ulReturnValue. */ for( ulRegionSize = 32UL; ulReturnValue < 31UL; ( ulRegionSize <<= 1UL ) ) { if( ulActualSizeInBytes <= ulRegionSize ) @@ -602,7 +664,7 @@ uint32_t ulRegionSize, ulReturnValue = 4; } /* Shift the code by one before returning so it can be written directly - into the the correct bit position of the attribute register. */ + * into the the correct bit position of the attribute register. */ return ( ulReturnValue << 1UL ); } /*-----------------------------------------------------------*/ @@ -661,7 +723,7 @@ uint32_t ul; ( portMPU_REGION_ENABLE ); /* Re-instate the privileged only RAM region as xRegion[ 0 ] will have - just removed the privileged only parameters. */ + * just removed the privileged only parameters. */ xMPUSettings->xRegion[ 1 ].ulRegionBaseAddress = ( ( uint32_t ) __privileged_data_start__ ) | /* Base address. */ ( portMPU_REGION_VALID ) | @@ -683,9 +745,9 @@ uint32_t ul; else { /* This function is called automatically when the task is created - in - which case the stack region parameters will be valid. At all other - times the stack parameters will not be valid and it is assumed that the - stack region has already been configured. */ + * which case the stack region parameters will be valid. At all other + * times the stack parameters will not be valid and it is assumed that the + * stack region has already been configured. */ if( ulStackDepth > 0 ) { /* Define the region that allows access to the stack. */ @@ -708,8 +770,8 @@ uint32_t ul; if( ( xRegions[ lIndex ] ).ulLengthInBytes > 0UL ) { /* Translate the generic region definition contained in - xRegions into the CM3 specific MPU settings that are then - stored in xMPUSettings. */ + * xRegions into the CM3 specific MPU settings that are then + * stored in xMPUSettings. */ xMPUSettings->xRegion[ ul ].ulRegionBaseAddress = ( ( uint32_t ) xRegions[ lIndex ].pvBaseAddress ) | ( portMPU_REGION_VALID ) | @@ -750,48 +812,46 @@ uint32_t ul; ucCurrentPriority = pcInterruptPriorityRegisters[ ulCurrentInterrupt ]; /* The following assertion will fail if a service routine (ISR) for - an interrupt that has been assigned a priority above - configMAX_SYSCALL_INTERRUPT_PRIORITY calls an ISR safe FreeRTOS API - function. ISR safe FreeRTOS API functions must *only* be called - from interrupts that have been assigned a priority at or below - configMAX_SYSCALL_INTERRUPT_PRIORITY. - - Numerically low interrupt priority numbers represent logically high - interrupt priorities, therefore the priority of the interrupt must - be set to a value equal to or numerically *higher* than - configMAX_SYSCALL_INTERRUPT_PRIORITY. - - Interrupts that use the FreeRTOS API must not be left at their - default priority of zero as that is the highest possible priority, - which is guaranteed to be above configMAX_SYSCALL_INTERRUPT_PRIORITY, - and therefore also guaranteed to be invalid. - - FreeRTOS maintains separate thread and ISR API functions to ensure - interrupt entry is as fast and simple as possible. - - The following links provide detailed information: - http://www.freertos.org/RTOS-Cortex-M3-M4.html - http://www.freertos.org/FAQHelp.html */ + * an interrupt that has been assigned a priority above + * configMAX_SYSCALL_INTERRUPT_PRIORITY calls an ISR safe FreeRTOS API + * function. ISR safe FreeRTOS API functions must *only* be called + * from interrupts that have been assigned a priority at or below + * configMAX_SYSCALL_INTERRUPT_PRIORITY. + + * Numerically low interrupt priority numbers represent logically high + * interrupt priorities, therefore the priority of the interrupt must + * be set to a value equal to or numerically *higher* than + * configMAX_SYSCALL_INTERRUPT_PRIORITY. + + * Interrupts that use the FreeRTOS API must not be left at their + * default priority of zero as that is the highest possible priority, + * which is guaranteed to be above configMAX_SYSCALL_INTERRUPT_PRIORITY, + * and therefore also guaranteed to be invalid. + + * FreeRTOS maintains separate thread and ISR API functions to ensure + * interrupt entry is as fast and simple as possible. + + * The following links provide detailed information: + * http://www.freertos.org/RTOS-Cortex-M3-M4.html + * http://www.freertos.org/FAQHelp.html */ configASSERT( ucCurrentPriority >= ucMaxSysCallPriority ); } /* Priority grouping: The interrupt controller (NVIC) allows the bits - that define each interrupt's priority to be split between bits that - define the interrupt's pre-emption priority bits and bits that define - the interrupt's sub-priority. For simplicity all bits must be defined - to be pre-emption priority bits. The following assertion will fail if - this is not the case (if some bits represent a sub-priority). - - If the application only uses CMSIS libraries for interrupt - configuration then the correct setting can be achieved on all Cortex-M - devices by calling NVIC_SetPriorityGrouping( 0 ); before starting the - scheduler. Note however that some vendor specific peripheral libraries - assume a non-zero priority group setting, in which cases using a value - of zero will result in unpredicable behaviour. */ + * that define each interrupt's priority to be split between bits that + * define the interrupt's pre-emption priority bits and bits that define + * the interrupt's sub-priority. For simplicity all bits must be defined + * to be pre-emption priority bits. The following assertion will fail if + * this is not the case (if some bits represent a sub-priority). + + * If the application only uses CMSIS libraries for interrupt + * configuration then the correct setting can be achieved on all Cortex-M + * devices by calling NVIC_SetPriorityGrouping( 0 ); before starting the + * scheduler. Note however that some vendor specific peripheral libraries + * assume a non-zero priority group setting, in which cases using a value + * of zero will result in unpredicable behaviour. */ configASSERT( ( portAIRCR_REG & portPRIORITY_GROUP_MASK ) <= ulMaxPRIGROUPValue ); } #endif /* configASSERT_DEFINED */ /*-----------------------------------------------------------*/ - - diff --git a/FreeRTOS/Source/portable/GCC/ARM_CM3_MPU/portmacro.h b/FreeRTOS/Source/portable/GCC/ARM_CM3_MPU/portmacro.h index ff8ddb6c6..415255f6f 100644 --- a/FreeRTOS/Source/portable/GCC/ARM_CM3_MPU/portmacro.h +++ b/FreeRTOS/Source/portable/GCC/ARM_CM3_MPU/portmacro.h @@ -73,12 +73,13 @@ typedef unsigned long UBaseType_t; #define portUSING_MPU_WRAPPERS 1 #define portPRIVILEGE_BIT ( 0x80000000UL ) -#define portMPU_REGION_READ_WRITE ( 0x03UL << 24UL ) -#define portMPU_REGION_PRIVILEGED_READ_ONLY ( 0x05UL << 24UL ) -#define portMPU_REGION_READ_ONLY ( 0x06UL << 24UL ) -#define portMPU_REGION_PRIVILEGED_READ_WRITE ( 0x01UL << 24UL ) -#define portMPU_REGION_CACHEABLE_BUFFERABLE ( 0x07UL << 16UL ) -#define portMPU_REGION_EXECUTE_NEVER ( 0x01UL << 28UL ) +#define portMPU_REGION_READ_WRITE ( 0x03UL << 24UL ) +#define portMPU_REGION_PRIVILEGED_READ_ONLY ( 0x05UL << 24UL ) +#define portMPU_REGION_READ_ONLY ( 0x06UL << 24UL ) +#define portMPU_REGION_PRIVILEGED_READ_WRITE ( 0x01UL << 24UL ) +#define portMPU_REGION_PRIVILEGED_READ_WRITE_UNPRIV_READ_ONLY ( 0x02UL << 24UL ) +#define portMPU_REGION_CACHEABLE_BUFFERABLE ( 0x07UL << 16UL ) +#define portMPU_REGION_EXECUTE_NEVER ( 0x01UL << 28UL ) #define portUNPRIVILEGED_FLASH_REGION ( 0UL ) #define portPRIVILEGED_FLASH_REGION ( 1UL ) @@ -293,6 +294,11 @@ portFORCE_INLINE static void vPortSetBASEPRI( uint32_t ulNewMaskValue ) #define portMEMORY_BARRIER() __asm volatile( "" ::: "memory" ) +#ifndef configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY + #warning "configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY is not defined. We recommend defining it to 1 in FreeRTOSConfig.h for better security." + #define configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY 0 +#endif +/*-----------------------------------------------------------*/ #ifdef __cplusplus } #endif